. ./tool/ventoy_lib.sh
print_usage() {
+
echo 'Usage: Ventoy2Disk.sh CMD [ OPTION ] /dev/sdX'
echo ' CMD:'
echo ' -i install ventoy to sdX (fail if disk already installed with ventoy)'
echo ''
}
+
RESERVE_SIZE_MB=0
while [ -n "$1" ]; do
if [ "$1" = "-i" ]; then
RESERVE_SPACE="YES"
shift
RESERVE_SIZE_MB=$1
+ elif [ "$1" = "-V" ] || [ "$1" = "--version" ]; then
+ exit 0
+ elif [ "$1" == "-h" ] || [ "$1" = "--help" ]; then
+ print_usage
+ exit 0
else
if ! [ -b "$1" ]; then
vterr "$1 is NOT a valid device"
fi
fi
+#check access
if dd if="$DISK" of=/dev/null bs=1 count=1 >/dev/null 2>&1; then
vtdebug "root permission check ok ..."
else
vtdebug "MODE=$MODE FORCE=$FORCE RESERVE_SPACE=$RESERVE_SPACE RESERVE_SIZE_MB=$RESERVE_SIZE_MB"
-if ! check_tool_work_ok; then
+#check tools
+if check_tool_work_ok; then
+ vtdebug "check tool work ok"
+else
vterr "Some tools can not run in current system. Please check log.txt for detail."
exit 1
fi
+#check mountpoint
grep "^$DISK" /proc/mounts | while read mtline; do
mtpnt=$(echo $mtline | awk '{print $2}')
vtdebug "Trying to umount $mtpnt ..."
umount $mtpnt >/dev/null 2>&1
done
-if swapon -s | grep -q "^${DISK}[0-9]"; then
- swapon -s | grep "^${DISK}[0-9]" | awk '{print $1}' | while read line; do
- vtdebug "Trying to swapoff $line ..."
- swapoff $line
- done
-fi
-
-
if grep "$DISK" /proc/mounts; then
vterr "$DISK is already mounted, please umount it first!"
exit 1
fi
-if swapon -s | grep -q "^${DISK}[0-9]"; then
- vterr "$DISK is used as swap, please swapoff it first!"
- exit 1
+#check swap partition
+if swapon --help 2>&1 | grep -q '^ \-s,'; then
+ if swapon -s | grep -q "^${DISK}[0-9]"; then
+ vterr "$DISK is used as swap, please swapoff it first!"
+ exit 1
+ fi
fi
if parted -v > /dev/null 2>&1; then
PARTTOOL='parted'
else
- vterr "parted is not found in the sysstem, Ventoy can't create new partition."
+ vterr "parted is not found in the system, Ventoy can't create new partitions without it."
+ vterr "You should install \"GNU parted\" first."
exit 1
fi
else
elif fdisk -v >/dev/null 2>&1; then
PARTTOOL='fdisk'
else
- vterr "Both parted and fdisk are not found in the sysstem, Ventoy can't create new partition."
+ vterr "Both parted and fdisk are not found in the system, Ventoy can't create new partitions."
exit 1
fi
fi
disk_sector_num=$(cat /sys/block/${DISK#/dev/}/size)
disk_size_gb=$(expr $disk_sector_num / 2097152)
- if [ $disk_sector_num -gt 4294967296 ]; then
+ if [ $disk_sector_num -gt 4294967296 ] && [ -z "$VTGPT" ]; then
vterr "$DISK is over 2TB size, MBR will not work on it."
exit 1
fi
vtwarn "All the data on the disk $DISK will be lost!!!"
echo ""
- read -p 'Continue? (y/n)' Answer
+ read -p 'Continue? (y/n) ' Answer
if [ "$Answer" != "y" ]; then
if [ "$Answer" != "Y" ]; then
exit 0
echo ""
vtwarn "All the data on the disk $DISK will be lost!!!"
- read -p 'Double-check. Continue? (y/n)' Answer
+ read -p 'Double-check. Continue? (y/n) ' Answer
if [ "$Answer" != "y" ]; then
if [ "$Answer" != "Y" ]; then
exit 0
fi
fi
-
if [ $disk_sector_num -le $VENTOY_SECTOR_NUM ]; then
vterr "No enough space in disk $DISK"
exit 1
cluster_sectors=64
fi
- $cmd -n ventoy -s $cluster_sectors ${DISK}1
+ PART1=$(get_disk_part_name $DISK 1)
+ PART2=$(get_disk_part_name $DISK 2)
+
+ $cmd -n ventoy -s $cluster_sectors ${PART1}
vtinfo "writing data to disk ..."
if [ -n "$VTGPT" ]; then
echo -en '\x22' | dd status=none of=$DISK conv=fsync bs=1 count=1 seek=92
- ./tool/xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2014 seek=34
+ xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2014 seek=34
echo -en '\x23' | dd of=$DISK conv=fsync bs=1 count=1 seek=17908 status=none
else
- ./tool/xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2047 seek=1
+ xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2047 seek=1
fi
- ./tool/xzcat ./ventoy/ventoy.disk.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=$VENTOY_SECTOR_NUM seek=$part2_start_sector
+ xzcat ./ventoy/ventoy.disk.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=$VENTOY_SECTOR_NUM seek=$part2_start_sector
#disk uuid
./tool/vtoy_gen_uuid | dd status=none conv=fsync of=${DISK} seek=384 bs=1 count=16
vtinfo "esp partition processing ..."
sleep 1
- mtpnt=$(grep "^${DISK}2" /proc/mounts | awk '{print $2}')
+ mtpnt=$(grep "^${PART2}" /proc/mounts | awk '{print $2}')
if [ -n "$mtpnt" ]; then
umount $mtpnt >/dev/null 2>&1
fi
vtdebug "mounting part2 ...."
for tt in 1 2 3; do
- if mount ${DISK}2 ./tmp_mnt; then
+ if mount ${PART2} ./tmp_mnt; then
vtdebug "mounting part2 success"
break
fi
- mtpnt=$(grep "^${DISK}2" /proc/mounts | awk '{print $2}')
+ mtpnt=$(grep "^${PART2}" /proc/mounts | awk '{print $2}')
if [ -n "$mtpnt" ]; then
umount $mtpnt >/dev/null 2>&1
fi
if [ "$PART1_TYPE" = "EE" ]; then
vtdebug "This is GPT partition style ..."
- ./tool/xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2014 seek=34
+ xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2014 seek=34
echo -en '\x23' | dd of=$DISK conv=fsync bs=1 count=1 seek=17908 status=none
else
vtdebug "This is MBR partition style ..."
echo -en '\x80' | dd of=$DISK conv=fsync bs=1 count=1 seek=446 status=none
echo -en '\x00' | dd of=$DISK conv=fsync bs=1 count=1 seek=462 status=none
fi
- ./tool/xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2047 seek=1
+ xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2047 seek=1
fi
- ./tool/xzcat ./ventoy/ventoy.disk.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=$VENTOY_SECTOR_NUM seek=$part2_start
+ xzcat ./ventoy/ventoy.disk.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=$VENTOY_SECTOR_NUM seek=$part2_start
sync
vtdebug "mounting part2 ...."
for tt in 1 2 3; do
- if mount ${DISK}2 ./tmp_mnt; then
+ if mount ${PART2} ./tmp_mnt; then
vtdebug "mounting part2 success"
break
fi
projects / Ventoy.git / blobdiff