1. grub2 mode supports Porteus ISO file.

[Ventoy.git] / INSTALL / grub / grub.cfg

diff --git a/INSTALL/grub/grub.cfg b/INSTALL/grub/grub.cfg
index 33789ac9b5433911948a64a1346290ce70d5e1d8..c198879d946cca05308627fd7dfd97210a6150cf 100644 (file)
--- a/INSTALL/grub/grub.cfg
+++ b/INSTALL/grub/grub.cfg
@@ -16,6 +16,12 @@
 # 
 #************************************************************************************
 
 # 
 #************************************************************************************
 

+if [ "$grub_platform" = "pc" ]; then
+    insmod setkey
+    insmod regexp
+    insmod video_fb
+fi
+

 function ventoy_pause {
     echo "press Enter to continue ......"
     read vtTmpPause
 function ventoy_pause {
     echo "press Enter to continue ......"
     read vtTmpPause


@@ -44,15 +50,37 @@ function ventoy_gui_console {
     fi    
 }
 
     fi    
 }
 

-function ventoy_power {
-    configfile $prefix/power.cfg
+function ventoy_acpi_param {  
+    if [ "$VTOY_PARAM_NO_ACPI" != "1" ]; then
+        vt_acpi_param "$1" "$2"
+    fi
+}
+
+function ventoy_vcfg_proc {
+    if vt_check_custom_boot "${1}" vt_vcfg; then
+        set vtoy_chosen_path="${1}"
+        vt_file_basefile "${vtoy_chosen_path}" vtoy_chosen_file
+        
+        export vtoy_chosen_path
+        export vtoy_chosen_file
+        ventoy_debug_pause
+        configfile "${vtoy_iso_part}${vt_vcfg}"
+        true
+    else
+        false
+    fi
+}
+
+function ventoy_language {
+    configfile $prefix/menulang.cfg

 }
 
 }
 

-function ventoy_diagnosis {    
+function ventoy_diagnosis {
+    vt_enum_video_mode    

     configfile $prefix/debug.cfg
 }
 
     configfile $prefix/debug.cfg
 }
 

-function ventoy_localboot {    
+function ventoy_localboot {

     configfile $prefix/localboot.cfg
 }
 
     configfile $prefix/localboot.cfg
 }
 


@@ -63,20 +91,55 @@ function ventoy_ext_menu {
         unset ventoy_new_context
     else
        echo "ventoy_grub.cfg NOT exist."
         unset ventoy_new_context
     else
        echo "ventoy_grub.cfg NOT exist."

-       echo -e "\npress ENTER to exit ..."
+       echo -en "\n$VTLANG_ENTER_EXIT ..."

        read vtInputKey
     fi
 }
 
        read vtInputKey
     fi
 }
 

+function ventoy_checksum {
+    if [ -f "${vtoy_iso_part}${VTOY_CHKSUM_FILE_PATH}" ]; then
+        configfile $prefix/checksum.cfg
+    fi
+}
+
+function ventoy_show_help {
+    if [ -f $prefix/help.tar.gz ]; then
+        if [ -z "$vtoy_help_txt_mem_addr" ]; then
+            vt_load_file_to_mem "auto" $prefix/help.tar.gz vtoy_help_txt_mem
+        fi
+
+        loopback vt_help_tarfs mem:${vtoy_help_txt_mem_addr}:size:${vtoy_help_txt_mem_size}
+        vt_cur_menu_lang vtCurLang
+        if [ -f "(vt_help_tarfs)/help/${vtCurLang}.txt" ]; then
+            cat "(vt_help_tarfs)/help/${vtCurLang}.txt"
+        else
+            cat "(vt_help_tarfs)/help/en_US.txt"
+        fi        
+        loopback -d vt_help_tarfs
+    fi
+}
+
+function ventoy_load_menu_lang_file {
+    vt_load_file_to_mem "auto" $vtoy_efi_part/grub/menu.tar.gz vtoy_menu_lang_mem
+    loopback vt_menu_tarfs mem:${vtoy_menu_lang_mem_addr}:size:${vtoy_menu_lang_mem_size}    
+}
+

 function get_os_type {
     set vtoy_os=Linux
 function get_os_type {
     set vtoy_os=Linux

-    
-    for file in "efi/microsoft/boot/bcd" "sources/boot.wim" "boot/bcd" "bootmgr.efi" "boot/etfsboot.com" ; do        
-        if vt_file_exist_nocase (loop)/$file; then        
+    export vtoy_os
+
+    if vt_str_begin "$vt_volume_id" "DLC Boot"; then
+        if [ -f (loop)/DLCBoot.exe ]; then

             set vtoy_os=Windows
             set vtoy_os=Windows

-            break

         fi
         fi

-    done
+    else
+        for file in "efi/microsoft/boot/bcd" "sources/boot.wim" "boot/bcd" "bootmgr.efi" "boot/etfsboot.com" ; do        
+            if vt_file_exist_nocase (loop)/$file; then        
+                set vtoy_os=Windows            
+                break
+            fi
+        done
+    fi

 
     if [ "$vtoy_os" = "Linux" ]; then
         if vt_strstr "$vt_system_id" "FreeBSD"; then
 
     if [ "$vtoy_os" = "Linux" ]; then
         if vt_strstr "$vt_system_id" "FreeBSD"; then


@@ -85,6 +148,12 @@ function get_os_type {
         elif [ -e (loop)/bin/freebsd-version ]; then
             set vtoy_os=Unix
             set vt_unix_type=FreeBSD
         elif [ -e (loop)/bin/freebsd-version ]; then
             set vtoy_os=Unix
             set vt_unix_type=FreeBSD

+        elif [ -e (loop)/boot/kernel/geom_ventoy.ko ]; then
+            set vtoy_os=Unix
+            set vt_unix_type=FreeBSD
+        elif vt_str_begin "$vt_system_id" "DragonFly"; then
+            set vtoy_os=Unix
+            set vt_unix_type=DragonFly

             
             
         elif [ -e (loop)/boot/kernel/kernel ]; then            
             
             
         elif [ -e (loop)/boot/kernel/kernel ]; then            


@@ -99,15 +168,28 @@ function get_os_type {
     fi
 
     if [ -n "${vtdebug_flag}" ]; then
     fi
 
     if [ -n "${vtdebug_flag}" ]; then

-        echo ISO is $vtoy_os
+        echo ISO is "$vtoy_os"

     fi
 }
 
 function vt_check_compatible_pe {
     #Check for PE without external tools
     fi
 }
 
 function vt_check_compatible_pe {
     #Check for PE without external tools

-    if [ -f $1/HBCD_PE.ini ]; then
-        set ventoy_compatible=YES        
+    #set compatible if ISO file is less than 80MB
+    if [ $vt_chosen_size -GT 33554432 -a $vt_chosen_size -LE 83886080 ]; then
+        set ventoy_compatible=YES    
+    fi
+
+    return
+}
+
+function vt_check_compatible_linux {
+    if vt_str_begin "$vt_volume_id" "embootkit"; then
+        set ventoy_compatible=YES
+    elif [ -e "$1/casper/tinycore.gz" ]; then
+        set ventoy_compatible=YES

     fi
     fi

+
+    return

 }
 
 function locate_initrd {
 }
 
 function locate_initrd {


@@ -120,7 +202,7 @@ function locate_initrd {
 }
 
 function locate_wim {
 }
 
 function locate_wim {

-    vt_windows_locate_wim_patch (loop)
+    vt_windows_locate_wim_patch (loop) "$1"

     
     if [ -n "${vtdebug_flag}" ]; then
         echo '###############################################'
     
     if [ -n "${vtdebug_flag}" ]; then
         echo '###############################################'


@@ -136,13 +218,28 @@ function distro_specify_wim_patch {
         vt_windows_collect_wim_patch wim /BOOT/H3_7PE.WIM
         vt_windows_collect_wim_patch wim /BOOT/H3_8PE.WIM
         vt_windows_collect_wim_patch wim /BOOT/H3_81PE.WIM
         vt_windows_collect_wim_patch wim /BOOT/H3_7PE.WIM
         vt_windows_collect_wim_patch wim /BOOT/H3_8PE.WIM
         vt_windows_collect_wim_patch wim /BOOT/H3_81PE.WIM

-    fi
+    elif [ -d (loop)/2k10/winpe ]; then
+        vt_windows_collect_wim_patch wim /2k10/winpe/w1086pe.wim
+        vt_windows_collect_wim_patch wim /2k10/winpe/w8x86pe.wim
+        vt_windows_collect_wim_patch wim /2k10/winpe/w7x86pe.wim
+    fi  

 }
 
 function distro_specify_wim_patch_phase2 {
     if [ -f (loop)/boot/boot.wim ]; then
         vt_windows_collect_wim_patch wim /boot/boot.wim
 }
 
 function distro_specify_wim_patch_phase2 {
     if [ -f (loop)/boot/boot.wim ]; then
         vt_windows_collect_wim_patch wim /boot/boot.wim

+    elif [ -f (loop)/sources/boot.wim ]; then
+        vt_windows_collect_wim_patch wim /sources/boot.wim
+    fi
+
+    if vt_str_begin "$vt_volume_id" "DLC Boot"; then
+        for vwfile in "/DLC1/WinPE/W11x64.wim" "/DLC1/WinPE/W10x64.wim" "/DLC1/WinPE/W10x86.wim"; do
+            if [ -f (loop)/$vwfile ]; then
+                vt_windows_collect_wim_patch wim $vwfile
+            fi
+        done

     fi
     fi

+    

 }
 
 
 }
 
 


@@ -169,18 +266,39 @@ function distro_specify_initrd_file {
         vt_linux_specify_initrd_file /initrd.gz
     elif [ -e (loop)/slax/boot/initrfs.img ]; then
         vt_linux_specify_initrd_file /slax/boot/initrfs.img
         vt_linux_specify_initrd_file /initrd.gz
     elif [ -e (loop)/slax/boot/initrfs.img ]; then
         vt_linux_specify_initrd_file /slax/boot/initrfs.img

