. ./tool/ventoy_lib.sh
print_usage() {
-
+
echo 'Usage: Ventoy2Disk.sh CMD [ OPTION ] /dev/sdX'
echo ' CMD:'
echo ' -i install Ventoy to sdX (fails if disk already installed with Ventoy)'
- echo ' -I force install Ventoy to sdX (no matter installed or not)'
+ echo ' -I force install Ventoy to sdX (no matter if installed or not)'
echo ' -u update Ventoy in sdX'
echo ' -l list Ventoy information in sdX'
echo ''
echo ' OPTION: (optional)'
echo ' -r SIZE_MB preserve some space at the bottom of the disk (only for install)'
- echo ' -s/-S enable/disable secure boot support (default is disabled)'
+ echo ' -s/-S enable/disable secure boot support (default is enabled)'
echo ' -g use GPT partition style, default is MBR (only for install)'
echo ' -L Label of the 1st exfat partition (default is Ventoy)'
echo ' -n try non-destructive installation (only for install)'
}
+SECUREBOOT="YES"
VTNEW_LABEL='Ventoy'
RESERVE_SIZE_MB=0
while [ -n "$1" ]; do
DISK=$(readlink -e -n "$DISK")
fi
fi
-
+
shift
done
version=$(get_disk_ventoy_version $DISK)
if [ $? -eq 0 ]; then
echo "Ventoy Version in Disk: $version"
-
+
vtPart1Type=$(dd if=$DISK bs=1 count=1 skip=450 status=none | hexdump -n1 -e '1/1 "%02X"')
- if [ "$vtPart1Type" = "EE" ]; then
+ if [ "$vtPart1Type" = "EE" ]; then
echo "Disk Partition Style : GPT"
else
echo "Disk Partition Style : MBR"
fi
-
+
if check_disk_secure_boot $DISK; then
echo "Secure Boot Support : YES"
else
echo "Secure Boot Support : NO"
- fi
+ fi
else
echo "Ventoy Version: NA"
fi
fi
#check swap partition
-if swapon --help 2>&1 | grep -q '^ \-s,'; then
+if swapon --help 2>&1 | grep -q '^ -s,'; then
if swapon -s | grep -q "^${DISK}[0-9]"; then
vterr "$DISK is used as swap, please swapoff it first!"
exit 1
fi
fi
-#check access
+#check access
if dd if="$DISK" of=/dev/null bs=1 count=1 >/dev/null 2>&1; then
vtdebug "root permission check ok ..."
else
umount ./tmp_mnt >/dev/null 2>&1
rm -rf ./tmp_mnt
if [ -d ./tmp_mnt ]; then
- vterr "tmp_mnt directory exits, please delete it first."
+ vterr "tmp_mnt directory exists, please delete it first."
exit 1
fi
fi
fi
else
if parted -v > /dev/null 2>&1; then
- PARTTOOL='parted'
+ PARTTOOL='parted'
elif fdisk -v >/dev/null 2>&1; then
- PARTTOOL='fdisk'
+ PARTTOOL='fdisk'
else
vterr "Both parted and fdisk are not found in the system, Ventoy can't create new partitions."
exit 1
fi
fi
+ if [ "$PARTTOOL" = "parted" ]; then
+ if parted -s $DISK p 2>&1 | grep -i -q 'sector size.*4096.*4096'; then
+ vterr "Currently Ventoy does not support 4K native device."
+ exit 1
+ fi
+ else
+ if fdisk -l $DISK | grep -i -q 'sector size.*4096.*4096'; then
+ vterr "Currently Ventoy does not support 4K native device."
+ exit 1
+ fi
+ fi
+
+
version=$(get_disk_ventoy_version $DISK)
if [ $? -eq 0 ]; then
if [ -z "$FORCE" ]; then
exit 1
fi
fi
-
+
disk_sector_num=$(cat /sys/block/${DISK#/dev/}/size)
disk_size_gb=$(expr $disk_sector_num / 2097152)
if [ -n "$RESERVE_SPACE" ]; then
sum_size_mb=$(expr $RESERVE_SIZE_MB + $VENTOY_PART_SIZE_MB)
reserve_sector_num=$(expr $sum_size_mb \* 2048)
-
+
if [ $disk_sector_num -le $reserve_sector_num ]; then
vterr "Can't reserve $RESERVE_SIZE_MB MB space from $DISK"
exit 1
#Print disk info
echo "Disk : $DISK"
parted -s $DISK p 2>&1 | grep Model
- echo "Size : $disk_size_gb GB"
+ echo "Size : $disk_size_gb GB"
if [ -n "$VTGPT" ]; then
echo "Style: GPT"
else
echo "Style: MBR"
- fi
+ fi
echo ''
if [ -n "$RESERVE_SPACE" ]; then
fi
fi
- if [ $disk_sector_num -le $VENTOY_SECTOR_NUM ]; then
+ if [ $disk_sector_num -le $VENTOY_SECTOR_NUM ]; then
vterr "No enough space in disk $DISK"
exit 1
fi
cluster_sectors=64
fi
- PART1=$(get_disk_part_name $DISK 1)
- PART2=$(get_disk_part_name $DISK 2)
+ PART1=$(get_disk_part_name $DISK 1)
+ PART2=$(get_disk_part_name $DISK 2)
#clean part2
dd status=none conv=fsync if=/dev/zero of=$DISK bs=512 count=32 seek=$part2_start_sector
vterr "${PART1} NOT exist"
fi
- vtinfo "writing data to disk ..."