+    elif [ -e (loop)/minios/boot/initrfs.img ]; then
+        vt_linux_specify_initrd_file /minios/boot/initrfs.img

     elif [ -e (loop)/pmagic/initrd.img ]; then
         vt_linux_specify_initrd_file /pmagic/initrd.img
     elif [ -e (loop)/boot/initrd.xz ]; then
         vt_linux_specify_initrd_file /boot/initrd.xz
     elif [ -e (loop)/pmagic/initrd.img ]; then
         vt_linux_specify_initrd_file /pmagic/initrd.img
     elif [ -e (loop)/boot/initrd.xz ]; then
         vt_linux_specify_initrd_file /boot/initrd.xz

+    elif [ -e (loop)/boot/initrd.gz ]; then
+        vt_linux_specify_initrd_file /boot/initrd.gz

     elif [ -f (loop)/boot/initrd ]; then
         vt_linux_specify_initrd_file /boot/initrd
     elif [ -f (loop)/boot/x86_64/loader/initrd ]; then
         vt_linux_specify_initrd_file /boot/x86_64/loader/initrd
     elif [ -f (loop)/boot/initramfs-x86_64.img ]; then
         vt_linux_specify_initrd_file /boot/initramfs-x86_64.img
     elif [ -f (loop)/boot/initrd ]; then
         vt_linux_specify_initrd_file /boot/initrd
     elif [ -f (loop)/boot/x86_64/loader/initrd ]; then
         vt_linux_specify_initrd_file /boot/x86_64/loader/initrd
     elif [ -f (loop)/boot/initramfs-x86_64.img ]; then
         vt_linux_specify_initrd_file /boot/initramfs-x86_64.img

+    elif [ -f (loop)/boot/isolinux/initramfs_data64.cpio.gz ]; then 
+        vt_linux_specify_initrd_file /boot/isolinux/initramfs_data64.cpio.gz
+    elif [ -f (loop)/boot/initrd.img ]; then 
+        vt_linux_specify_initrd_file /boot/initrd.img

         
         

-
+    fi
+    
+    if [ -f (loop)/isolinux/initrd.gz ]; then 
+        vt_linux_specify_initrd_file /isolinux/initrd.gz
+    fi
+    
+    if vt_str_begin "$vt_volume_id" "QUBES"; then 
+        vt_linux_specify_initrd_file /images/pxeboot/initrd.img
+    fi
+    
+    if [ "$vt_chosen_size" = "1133375488" ]; then
+        if [ -d (loop)/boot/grub/x86_64-efi ]; then
+            vt_cpio_busybox64 "64h"
+        fi

     fi
 }
 
     fi
 }
 


@@ -209,6 +327,11 @@ function distro_specify_initrd_file_phase2 {
         if [ -f (loop)/parabola/boot/i686/parabolaiso.img ]; then 
             vt_linux_specify_initrd_file /parabola/boot/i686/parabolaiso.img
         fi
         if [ -f (loop)/parabola/boot/i686/parabolaiso.img ]; then 
             vt_linux_specify_initrd_file /parabola/boot/i686/parabolaiso.img
         fi

+    elif [ -f (loop)/parabola/boot/x86_64/initramfs-linux-libre.img ]; then
+        vt_linux_specify_initrd_file /parabola/boot/x86_64/initramfs-linux-libre.img
+        if [ -f (loop)/parabola/boot/i686/initramfs-linux-libre.img ]; then
+            vt_linux_specify_initrd_file /parabola/boot/i686/initramfs-linux-libre.img
+        fi

     elif [ -f (loop)/hyperbola/boot/x86_64/hyperiso.img ]; then 
         vt_linux_specify_initrd_file /hyperbola/boot/x86_64/hyperiso.img
         if [ -f (loop)/hyperbola/boot/i686/hyperiso.img ]; then 
     elif [ -f (loop)/hyperbola/boot/x86_64/hyperiso.img ]; then 
         vt_linux_specify_initrd_file /hyperbola/boot/x86_64/hyperiso.img
         if [ -f (loop)/hyperbola/boot/i686/hyperiso.img ]; then 


@@ -224,20 +347,68 @@ function distro_specify_initrd_file_phase2 {
         vt_linux_specify_initrd_file /initrd
     elif [ -f (loop)/live/initrd1 ]; then 
         vt_linux_specify_initrd_file /live/initrd1
         vt_linux_specify_initrd_file /initrd
     elif [ -f (loop)/live/initrd1 ]; then 
         vt_linux_specify_initrd_file /live/initrd1

-    elif vt_strstr $vt_volume_id "Daphile"; then
+    elif [ -f (loop)/isolinux/initrd.img ]; then 
+        vt_linux_specify_initrd_file /isolinux/initrd.img
+    elif [ -f (loop)/isolinux/initrd.gz ]; then 
+        vt_linux_specify_initrd_file /isolinux/initrd.gz
+    elif [ -f (loop)/syslinux/kernel/initramfs.gz ]; then 
+        vt_linux_specify_initrd_file /syslinux/kernel/initramfs.gz    
+    elif vt_strstr "$vt_volume_id" "Daphile"; then

         vt_linux_parse_initrd_isolinux   (loop)/isolinux/
         vt_linux_parse_initrd_isolinux   (loop)/isolinux/

+    elif [ -f (loop)/boot/rootfs.xz ]; then 
+        vt_linux_specify_initrd_file /boot/rootfs.xz
+        if [ "$grub_platform" != "pc" ]; then
+            vt_add_replace_file 0 "minimal\\x86_64\\rootfs.xz"
+        fi
+    elif [ -f (loop)/arch/boot/x86_64/archiso.img ]; then 
+        vt_linux_specify_initrd_file /arch/boot/x86_64/archiso.img
+        if [ "$grub_platform" != "pc" ]; then
+            vt_add_replace_file 0 "EFI\\archiso\\archiso.img"
+        fi
+    elif [ -f (loop)/blackarch/boot/x86_64/archiso.img ]; then 
+        vt_linux_specify_initrd_file /blackarch/boot/x86_64/archiso.img
+    elif [ -f (loop)/blackarch/boot/x86_64/initramfs-linux.img ]; then 
+        vt_linux_specify_initrd_file /blackarch/boot/x86_64/initramfs-linux.img

         
         

+    elif [ -f (loop)/install.amd/initrd.gz ]; then
+        vt_linux_specify_initrd_file /live/initrd2.img
+        vt_linux_specify_initrd_file /install.amd/initrd.gz
+        vt_linux_specify_initrd_file /install.amd/gtk/initrd.gz
+    elif [ -f (loop)/boot/grub/kernels.cfg ]; then
+        vt_linux_parse_initrd_grub  file  (loop)/boot/grub/kernels.cfg
+    elif [ -f (loop)/austrumi/initrd.gz ]; then
+        vt_linux_specify_initrd_file /austrumi/initrd.gz
+        if [ -f (loop)/EFI/BOOT/bootx64.efi ]; then
+            vt_cpio_busybox64 "64h"
+        fi
+    elif [ -f (loop)/boot/initfs.x86_64-efi ]; then
+        vt_linux_specify_initrd_file /boot/initfs.x86_64-efi
+        if [ -f (loop)/boot/initfs.i386-pc ]; then
+            vt_linux_specify_initrd_file /boot/initfs.i386-pc
+        fi
+    elif [ -f (loop)/antiX/initrd.gz ]; then
+        vt_linux_specify_initrd_file /antiX/initrd.gz
+    elif [ -f (loop)/360Disk/initrd.gz ]; then
+        vt_linux_specify_initrd_file /360Disk/initrd.gz
+    elif [ -f (loop)/porteus/initrd.xz ]; then
+        vt_linux_specify_initrd_file /porteus/initrd.xz
+    elif [ -f (loop)/pyabr/boot/initrfs.img ]; then
+        vt_linux_specify_initrd_file /pyabr/boot/initrfs.img
+    elif [ -f (loop)/initrd0.img ]; then
+        vt_linux_specify_initrd_file /initrd0.img
+    elif [ -f (loop)/sysresccd/boot/i686/sysresccd.img ]; then
+        vt_linux_specify_initrd_file /sysresccd/boot/i686/sysresccd.img
+    elif [ -f (loop)/boot/full.cz ]; then
+        vt_linux_specify_initrd_file /boot/full.cz
+    elif [ -f (loop)/images/pxeboot/initrd.img ]; then
+        vt_linux_specify_initrd_file /images/pxeboot/initrd.img
+

     fi
 }
 
 function ventoy_get_ghostbsd_ver {
     fi
 }
 
 function ventoy_get_ghostbsd_ver {

-
-    # vt_parse_iso_create_date $1/${chosen_path} vt_create_date    
-    # if regexp "^202005" "$vt_create_date"; then
-        # set vt_freebsd_ver=12.x
-    # fi
-    
-    set vt_freebsd_ver=12.x
+    # fallback to parse version from elf /boot/kernel/kernel
+    set vt_freebsd_ver=xx

 }
 
 function ventoy_get_furybsd_ver {
 }
 
 function ventoy_get_furybsd_ver {


@@ -263,13 +434,48 @@ function ventoy_get_freenas_ver {
     fi
 }
 
     fi
 }
 

+function ventoy_get_truenas_ver {   
+    set vt_freebsd_ver=12.x
+
+    if [ -e (loop)/TrueNAS-MANIFEST ]; then
+        vt_parse_freenas_ver (loop)/TrueNAS-MANIFEST vt_truenas_ver
+        if regexp "^13\.[0-9]" "$vt_truenas_ver"; then
+            set vt_freebsd_ver=13.x
+        elif regexp "^12\.[0-9]" "$vt_truenas_ver"; then
+            set vt_freebsd_ver=12.x
+        elif regexp "^11\.[0-9]" "$vt_truenas_ver"; then
+            set vt_freebsd_ver=11.x
+        fi
+    fi
+}
+
+function ventoy_get_midnightbsd_ver {   
+    if vt_str_begin "$vt_volume_id" "1_"; then
+        set vt_freebsd_ver=11.x
+    elif vt_str_begin "$vt_volume_id" "2_"; then
+        set vt_freebsd_ver=2.x
+    elif vt_str_begin "$vt_volume_id" "3_"; then
+        set vt_freebsd_ver=3.x
+    fi
+}
+

 function ventoy_freebsd_proc {
 function ventoy_freebsd_proc {

+    set vtFreeBsdDistro=FreeBSD
+    set vt_freebsd_ver=xx
+
+    if [ -e (loop)/boot/kernel/geom_ventoy.ko ]; then
+        vt_unix_ko_fillmap /boot/kernel/geom_ventoy.ko
+        return
+    fi
+

     if vt_strstr "$vt_volume_id" "GHOSTBSD"; then
     if vt_strstr "$vt_volume_id" "GHOSTBSD"; then

-        ventoy_get_ghostbsd_ver $1 ${chosen_path}
+        ventoy_get_ghostbsd_ver "$1" "${chosen_path}"

     elif vt_strstr "$vt_volume_id" "FREENAS"; then
     elif vt_strstr "$vt_volume_id" "FREENAS"; then

-        ventoy_get_freenas_ver $1 ${chosen_path}   
+        ventoy_get_freenas_ver "$1" "${chosen_path}"
+    elif vt_strstr "$vt_volume_id" "TRUENAS"; then
+        ventoy_get_truenas_ver "$1" "${chosen_path}"

     elif vt_strstr "$vt_volume_id" "FURYBSD"; then
     elif vt_strstr "$vt_volume_id" "FURYBSD"; then

-        ventoy_get_furybsd_ver $1 ${chosen_path}   
+        ventoy_get_furybsd_ver "$1" "${chosen_path}"  

     elif regexp "^13_[0-9]" "$vt_volume_id"; then
         set vt_freebsd_ver=13.x
     elif regexp "^12_[0-9]" "$vt_volume_id"; then
     elif regexp "^13_[0-9]" "$vt_volume_id"; then
         set vt_freebsd_ver=13.x
     elif regexp "^12_[0-9]" "$vt_volume_id"; then


@@ -280,6 +486,9 @@ function ventoy_freebsd_proc {
         set vt_freebsd_ver=10.x
     elif regexp "^9_[0-9]" "$vt_volume_id"; then
         set vt_freebsd_ver=9.x
         set vt_freebsd_ver=10.x
     elif regexp "^9_[0-9]" "$vt_volume_id"; then
         set vt_freebsd_ver=9.x

+    elif [ -d (loop)/usr/midnightbsd-dist ]; then
+        ventoy_get_midnightbsd_ver "$1" "${chosen_path}"
+        set vtFreeBsdDistro=MidnightBSD

     elif [ -e (loop)/bin/freebsd-version ]; then
         vt_unix_parse_freebsd_ver (loop)/bin/freebsd-version vt_userland_ver
         if regexp "\"13\.[0-9]-" "$vt_userland_ver"; then
     elif [ -e (loop)/bin/freebsd-version ]; then
         vt_unix_parse_freebsd_ver (loop)/bin/freebsd-version vt_userland_ver
         if regexp "\"13\.[0-9]-" "$vt_userland_ver"; then


@@ -308,8 +517,11 @@ function ventoy_freebsd_proc {
         fi
     elif vt_strstr "${chosen_path}" "MidnightBSD"; then
         set vt_freebsd_ver=9.x
         fi
     elif vt_strstr "${chosen_path}" "MidnightBSD"; then
         set vt_freebsd_ver=9.x

-    else
-        set vt_freebsd_ver=12.x
+    fi
+    
+    
+    if [ -e (loop)/usr/freebsd-dist/cloninst.sh ]; then
+        set vtFreeBsdDistro=ClonOS

     fi
     
     set vt_freebsd_bit=64
     fi
     
     set vt_freebsd_bit=64


@@ -320,37 +532,77 @@ function ventoy_freebsd_proc {
             fi
             break
         fi
             fi
             break
         fi

-    done    
+    done
+
+    if [ "$vt_freebsd_ver" = "xx" ]; then
+        if [ -e (loop)/boot/kernel/kernel ]; then
+            vt_unix_parse_freebsd_ver_elf (loop)/boot/kernel/kernel $vt_freebsd_bit vt_freebsd_ver
+        elif [ -e (loop)/boot/kernel/kernel.gz ]; then
+            vt_unix_parse_freebsd_ver_elf (loop)/boot/kernel/kernel.gz $vt_freebsd_bit vt_freebsd_ver
+        fi
+        
+        if [ "$vt_freebsd_ver" = "xx" ]; then
+            set vt_freebsd_ver=13.x        
+        fi
+    fi

 
     if [ -n "${vtdebug_flag}" ]; then
 
     if [ -n "${vtdebug_flag}" ]; then

-        echo "This is FreeBSD $vt_freebsd_ver ${vt_freebsd_bit}bit"
+        echo "This is $vtFreeBsdDistro $vt_freebsd_ver ${vt_freebsd_bit}bit"

     fi
     
     unset vt_unix_mod_path
     fi
     
     unset vt_unix_mod_path

-    for file in "/COPYRIGHT" "/FreeNAS-MANIFEST" "/version" "/etc/fstab"; do   
+    for file in "/COPYRIGHT" "/FreeNAS-MANIFEST" "/TrueNAS-MANIFEST" "/version" "/etc/fstab"; do   

         if [ -e (loop)${file} ]; then                    
             set vt_unix_mod_path=${file}
             break
         fi
     done
     
         if [ -e (loop)${file} ]; then                    
             set vt_unix_mod_path=${file}
             break
         fi
     done
     

-    vt_unix_replace_ko $vt_unix_mod_path (vtunix)/ventoy_unix/FreeBSD/geom_ventoy_ko/$vt_freebsd_ver/$vt_freebsd_bit/geom_ventoy.ko.xz
-    vt_unix_replace_conf FreeBSD ${1}${chosen_path} 
+    if [ -n "$vt_unix_mod_path" ]; then
+        vt_unix_replace_ko $vt_unix_mod_path (vtunix)/ventoy_unix/$vtFreeBsdDistro/geom_ventoy_ko/$vt_freebsd_ver/$vt_freebsd_bit/geom_ventoy.ko.xz
+        vt_unix_replace_conf FreeBSD "${1}${chosen_path}"
+    elif [ -e (loop)/easyre.ufs.uzip ]; then
+        vt_unix_replace_ko "/boot/grub/i386-pc/linux.mod" (vtunix)/ventoy_unix/$vtFreeBsdDistro/geom_ventoy_ko/$vt_freebsd_ver/$vt_freebsd_bit/geom_ventoy.ko.xz
+        if [ "$grub_platform" = "pc" ]; then
+            vt_unix_replace_grub_conf "/boot/grub/i386-pc/linux.mod" "cd9"
+        else
+            vt_unix_replace_conf FreeBSD "${1}${chosen_path}" "cd9"
+        fi
+    fi
+}
+
+function ventoy_dragonfly_proc {
+
+    unset vt_unix_mod_path
+    for file in "/boot/kernel/initrd.img.gz"; do
+        if [ -e (loop)${file} ]; then                    
+            set vt_unix_mod_path=${file}
+            break
+        fi
+    done
+
+    vt_unix_replace_ko $vt_unix_mod_path ${vtoy_path}/dragonfly.mfs.xz
+    vt_unix_fill_image_desc
+    vt_unix_gzip_new_ko
+    vt_unix_replace_conf DragonFly "${1}${chosen_path}"

 }
 
 function ventoy_unix_comm_proc {
     vt_unix_reset
     
 }
 
 function ventoy_unix_comm_proc {
     vt_unix_reset
     

+    vt_unix_check_vlnk "${1}${chosen_path}"
+    

     if [ "$ventoy_compatible" = "NO" ]; then
         loopback vtunix $vtoy_efi_part/ventoy/ventoy_unix.cpio
         
         if [ "$vt_unix_type" = "FreeBSD" ]; then
     if [ "$ventoy_compatible" = "NO" ]; then
         loopback vtunix $vtoy_efi_part/ventoy/ventoy_unix.cpio
         
         if [ "$vt_unix_type" = "FreeBSD" ]; then

-            ventoy_freebsd_proc $1 ${chosen_path}        
+            ventoy_freebsd_proc "$1" "${chosen_path}"
+        elif [ "$vt_unix_type" = "DragonFly" ]; then
+            ventoy_dragonfly_proc "$1" "${chosen_path}"        

         elif [ "$vt_unix_type" = "NetBSD" ]; then
             echo "NetBSD not supported"
             
             
         elif [ "$vt_unix_type" = "NetBSD" ]; then
             echo "NetBSD not supported"
             
             

-            

         else
             if [ -n "${vtdebug_flag}" ]; then
                 echo "Unknown unix type"
         else
             if [ -n "${vtdebug_flag}" ]; then
                 echo "Unknown unix type"


@@ -358,7 +610,7 @@ function ventoy_unix_comm_proc {
         fi
     fi
     
         fi
     fi
     

-    vt_unix_chain_data ${1}${chosen_path}    
+    vt_unix_chain_data "${1}${chosen_path}"

     ventoy_debug_pause
 }
 
     ventoy_debug_pause
 }
 


@@ -366,12 +618,16 @@ function ventoy_unix_comm_proc {
 function uefi_windows_menu_func {
     vt_windows_reset
 
 function uefi_windows_menu_func {
     vt_windows_reset
 

-    if [ "$ventoy_compatible" = "NO" ]; then   
-        
+    unset vt_cur_wimboot_mode
+    if vt_check_mode 4 "$vt_chosen_name"; then
+        set vt_cur_wimboot_mode=1
+    fi
+
+    if [ "$ventoy_compatible" = "NO" -o "$vt_cur_wimboot_mode" = "1" ]; then

         if [ "$ventoy_fs_probe" = "iso9660" ]; then
             loopback -d loop
             vt_iso9660_nojoliet 1            
         if [ "$ventoy_fs_probe" = "iso9660" ]; then
             loopback -d loop
             vt_iso9660_nojoliet 1            