+ vtinfo "writing data to disk ..."
dd status=none conv=fsync if=./boot/boot.img of=$DISK bs=1 count=446
-
+
if [ -n "$VTGPT" ]; then
- echo -en '\x22' | dd status=none of=$DISK conv=fsync bs=1 count=1 seek=92
+ echo -en '\x22' | dd status=none of=$DISK conv=fsync bs=1 count=1 seek=92
xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2014 seek=34
echo -en '\x23' | dd of=$DISK conv=fsync bs=1 count=1 seek=17908 status=none
else
# check and umount
check_umount_disk "$DISK"
-
+
xzcat ./ventoy/ventoy.disk.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=$VENTOY_SECTOR_NUM seek=$part2_start_sector
-
+
#test UUID
testUUIDStr=$(vtoy_gen_uuid | hexdump -C)
vtdebug "test uuid: $testUUIDStr"
-
+
#disk uuid
vtoy_gen_uuid | dd status=none conv=fsync of=${DISK} seek=384 bs=1 count=16
-
+
#disk signature
vtoy_gen_uuid | dd status=none conv=fsync of=${DISK} skip=12 seek=440 bs=1 count=4
vtinfo "sync data ..."
sync
-
+
vtinfo "esp partition processing ..."
+
if [ "$SECUREBOOT" != "YES" ]; then
sleep 2
check_umount_disk "$DISK"
PART1_BLKID=$(blkid $PART1)
blkid $PART1
- if echo $PART1_BLKID | egrep -q -i 'TYPE=ntfs|TYPE=.ntfs'; then
+ if echo $PART1_BLKID | grep -E -q -i 'TYPE=ntfs|TYPE=.ntfs'; then
echo "Partition 1 contains NTFS filesystem"
which ntfsresize
echo "###[FAIL] ntfsresize failed."
exit 1
fi
- elif echo $PART1_BLKID | egrep -q -i 'TYPE=ext[2-4]|TYPE=.ext[2-4]'; then
+ elif echo $PART1_BLKID | grep -E -q -i 'TYPE=ext[2-4]|TYPE=.ext[2-4]'; then
echo "Partition 1 contains EXT filesystem"
which resize2fs
vtinfo "Upgrade operation is safe, all the data in the 1st partition (iso files and other) will be unchanged!"
echo ""
- read -p "Update Ventoy $oldver ===> $curver Continue? (y/n)" Answer
+ read -p "Update Ventoy $oldver ===> $curver Continue? (y/n) " Answer
if [ "$Answer" != "y" ]; then
if [ "$Answer" != "Y" ]; then
exit 0
PART2=$(get_disk_part_name $DISK 2)
SHORT_PART2=${PART2#/dev/}
part2_start=$(cat /sys/class/block/$SHORT_PART2/start)
-
+
PART1_TYPE=$(dd if=$DISK bs=1 count=1 skip=450 status=none | hexdump -n1 -e '1/1 "%02X"')
-
+
#reserve disk uuid
rm -f ./diskuuid.bin
dd status=none conv=fsync if=${DISK} skip=384 bs=1 count=16 of=./diskuuid.bin
-
+
dd status=none conv=fsync if=./boot/boot.img of=$DISK bs=1 count=440
dd status=none conv=fsync if=./diskuuid.bin of=$DISK bs=1 count=16 seek=384
rm -f ./diskuuid.bin
dd status=none conv=fsync if=${DISK} skip=2040 bs=512 count=8 of=./rsvdata.bin
if [ "$PART1_TYPE" = "EE" ]; then
- vtdebug "This is GPT partition style ..."
+ vtdebug "This is GPT partition style ..."
echo -en '\x22' | dd status=none of=$DISK conv=fsync bs=1 count=1 seek=92
xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2014 seek=34
echo -en '\x23' | dd of=$DISK conv=fsync bs=1 count=1 seek=17908 status=none
else
vtdebug "This is MBR partition style ..."
-
+
PART1_ACTIVE=$(dd if=$DISK bs=1 count=1 skip=446 status=none | hexdump -n1 -e '1/1 "%02X"')
PART2_ACTIVE=$(dd if=$DISK bs=1 count=1 skip=462 status=none | hexdump -n1 -e '1/1 "%02X"')
-
+
vtdebug "PART1_ACTIVE=$PART1_ACTIVE PART2_ACTIVE=$PART2_ACTIVE"
if [ "$PART1_ACTIVE" = "00" ] && [ "$PART2_ACTIVE" = "80" ]; then
vtdebug "change 1st partition active, 2nd partition inactive ..."
vtoycli partresize -s $DISK $part2_start
fi
+
+ if [ "$PART1_TYPE" = "EE" ]; then
+ vtinfo "update esp partition attribute"
+ vtoycli gpt -f $DISK
+ sync
+ fi
+
+
echo ""
vtinfo "Update Ventoy on $DISK successfully finished."
echo ""
-
+
fi
projects / Ventoy.git / blobdiff