-            loopback loop $1$2
+            loopback loop "$1$2"

         fi
         
         for file in "efi/microsoft/boot/bcd"; do
         fi
         
         for file in "efi/microsoft/boot/bcd"; do


@@ -384,15 +640,20 @@ function uefi_windows_menu_func {
         fi
         
         ventoy_debug_pause        
         fi
         
         ventoy_debug_pause        

-        locate_wim
+        locate_wim "${chosen_path}"

     fi
     fi

-
-    vt_windows_chain_data ${1}${chosen_path}    
-    ventoy_debug_pause

     
     

+    vt_windows_chain_data "${1}${chosen_path}"
+    ventoy_debug_pause
+
+    if [ "$vt_cur_wimboot_mode" = "1" ]; then
+        vtoy_wimboot_func
+    fi
+

     if [ -n "$vtoy_chain_mem_addr" ]; then
     if [ -n "$vtoy_chain_mem_addr" ]; then

+        ventoy_acpi_param ${vtoy_chain_mem_addr} 2048

         ventoy_cli_console
         ventoy_cli_console

-        chainloader ${vtoy_path}/ventoy_x64.efi  env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+        chainloader ${vtoy_path}/ventoy_${VTOY_EFI_ARCH}.efi  env_param=${env_param} isoefi=${LoadIsoEfiDriver} iso_${ventoy_fs_probe} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}

         boot
     else
         echo "chain empty failed"
         boot
     else
         echo "chain empty failed"


@@ -400,16 +661,33 @@ function uefi_windows_menu_func {
     fi
 }
 
     fi
 }
 

+function uefi_find_replace_initrd {
+    if vt_get_efi_vdisk_offset "${1}${2}" vt_efivdisk_offset; then
+        loopback -s $vt_efivdisk_offset vtefivdisk "${1}${2}"
+        
+        unset vt_rp_initrd
+        vt_search_replace_initrd (vtefivdisk) vt_rp_initrd
+        
+        if [ -n "$vt_rp_initrd" ]; then
+            vt_add_replace_file $3 "$vt_rp_initrd"
+        fi
+
+        loopback -d vtefivdisk
+        ventoy_debug_pause
+    fi
+}
+

 function uefi_linux_menu_func {
 function uefi_linux_menu_func {

+    

     if [ "$ventoy_compatible" = "NO" ]; then    
         
         if [ "$ventoy_fs_probe" = "udf" ]; then
             loopback -d loop            
             set ventoy_fs_probe=iso9660
     if [ "$ventoy_compatible" = "NO" ]; then    
         
         if [ "$ventoy_fs_probe" = "udf" ]; then
             loopback -d loop            
             set ventoy_fs_probe=iso9660

-            loopback loop $1$2
+            loopback loop "$1$2"

         fi
         
         fi
         

-        vt_load_cpio  ${vtoy_path}/ventoy.cpio   $2 $1 "busybox=$ventoy_busybox_ver"
+        vt_load_cpio  $vtoy_path   "$2" "$1" "busybox=$ventoy_busybox_ver"

         
         vt_linux_clear_initrd
         
         
         vt_linux_clear_initrd
         


@@ -433,7 +711,11 @@ function uefi_linux_menu_func {
         distro_specify_initrd_file
         
         vt_linux_initrd_count vtcount
         distro_specify_initrd_file
         
         vt_linux_initrd_count vtcount

+        

         if [ $vtcount -eq 0 ]; then
         if [ $vtcount -eq 0 ]; then

+            if [ -e (loop)/EFI/boot/livegrub.cfg ]; then
+                vt_linux_parse_initrd_grub  file  (loop)/EFI/boot/livegrub.cfg
+            fi

             distro_specify_initrd_file_phase2
             
             if [ "$vt_efi_dir" = "NO" ]; then
             distro_specify_initrd_file_phase2
             
             if [ "$vt_efi_dir" = "NO" ]; then


@@ -451,13 +733,38 @@ function uefi_linux_menu_func {
             if [ -d (loop)/arch ]; then
                 if [ -f (loop)/arch/boot/x86_64/archiso.img ]; then
                     vt_add_replace_file $vtindex "EFI\\archiso\\archiso.img"
             if [ -d (loop)/arch ]; then
                 if [ -f (loop)/arch/boot/x86_64/archiso.img ]; then
                     vt_add_replace_file $vtindex "EFI\\archiso\\archiso.img"

+                elif [ -f (loop)/arch/boot/x86_64/initramfs-linux.img ]; then
+                    vt_add_replace_file $vtindex "arch\\boot\\x86_64\\initramfs-linux.img"

                 elif [ -f (loop)/boot/initramfs_x86_64.img ]; then
                     vt_add_replace_file $vtindex "boot\\initramfs_x86_64.img"
                 fi
                 elif [ -f (loop)/boot/initramfs_x86_64.img ]; then
                     vt_add_replace_file $vtindex "boot\\initramfs_x86_64.img"
                 fi

+            elif [ -d (loop)/blackarch ]; then
+                if [ -f (loop)/blackarch/boot/x86_64/archiso.img ]; then
+                    vt_add_replace_file $vtindex "EFI\\archiso\\archiso.img"
+                elif [ -f (loop)/blackarch/boot/x86_64/initramfs-linux.img ]; then
+                    vt_add_replace_file $vtindex "blackarch\\boot\\x86_64\\initramfs-linux.img"
+                fi
+            elif [ -d (loop)/anarchy ]; then
+                if [ -f (loop)/anarchy/boot/x86_64/initramfs-linux.img ]; then
+                    vt_add_replace_file $vtindex "anarchy\\boot\\x86_64\\initramfs-linux.img"
+                fi
+            elif [ -d (loop)/parabola ]; then
+                if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then
+                    vt_add_replace_file $vtindex "EFI\\parabolaiso\\parabolaiso.img"
+                elif [ -f (loop)/parabola/boot/x86_64/initramfs-linux-libre.img ]; then
+                    vt_add_replace_file $vtindex "parabola\\boot\\x86_64\\initramfs-linux-libre.img"
+                fi

             elif [ -f (loop)/EFI/BOOT/initrd.gz ]; then
                 vt_add_replace_file $vtindex "EFI\\BOOT\\initrd.gz"
             elif [ -f (loop)/loader/entries/thinstation.conf ]; then
                 vt_add_replace_file $vtindex "boot\\initrd"
             elif [ -f (loop)/EFI/BOOT/initrd.gz ]; then
                 vt_add_replace_file $vtindex "EFI\\BOOT\\initrd.gz"
             elif [ -f (loop)/loader/entries/thinstation.conf ]; then
                 vt_add_replace_file $vtindex "boot\\initrd"

+            elif [ -f (loop)/loader/entries/pisi-efi-x86_64.conf ]; then
+                vt_add_replace_file $vtindex "EFI\\pisi\\initrd.img"
+            fi
+
+            vt_get_replace_file_cnt vt_replace_cnt
+            if [ $vt_replace_cnt -eq 0 ]; then
+                uefi_find_replace_initrd "$1" "$2" $vtindex

             fi
         elif [ -d (loop)/EFI/boot/entries ]; then
             if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then
             fi
         elif [ -d (loop)/EFI/boot/entries ]; then
             if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then


@@ -465,19 +772,113 @@ function uefi_linux_menu_func {
             elif [ -f (loop)/hyperbola/boot/x86_64/hyperiso.img ]; then
                 vt_add_replace_file 0 "EFI\\hyperiso\\hyperiso.img"
             fi
             elif [ -f (loop)/hyperbola/boot/x86_64/hyperiso.img ]; then
                 vt_add_replace_file 0 "EFI\\hyperiso\\hyperiso.img"
             fi

+        elif [ -d (loop)/EFI/BOOT/entries ]; then
+            vt_linux_get_main_initrd_index vtindex
+
+            if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then
+                vt_add_replace_file 0 "EFI\\parabolaiso\\parabolaiso.img"
+            elif [ -f (loop)/parabola/boot/x86_64/initramfs-linux-libre.img ]; then
+                vt_add_replace_file $vtindex "parabola\\boot\\x86_64\\initramfs-linux-libre.img"
+            fi

         elif [ -e (loop)/syslinux/alt0/full.cz ]; then
             vt_add_replace_file 0 "EFI\\BOOT\\full.cz"            
             set FirstTryBootFile='@EFI@BOOT@grubx64.efi'
         elif [ -e (loop)/syslinux/alt0/full.cz ]; then
             vt_add_replace_file 0 "EFI\\BOOT\\full.cz"            
             set FirstTryBootFile='@EFI@BOOT@grubx64.efi'

+            
+        elif vt_str_begin "$vt_volume_id" "SolusLive"; then
+            vt_add_replace_file 0 "initrd"
+

         fi
         
     fi
     
         fi
         
     fi
     

-    vt_linux_chain_data ${1}${chosen_path}
+    vt_linux_chain_data "${1}${chosen_path}"
+
+    if [ -n "$LoadIsoEfiDriver" -a $vt_chosen_size -LT 104857600 ]; then
+        if [ -f (loop)/efi/clover/cloverx64.efi ]; then
+            unset LoadIsoEfiDriver
+        fi
+    fi

 
     if [ -n "$vtoy_chain_mem_addr" ]; then
 
     if [ -n "$vtoy_chain_mem_addr" ]; then

-        ventoy_cli_console       
-        chainloader ${vtoy_path}/ventoy_x64.efi  env_param=${env_param} isoefi=${LoadIsoEfiDriver} FirstTry=${FirstTryBootFile} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
-        boot
+        ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
+        ventoy_cli_console     
+
+        unset vtGrub2Mode
+        if vt_check_mode 3 "$vt_chosen_name"; then
+            set vtGrub2Mode=1
+        elif vt_str_begin "$vt_volume_id" "HOLO_"; then
+            if [ -d (loop)/loader/entries ]; then
+                set vtGrub2Mode=1
+            fi
+        elif vt_str_begin "$vt_volume_id" "KRD"; then
+            if [ -f (loop)/boot/grub/grub.cfg.sig ]; then
+                set vtGrub2Mode=1
+            fi
+        fi
+
+        if [ -n "$vtGrub2Mode" ]; then
+            ventoy_debug_pause
+        else
+            if [ "$VTOY_EFI_ARCH" != "mips" ]; then
+                chainloader ${vtoy_path}/ventoy_${VTOY_EFI_ARCH}.efi fallback env_param=${env_param} isoefi=${LoadIsoEfiDriver} FirstTry=${FirstTryBootFile} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+                boot
+            fi
+        fi
+
+        # fallback
+        set vtback_root=$root        
+        vt_push_last_entry
+        set vtback_theme=$theme
+        unset theme
+        
+        vt_trailer_cpio "$vtoy_iso_part" "$vt_chosen_path" noinit
+        vt_set_boot_opt rdinit=/vtoy/vtoy
+
+        set root=(loop)
+        set vtback_cfg_find=0
+        for cfg in "/boot/grub/grub.cfg" "/EFI/BOOT/grub.cfg" "/EFI/debian/grub.cfg" "EFI/boot/grub.cfg" "efi/boot/grub.cfg" "/grub/grub.cfg" "EFI/BOOT/BOOTX64.conf"; do
+            if [ -e "$cfg" ]; then
+                set vtback_cfg_find=1
+                configfile "$cfg"
+                break
+            fi
+        done
+        if [ $vtback_cfg_find -eq 0 ]; then
+            if [ -f (loop)/loader/loader.conf -a -d (loop)/loader/entries ]; then
+                if vt_str_begin "$vt_volume_id" "HOLO_"; then
+                    set root=(loop,2)
+                    vt_systemd_menu (loop,2) vt_sys_menu_mem
+                else
+                    vt_systemd_menu (loop) vt_sys_menu_mem
+                fi
+                set vtback_cfg_find=1
+                configfile "mem:${vt_sys_menu_mem_addr}:size:${vt_sys_menu_mem_size}"
+            fi
+        fi
+        
+        if [ $vtback_cfg_find -eq 0 ]; then
+            if [ -f (loop)/boot/isolinux/syslnx64.cfg ]; then
+                syslinux_configfile (loop)/boot/isolinux/syslnx64.cfg
+                set vtback_cfg_find=1
+            elif [ -f (loop)/boot/syslinux/porteus.cfg ]; then
+                syslinux_configfile (loop)/boot/syslinux/porteus.cfg
+                set vtback_cfg_find=1
+            fi
+        fi
+
+        if [ "$vtback_cfg_find" = "0" ]; then
+            echo " "
+            echo "No bootfile found for UEFI!"
+            echo "Maybe the image does not support $VTOY_EFI_ARCH UEFI"
+            echo " "
+            sleep 30
+        fi
+
+        vt_unset_boot_opt
+        set root=$vtback_root        
+        set theme=$vtback_theme
+        vt_pop_last_entry
+        ventoy_gui_console

     else
         echo "chain empty failed"
         ventoy_pause
     else
         echo "chain empty failed"
         ventoy_pause


@@ -485,11 +886,12 @@ function uefi_linux_menu_func {
 }
 
 function uefi_unix_menu_func {
 }
 
 function uefi_unix_menu_func {

-    ventoy_unix_comm_proc $1 ${chosen_path}
+    ventoy_unix_comm_proc $1 "${chosen_path}"

     
     if [ -n "$vtoy_chain_mem_addr" ]; then
     
     if [ -n "$vtoy_chain_mem_addr" ]; then

+        ventoy_acpi_param ${vtoy_chain_mem_addr} 2048

         ventoy_cli_console
         ventoy_cli_console

-        chainloader ${vtoy_path}/ventoy_x64.efi  env_param=${env_param} isoefi=${LoadIsoEfiDriver} FirstTry=${FirstTryBootFile} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+        chainloader ${vtoy_path}/ventoy_${VTOY_EFI_ARCH}.efi  env_param=${env_param} isoefi=${LoadIsoEfiDriver} FirstTry=${FirstTryBootFile} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}

         boot
     else
         echo "chain empty failed"
         boot
     else
         echo "chain empty failed"


@@ -497,34 +899,37 @@ function uefi_unix_menu_func {
     fi
 }
 
     fi
 }
 

-function uefi_iso_menu_func {
-
-    if [ -d (loop)/ ]; then
-        loopback -d loop
+function ventoy_reset_nojoliet {
+    if vt_str_begin "$vt_volume_id" "ARCARESCUE"; then
+        vt_iso9660_nojoliet 1
+    else
+        vt_iso9660_nojoliet 0

     fi
     fi

+    
+    vt_append_extra_sector 0
+}

 
 

+function uefi_iso_menu_func {

     if [ -n "$vtisouefi" ]; then
         set LoadIsoEfiDriver=on
         unset vtisouefi
     if [ -n "$vtisouefi" ]; then
         set LoadIsoEfiDriver=on
         unset vtisouefi

-    elif vt_check_mode 2; then
+    elif vt_check_mode 2 "$vt_chosen_name"; then

         set LoadIsoEfiDriver=on
     else
         unset LoadIsoEfiDriver
     fi
 
         set LoadIsoEfiDriver=on
     else
         unset LoadIsoEfiDriver
     fi
 

-    set chosen_path=$2
-    vt_select_auto_install ${chosen_path}
-    vt_select_persistence ${chosen_path}
+    set chosen_path="$2"
+    vt_select_auto_install "${chosen_path}"
+    vt_select_persistence "${chosen_path}"

 
 

-    if vt_is_udf ${1}${chosen_path}; then
-        set ventoy_fs_probe=udf
-    else
-        set ventoy_fs_probe=iso9660
-        vt_iso9660_nojoliet 0
+    if ! vt_is_udf "${1}${chosen_path}"; then
+        # Lenovo EasyStartup need an addional sector for boundary check
+        if vt_str_begin "$vt_volume_id" "EasyStartup"; then
+            vt_skip_svd "${vtoy_iso_part}${vt_chosen_path}"
+            vt_append_extra_sector 1
+        fi

     fi
     fi

-
-    loopback loop ${1}${chosen_path}    
-    get_os_type (loop)

     
     if [ -d (loop)/EFI ]; then
         set vt_efi_dir=YES
     
     if [ -d (loop)/EFI ]; then
         set vt_efi_dir=YES


@@ -537,104 +942,302 @@ function uefi_iso_menu_func {
     if [ -n "$vtcompat" ]; then
         set ventoy_compatible=YES
         unset vtcompat
     if [ -n "$vtcompat" ]; then
         set ventoy_compatible=YES
         unset vtcompat

-    elif vt_check_mode 1; then
+    elif vt_check_mode 1 "$vt_chosen_name"; then

         set ventoy_compatible=YES
     else
         set ventoy_compatible=YES
     else

-        vt_check_compatible (loop)
+        vt_check_compatible (loop)        

     fi
     
     fi
     

-    vt_img_sector ${1}${chosen_path}
+    vt_img_sector "${1}${chosen_path}"
+    
+    if [ "$ventoy_fs_probe" = "iso9660" ]; then
+        vt_select_conf_replace "${1}" "${chosen_path}"
+    fi

     
     if [ "$vtoy_os" = "Windows" ]; then
         vt_check_compatible_pe (loop)        
     
     if [ "$vtoy_os" = "Windows" ]; then
         vt_check_compatible_pe (loop)        

-        uefi_windows_menu_func  $1 ${chosen_path}
+        uefi_windows_menu_func  "$1" "${chosen_path}"

     elif [ "$vtoy_os" = "Unix" ]; then
     elif [ "$vtoy_os" = "Unix" ]; then

-        uefi_unix_menu_func $1 ${chosen_path}
+        uefi_unix_menu_func "$1" "${chosen_path}"

     else
     else

-        uefi_linux_menu_func  $1 ${chosen_path}
+        vt_check_compatible_linux (loop)
+        uefi_linux_menu_func  "$1" "${chosen_path}"

     fi
 
     fi
 

-    ventoy_gui_console
+    ventoy_gui_console    

 }
 
 function uefi_iso_memdisk {    
     echo 'Loading ISO file to memory ...'
 }
 
 function uefi_iso_memdisk {    
     echo 'Loading ISO file to memory ...'

-    vt_load_img_memdisk ${1}${2} vtoy_iso_buf
+    vt_load_img_memdisk "${1}${2}" vtoy_iso_buf

     
     ventoy_cli_console
     
     ventoy_cli_console

-    chainloader ${vtoy_path}/ventoy_x64.efi memdisk env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_iso_buf_addr}:size:${vtoy_iso_buf_size}
+    chainloader ${vtoy_path}/ventoy_${VTOY_EFI_ARCH}.efi memdisk env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_iso_buf_addr}:size:${vtoy_iso_buf_size}

     boot
     
     ventoy_gui_console
 }
 
     boot
     
     ventoy_gui_console
 }
 

-
-function legacy_windows_menu_func {
-    vt_windows_reset
-    
-    if [ "$ventoy_compatible" = "NO" ]; then   
-        
-        if [ "$ventoy_fs_probe" = "iso9660" ]; then
-            loopback -d loop
-            vt_iso9660_nojoliet 1
-            loopback loop $1$2
+function vtoy_windows_wimboot {
+    if [ -f (loop)/x86/sources/boot.wim -a -f (loop)/x64/sources/boot.wim ]; then
+        vt_sel_wimboot vtoy_wimboot_bit
+        if [ "$vtoy_wimboot_bit" = "32" ]; then
+            set vtoy_wimboot_prefix=(loop)/x86
+        else
+            set vtoy_wimboot_prefix=(loop)/x64

         fi
         fi

-        
-        for file in "boot/bcd" "/efi/microsoft/boot/bcd" "SSTR/BCD"; do
-            vt_windows_collect_wim_patch bcd (loop)/$file                
-        done
-        
-        distro_specify_wim_patch
-
-        vt_windows_count_wim_patch vt_wim_cnt
-        if [ $vt_wim_cnt -eq 0 ]; then
-            distro_specify_wim_patch_phase2
+    else
+        set vtoy_wimboot_prefix=(loop)
+        if vt_is_pe64 $vtoy_wimboot_prefix/setup.exe; then
+            set vtoy_wimboot_bit=64
+        else
+            set vtoy_wimboot_bit=32

         fi
         fi

-        
-        ventoy_debug_pause        
-        locate_wim

     fi
 
     fi
 

-    vt_windows_chain_data ${1}${chosen_path}    
-    ventoy_debug_pause    
+    if [ -n "${vtdebug_flag}" ]; then
+        echo vtoy_wimboot_prefix=$vtoy_wimboot_prefix vtoy_wimboot_bit=$vtoy_wimboot_bit vt_wimkernel=$vt_wimkernel
+    fi
+
+    vt_windows_wimboot_data "$vtoy_wimboot_prefix/sources/boot.wim" vtoy_init_exe vtoy_wim_bit

     
     

-    if [ -n "$vtoy_chain_mem_addr" ]; then
-        linux16   $vtoy_path/ipxe.krn ${vtdebug_flag} ibft mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+    if [ "$grub_platform" = "pc" ]; then
+        linux16  "$vtoy_path/$vt_wimkernel"  quiet
+        ventoy_debug_pause
+
+        vt_set_wim_load_prompt 1 "Loading files......"
+        initrd16 newc:winpeshl.exe:mem:${vtoy_wimboot_mem_addr}:size:${vtoy_wimboot_mem_size} \
+             newc:vtoy_wimboot:$vtoy_wimboot_prefix/boot/bcd \
+             newc:bcd:$vtoy_wimboot_prefix/boot/bcd \
+             newc:boot.sdi:$vtoy_wimboot_prefix/boot/boot.sdi \
+             newc:boot.wim:$vtoy_wimboot_prefix/sources/boot.wim
+        vt_set_wim_load_prompt 0

         boot
     else
         boot
     else

-        echo "chain empty failed"
-        ventoy_pause
+        vt_set_wim_load_prompt 1 "Loading files......"
+        vt_load_file_to_mem "nodecompress" $vtoy_wimboot_prefix/sources/boot.wim vtoy_wimfile_mem
+        vt_set_wim_load_prompt 0
+
+        if [ $? -eq 0 ]; then
+            set vtoy_wimfile_path=mem:${vtoy_wimfile_mem_addr}:size:${vtoy_wimfile_mem_size}
+        else
+            set vtoy_wimfile_path=$vtoy_wimboot_prefix/sources/boot.wim
+        fi
+
+        ventoy_cli_console
+        chainloader "$vtoy_path/$vt_wimkernel" quiet \
+            "vf=winpeshl.exe:mem:${vtoy_wimboot_mem_addr}:size:${vtoy_wimboot_mem_size}" \
+            "vf=vtoy_wimboot:$vtoy_wimboot_prefix/boot/bcd" \
+            "vf=bcd:$vtoy_wimboot_prefix/boot/bcd" \
+            "vf=boot.sdi:$vtoy_wimboot_prefix/boot/boot.sdi" \
+            "vf=boot.wim:$vtoy_wimfile_path" \
+            pfsize=$vtoy_chain_file_size  \
+            pfread=$vtoy_chain_file_read
+        boot
+        ventoy_gui_console

     fi
 }
 
     fi
 }
 

-function legacy_linux_menu_func {
-    if [ "$ventoy_compatible" = "NO" ]; then
+function vtoy_winpe_wimboot {
+    unset vtoy_boot_sdi_legacy
+    unset vtoy_boot_sdi_efi
+    
+    set vtoy_wimboot_prefix=(loop)    
+    set vtoy_wim_path="$1"
+    
+    if [ -n "${vtdebug_flag}" ]; then
+        echo "winpe_wimboot $1 $2 $3"
+    fi
+    
+    if [ "$2" != "0" ]; then
+        set vtoy_boot_sdi_legacy="newc:boot.sdi:$vtoy_wimboot_prefix/$2"
+        set vtoy_boot_sdi_efi="vf=boot.sdi:$vtoy_wimboot_prefix/$2"
+    fi

 
 

-        if [ "$ventoy_fs_probe" = "udf" ]; then
-            loopback -d loop
-            set ventoy_fs_probe=iso9660
-            loopback loop $1$2
-        fi
+    vt_windows_wimboot_data $vtoy_wimboot_prefix/$vtoy_wim_path vtoy_init_exe vtoy_wim_bit

     
     

-        vt_load_cpio  $vtoy_path/ventoy.cpio  $2 $1 "busybox=$ventoy_busybox_ver"
+    if [ "$grub_platform" = "pc" ]; then
+        linux16  "$vtoy_path/$vt_wimkernel" quiet
+        ventoy_debug_pause

 
 

-        vt_linux_clear_initrd
-        
-        if [ -d (loop)/pmagic ]; then
-            vt_linux_specify_initrd_file /pmagic/initrd.img
+        vt_set_wim_load_prompt 1 "Loading files......"         
+        initrd16 newc:$vtoy_init_exe:mem:${vtoy_wimboot_mem_addr}:size:${vtoy_wimboot_mem_size} \
+             newc:vtoy_wimboot:$vtoy_path/$vt_wimkernel \
+             newc:bootmgr.exe:mem:${vtoy_pe_bootmgr_mem_addr}:size:${vtoy_pe_bootmgr_mem_size} \
+             newc:bcd:mem:${vtoy_pe_bcd_mem_addr}:size:${vtoy_pe_bcd_mem_size} \
+             $vtoy_boot_sdi_legacy \
+             newc:boot.wim:$vtoy_wimboot_prefix/$vtoy_wim_path
+        vt_set_wim_load_prompt 0        
+        boot
+    else
+        if [ "$VTOY_EFI_ARCH" = "x64" -a "$vtoy_wim_bit" = "32" ]; then
+            echo -e "\nThis is 32bit Windows and does NOT support x86_64 UEFI firmware.\n"
+            echo -e "这是32位的 Windows 系统，不支持当前的64位 UEFI 环境。\n"
+        fi
+
+        vt_set_wim_load_prompt 1 "Loading files......"
+        vt_load_file_to_mem "nodecompress" $vtoy_wimboot_prefix/$vtoy_wim_path vtoy_wimfile_mem
+        vt_set_wim_load_prompt 0
+
+        if [ $? -eq 0 ]; then
+            set vtoy_wimfile_path=mem:${vtoy_wimfile_mem_addr}:size:${vtoy_wimfile_mem_size}

         else
         else

-            for dir in "isolinux" "boot/isolinux" "boot/x86_64/loader" "syslinux" "boot/syslinux"; do
-                if [ -d (loop)/$dir ]; then
-                    vt_linux_parse_initrd_isolinux   (loop)/$dir/
-                fi
-            done
+            set vtoy_wimfile_path=$vtoy_wimboot_prefix/$vtoy_wim_path

         fi
         
         fi
         

-        # special process for special distros
-        #archlinux
-        if [ -d (loop)/arch/boot/syslinux ]; then
+        unset vtoy_boot_efi_path
+        if [ -F (loop)/efi/boot/boot${VTOY_EFI_ARCH}.efi ]; then
+            set vtoy_boot_efi_path="vf=bootx64.efi:(loop)/efi/boot/boot${VTOY_EFI_ARCH}.efi"
+        fi
+
+        ventoy_cli_console
+        chainloader "$vtoy_path/$vt_wimkernel" quiet \
+            "vf=$vtoy_init_exe:mem:${vtoy_wimboot_mem_addr}:size:${vtoy_wimboot_mem_size}" \
+            "vf=vtoy_wimboot:$vtoy_path/$vt_wimkernel" \
+            "vf=bcd:mem:${vtoy_pe_bcd_mem_addr}:size:${vtoy_pe_bcd_mem_size}" \
+            "$vtoy_boot_sdi_efi" \
+            "$vtoy_boot_efi_path" \
+            "vf=boot.wim:$vtoy_wimfile_path" \
+            pfsize=$vtoy_chain_file_size  \
+            pfread=$vtoy_chain_file_read
+        boot
+        ventoy_gui_console
+    fi
+}
+
+function vtoy_wimboot_func {
+    if [ "$grub_platform" = "pc" ]; then
+        set vt_wimkernel=wimboot.x86_64.xz        
+    else
+        if [ "$grub_cpu" = "i386" ]; then
+            set vt_wimkernel=wimboot.i386.efi.xz
+        else
+            set vt_wimkernel=wimboot.x86_64.xz
+        fi
+    fi
+
+    if vt_is_standard_winiso (loop); then
+        echo -e "\n==================== VENTOY WIMBOOT ==================\n"
+        vtoy_windows_wimboot
+    else
+        vt_sel_winpe_wim (loop)
+        if [ -n "$vtoy_pe_wim_path" ]; then            
+            echo -e "\n==================== VENTOY WIMBOOT ==================\n"
+            
+            vt_fs_ignore_case 1
+            vt_load_file_to_mem "auto" $vtoy_path/common_bcd.xz vtoy_pe_bcd_mem
+            
+            set vt_sdi_path=0
+            for vsdi in "boot/boot.sdi" "2K10/FONTS/boot.sdi" "SSTR/boot.sdi" "ISPE/BOOT.SDI" \
+            "boot/uqi.sdi" "ISYL/boot.sdi" "WEPE/WEPE.SDI" ; do
+                if [ -F "(loop)/$vsdi" ]; then
+                    set vt_sdi_path=$vsdi
+                    break
+                fi
+            done
+            
+            if [ "$grub_platform" = "pc" ]; then
+                vt_load_file_to_mem "auto" $vtoy_path/common_bootmgr.xz vtoy_pe_bootmgr_mem
+                vtoy_winpe_wimboot "$vtoy_pe_wim_path" "$vt_sdi_path" 1
+            else
+                vtoy_winpe_wimboot "$vtoy_pe_wim_path" "$vt_sdi_path" 0
+            fi
+            
+            vt_fs_ignore_case 0
+        fi
+    fi
+}
+
+function legacy_windows_menu_func {
+    vt_windows_reset
+    
+    unset vt_cur_wimboot_mode
+    if vt_check_mode 4 "$vt_chosen_name"; then
+        set vt_cur_wimboot_mode=1
+    fi
+    
+    if [ "$ventoy_compatible" = "NO" -o "$vt_cur_wimboot_mode" = "1" ]; then
+        if [ "$ventoy_fs_probe" = "iso9660" ]; then
+            loopback -d loop
+            vt_iso9660_nojoliet 1
+            loopback loop "$1$2"
+        fi
+        
+        for file in "boot/bcd" "/efi/microsoft/boot/bcd" "SSTR/BCD" "boot/bce"; do
+            vt_windows_collect_wim_patch bcd (loop)/$file                
+        done
+        
+        distro_specify_wim_patch
+
+        vt_windows_count_wim_patch vt_wim_cnt
+        if [ $vt_wim_cnt -eq 0 ]; then
+            distro_specify_wim_patch_phase2
+        fi
+        
+        ventoy_debug_pause
+        if [ -z "$vt_cur_wimboot_mode" ]; then
+            locate_wim "${chosen_path}"
+        fi
+    fi
+    
+    vt_windows_chain_data "${1}${chosen_path}"
+    ventoy_debug_pause
+    
+    if [ "$vt_cur_wimboot_mode" = "1" ]; then
+        vtoy_wimboot_func
+    fi
+
+    if [ -n "$vtoy_chain_mem_addr" ]; then
+        ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
+        if [ "$ventoy_compatible" = "NO" ]; then
+            linux16   $vtoy_path/ipxe.krn ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+        else
+            linux16   $vtoy_path/ipxe.krn ${vtdebug_flag} ibft mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+        fi
+        boot
+    else
+        echo "chain empty failed"
+        ventoy_pause
+    fi
+}
+
+function legacy_linux_menu_func {
+    if [ "$ventoy_compatible" = "NO" ]; then
+
+        if [ "$ventoy_fs_probe" = "udf" ]; then
+            loopback -d loop
+            set ventoy_fs_probe=iso9660
+            loopback loop "$1$2"
+        fi
+
+        
+        if vt_syslinux_need_nojoliet "$1$2"; then
+            vt_iso9660_nojoliet 1
+            loopback -d loop
+            loopback loop "$1$2"
+        fi
+
+        vt_load_cpio  $vtoy_path  "$2" "$1" "busybox=$ventoy_busybox_ver"
+
+        vt_linux_clear_initrd
+        
+        if [ -d (loop)/pmagic ]; then
+            vt_linux_specify_initrd_file /pmagic/initrd.img
+        else
+            for dir in "isolinux" "boot/isolinux" "boot/x86_64/loader" "syslinux" "boot/syslinux"; do
+                if [ -d (loop)/$dir ]; then
+                    vt_linux_parse_initrd_isolinux   (loop)/$dir/
+                fi
+            done
+        fi
+        
+        # special process for special distros
+        #archlinux
+        if [ -d (loop)/arch/boot/syslinux ]; then

             vt_linux_parse_initrd_isolinux   (loop)/arch/boot/syslinux/  /arch/
             vt_linux_parse_initrd_isolinux   (loop)/arch/boot/syslinux/  /arch/boot/syslinux/
             vt_linux_parse_initrd_isolinux   (loop)/arch/boot/syslinux/  /arch/
             vt_linux_parse_initrd_isolinux   (loop)/arch/boot/syslinux/  /arch/boot/syslinux/

+        elif [ -d (loop)/anarchy/boot/syslinux ]; then
+            vt_linux_parse_initrd_isolinux   (loop)/anarchy/boot/syslinux/  /anarchy/

             
         #manjaro
         elif [ -d (loop)/manjaro ]; then
             
         #manjaro
         elif [ -d (loop)/manjaro ]; then


@@ -649,18 +1252,84 @@ function legacy_linux_menu_func {
         
         vt_linux_initrd_count vtcount
         if [ $vtcount -eq 0 ]; then
         
         vt_linux_initrd_count vtcount
         if [ $vtcount -eq 0 ]; then

+            if [ -d (loop)/rancheros ]; then
+                vt_linux_parse_initrd_isolinux   (loop)/boot/  /boot/isolinux/
+            fi
+

             distro_specify_initrd_file_phase2
         fi
         
         locate_initrd
     fi
     
             distro_specify_initrd_file_phase2
         fi
         
         locate_initrd
     fi
     

-    vt_linux_chain_data ${1}${chosen_path}    
+    vt_linux_chain_data "${1}${chosen_path}"

     ventoy_debug_pause
     
     if [ -n "$vtoy_chain_mem_addr" ]; then
     ventoy_debug_pause
     
     if [ -n "$vtoy_chain_mem_addr" ]; then

-        linux16   $vtoy_path/ipxe.krn ${vtdebug_flag}  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
-        boot
+        unset vtGrub2Mode
+        if vt_check_mode 3 "$vt_chosen_name"; then
+            set vtGrub2Mode=1
+        elif vt_str_begin "$vt_volume_id" "HOLO_"; then
+            if [ -d (loop)/loader/entries ]; then
+                set vtGrub2Mode=1
+            fi        
+        fi
+    
+        if [ -n "$vtGrub2Mode" ]; then
+            ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
+            ventoy_cli_console
+
+            # fallback
+            set vtback_root=$root        
+            vt_push_last_entry
+            set vtback_theme=$theme
+            unset theme
+            
+            vt_trailer_cpio "$vtoy_iso_part" "$vt_chosen_path" noinit
+            vt_set_boot_opt rdinit=/vtoy/vtoy
+
+            set root=(loop)
+            set vtback_cfg_find=0
+            for cfg in "/boot/grub/grub.cfg" "/EFI/BOOT/grub.cfg" "/EFI/debian/grub.cfg" "EFI/boot/grub.cfg" "efi/boot/grub.cfg" "/grub/grub.cfg" "EFI/BOOT/BOOTX64.conf"; do
+                if [ -e "$cfg" ]; then
+                    set vtback_cfg_find=1
+                    configfile "$cfg"
+                    break
+                fi
+            done
+            if [ $vtback_cfg_find -eq 0 ]; then
+                if [ -f (loop)/loader/loader.conf -a -d (loop)/loader/entries ]; then                    
+                    if vt_str_begin "$vt_volume_id" "HOLO_"; then
+                        set root=(loop,2)
+                        vt_systemd_menu (loop,2) vt_sys_menu_mem
+                    else
+                        vt_systemd_menu (loop) vt_sys_menu_mem
+                    fi
+                    set vtback_cfg_find=1  
+                    configfile "mem:${vt_sys_menu_mem_addr}:size:${vt_sys_menu_mem_size}"
+                fi
+            fi
+            
+            if [ $vtback_cfg_find -eq 0 ]; then
+                if [ -f (loop)/boot/isolinux/syslnx64.cfg ]; then
+                    syslinux_configfile (loop)/boot/isolinux/syslnx64.cfg
+                    set vtback_cfg_find=1
+                elif [ -f (loop)/boot/syslinux/porteus.cfg ]; then
+                    syslinux_configfile (loop)/boot/syslinux/porteus.cfg
+                    set vtback_cfg_find=1
+                fi
+            fi
+
+            vt_unset_boot_opt
+            set root=$vtback_root        
+            set theme=$vtback_theme
+            vt_pop_last_entry
+            ventoy_gui_console
+        else
+            ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
+            linux16   $vtoy_path/ipxe.krn ${vtdebug_flag}  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}            
+            boot
+        fi

     else
         echo "chain empty failed"
         ventoy_pause
     else
         echo "chain empty failed"
         ventoy_pause


@@ -669,9 +1338,10 @@ function legacy_linux_menu_func {
 
 
 function legacy_unix_menu_func {    
 
 
 function legacy_unix_menu_func {    

-    ventoy_unix_comm_proc $1 ${chosen_path}
+    ventoy_unix_comm_proc $1 "${chosen_path}"

     
     if [ -n "$vtoy_chain_mem_addr" ]; then
     
     if [ -n "$vtoy_chain_mem_addr" ]; then

+        #ventoy_acpi_param ${vtoy_chain_mem_addr} 2048

         linux16   $vtoy_path/ipxe.krn ${vtdebug_flag}  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
         boot
     else
         linux16   $vtoy_path/ipxe.krn ${vtdebug_flag}  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
         boot
     else


@@ -682,273 +1352,1033 @@ function legacy_unix_menu_func {
 
 
 function legacy_iso_menu_func {
 
 
 function legacy_iso_menu_func {

+    set chosen_path="$2"
+    
+    vt_select_auto_install "${chosen_path}"
+    vt_select_persistence "${chosen_path}"
+    
+    if [ -n "$vtcompat" ]; then
+        set ventoy_compatible=YES
+        unset vtcompat
+    elif vt_check_mode 1 "$vt_chosen_name"; then
+        set ventoy_compatible=YES
+    else
+        vt_check_compatible (loop)
+    fi
+    
+    vt_img_sector "${1}${chosen_path}"
+
+    if [ "$ventoy_fs_probe" = "iso9660" ]; then
+        vt_select_conf_replace "${1}" "${chosen_path}"
+    fi
+
+    if [ "$vtoy_os" = "Windows" ]; then
+        vt_check_compatible_pe (loop)        
+        legacy_windows_menu_func  "$1" "${chosen_path}"
+    elif [ "$vtoy_os" = "Unix" ]; then
+        legacy_unix_menu_func "$1" "${chosen_path}"
+    else
+        vt_check_compatible_linux (loop)
+        legacy_linux_menu_func  "$1" "${chosen_path}"
+    fi
+    vt_secondary_recover_mode
+}
+
+function legacy_iso_memdisk {

 
 

+    linux16   $vtoy_path/memdisk iso raw    
+    echo "Loading ISO file to memory ..."
+    initrd16  "${1}${2}"
+    boot
+}
+
+
+function iso_endless_os_proc {

     if [ -d (loop)/ ]; then
         loopback -d loop
     fi
 
     if [ -d (loop)/ ]; then
         loopback -d loop
     fi
 

-    set chosen_path=$2
-    vt_select_auto_install ${chosen_path}
-    vt_select_persistence ${chosen_path}
+    loopback loop "${1}${2}"
+    vt_img_sector "${1}${2}"
+
+    vt_load_cpio  $vtoy_path  "$2" "$1"  "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio "$1" "$2" noinit
+    
+    ventoy_debug_pause
+
+    vt_set_boot_opt '@kparams' rdinit=/vtoy/vtoy 

 
 

-    if vt_is_udf ${1}${chosen_path}; then
+    set eosimage=loop
+    set ventoy_bls_bootdev=/boot    
+    set ventoy_loading_tip="Loading files ......"
+    
+    export eosimage    
+    configfile (loop)/endless/grub/grub.cfg
+    
+    unset eosimage
+    unset ventoy_bls_bootdev
+    unset ventoy_loading_tip
+    
+    vt_unset_boot_opt
+}
+
+
+function ventoy_iso_busybox_ver {
+
+    if [ "$VTOY_EFI_ARCH" = "aa64" ]; then
+        set ventoy_busybox_ver=a64
+    elif [ "$VTOY_EFI_ARCH" = "mips" ]; then
+        set ventoy_busybox_ver=m64
+    else
+        set ventoy_busybox_ver=32
+    
+        #special process for deepin-live iso
+        if [ "$vt_chosen_size" = "403701760" ]; then
+            if vt_str_str "$vt_chosen_path" "/deepin-live"; then
+                set ventoy_busybox_ver=64
+            fi
+        elif vt_str_begin "$vt_volume_id" "PHOTON_"; then
+            set ventoy_busybox_ver=64
+        elif vt_str_begin "$vt_volume_id" "smgl-test-quinq-x86_64"; then
+            set ventoy_busybox_ver=64
+        elif vt_str_begin "$vt_volume_id" "LDiagBootable"; then
+            set ventoy_busybox_ver=64
+
+        fi
+    fi
+}
+
+
+function iso_common_menuentry {
+    unset vt_system_id
+    unset vt_volume_id
+    
+    vt_chosen_img_path vt_chosen_path vt_chosen_size vt_chosen_name
+
+    vt_parse_iso_volume "${vtoy_iso_part}${vt_chosen_path}" vt_system_id vt_volume_id vt_volume_space
+    if [ $vt_volume_space -NE $vt_chosen_size ]; then        
+        vt_mod $vt_chosen_size 2048 vt_chosen_size_mod
+        if [ $vt_chosen_size_mod -ne 0 ]; then
+            echo -e "\n $vt_volume_space $vt_chosen_size $vt_chosen_size_mod\n"
+            echo -e "\n The size of the iso file \"$vt_chosen_size\" is invalid. File corrupted ?\n"
+            echo -e " 此ISO文件的大小 \"$vt_chosen_size\" 有问题，请确认文件是否损坏。\n"
+            echo -en "\n$VTLANG_ENTER_CONTINUE ..."
+            read vtInputKey
+        fi
+    fi
+    
+    if vt_check_password "${vt_chosen_path}"; then
+        return
+    fi
+
+    if ventoy_vcfg_proc "${vt_chosen_path}"; then        
+        return
+    fi
+    
+    
+    
+    #secondary boot menu
+    if vt_is_udf "${vtoy_iso_part}${vt_chosen_path}"; then

         set ventoy_fs_probe=udf
     else
         set ventoy_fs_probe=iso9660
         set ventoy_fs_probe=udf
     else
         set ventoy_fs_probe=iso9660

-        vt_iso9660_nojoliet 0
+        ventoy_reset_nojoliet

     fi
     
     fi
     

-    loopback loop ${1}${chosen_path}
+    if [ -d (loop)/ ]; then
+        loopback -d loop
+    fi
+    loopback loop "${vtoy_iso_part}${vt_chosen_path}" 

     
     get_os_type (loop)
     
     get_os_type (loop)

+    
+    ventoy_debug_pause
+    
+    if vt_need_secondary_menu "$vt_chosen_name"; then
+        vt_show_secondary_menu "$vt_chosen_path" "$vtoy_os" $vt_chosen_size
+        if [ "$VTOY_SECOND_EXIT" = "1" ]; then
+            return
+        fi
+    fi

 
 

-    if [ -n "$vtcompat" ]; then
-        set ventoy_compatible=YES
-        unset vtcompat
-    elif vt_check_mode 1; then
-        set ventoy_compatible=YES
+
+    if vt_str_begin "$vt_volume_id" "Avira"; then 
+        vt_skip_svd "${vtoy_iso_part}${vt_chosen_path}"
+    fi
+    
+    ventoy_iso_busybox_ver
+    
+    #special process for Endless OS
+    if vt_str_begin "$vt_volume_id" "Endless-OS"; then
+        iso_endless_os_proc $vtoy_iso_part "$vt_chosen_path"
+    elif vt_str_begin "$vt_volume_id" "TENS-Public"; then
+        set vtcompat=1
+    fi
+
+
+    # auto memdisk mode for some special ISO files
+    vt_iso_vd_id_parse "${vtoy_iso_part}${vt_chosen_path}"    
+    unset vtMemDiskBoot
+    if vt_check_mode 0 "$vt_chosen_name"; then
+        set vtMemDiskBoot=1

     else
     else

-        vt_check_compatible (loop)
+        if [ "$grub_platform" = "pc" ]; then
+            if vt_iso_vd_id_begin 1 0 "Memtest86+"; then
+                set vtMemDiskBoot=1
+            elif vt_iso_vd_id_begin 0 1 "KolibriOS"; then
+                set vtMemDiskBoot=1
+            fi
+        fi
+        
+        #For iKuai8 (<64MB)
+        if [ $vt_chosen_size -LE 67108864 ]; then
+            if vt_str_begin "$vt_chosen_name" "iKuai"; then
+                set vtMemDiskBoot=1
+            fi
+        fi
+    fi
+    vt_iso_vd_id_clear
+
+
+    if [ "$grub_platform" = "pc" ]; then
+        if [ -n "$vtMemDiskBoot" ]; then
+            legacy_iso_memdisk $vtoy_iso_part "$vt_chosen_path"
+        else
+            legacy_iso_menu_func $vtoy_iso_part "$vt_chosen_path"
+        fi
+    else
+        if [ -n "$vtMemDiskBoot" ]; then
+            uefi_iso_memdisk $vtoy_iso_part  "$vt_chosen_path"
+        else
+            uefi_iso_menu_func $vtoy_iso_part  "$vt_chosen_path"
+        fi
+    fi
+
+    vt_secondary_recover_mode
+}
+
+function miso_common_menuentry {
+    vt_chosen_img_path vt_chosen_path vt_chosen_size vt_chosen_name
+
+    if vt_check_password "${vt_chosen_path}"; then
+        return
+    fi
+
+    echo "memdisk mode boot for $vt_chosen_path"
+    echo ""
+    ventoy_debug_pause
+
+    if [ "$grub_platform" = "pc" ]; then
+        legacy_iso_memdisk $vtoy_iso_part "$vt_chosen_path"
+    else
+        uefi_iso_memdisk $vtoy_iso_part  "$vt_chosen_path"
+    fi      
+}
+
+
+function common_unsupport_menuentry {
+    echo -e "\n The name of the iso file could NOT contain space or non-ascii characters. \n"
+    echo -e " 文件名中不能有中文或空格 \n"    
+    echo -en "\n$VTLANG_ENTER_EXIT ..."  
+    read vtInputKey
+}
+
+function miso_unsupport_menuentry {
+    common_unsupport_menuentry
+}
+
+function iso_unsupport_menuentry {
+    common_unsupport_menuentry
+}
+
+function wim_common_menuentry {
+    vt_chosen_img_path vt_chosen_path vt_chosen_size vt_chosen_name
+    
+    if vt_check_password "${vt_chosen_path}"; then
+        return
+    fi
+    
+    if ventoy_vcfg_proc "${vt_chosen_path}"; then        
+        return

     fi
     
     fi
     

-    vt_img_sector ${1}${chosen_path}
+    if vt_wim_check_bootable "${vtoy_iso_part}${vt_chosen_path}"; then
+        vt_wim_chain_data "${vtoy_iso_part}${vt_chosen_path}"
+    else
+        echo -e "\n This is NOT a bootable WIM file. \n"
+        echo -e " 这不是一个可启动的 WIM 文件。\n"
+    fi
+    
+    ventoy_debug_pause    
+    
+    if [ -n "$vtoy_chain_mem_addr" ]; then
+        if [ "$grub_platform" = "pc" ]; then
+            linux16   $vtoy_path/ipxe.krn ${vtdebug_flag}  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}            
+        else
+            ventoy_cli_console
+            chainloader ${vtoy_path}/ventoy_${VTOY_EFI_ARCH}.efi  env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+            ventoy_gui_console
+        fi
+        boot
+    else
+        echo "chain empty failed"
+        ventoy_pause
+    fi
+}

 
 

-    if [ "$vtoy_os" = "Windows" ]; then
-        vt_check_compatible_pe (loop)        
-        legacy_windows_menu_func  $1 ${chosen_path}
-    elif [ "$vtoy_os" = "Unix" ]; then
-        legacy_unix_menu_func $1 ${chosen_path}
+function wim_unsupport_menuentry {
+    common_unsupport_menuentry
+}
+
+function efi_common_menuentry {
+    vt_chosen_img_path vt_chosen_path vt_chosen_size vt_chosen_name
+    
+    if vt_check_password "${vt_chosen_path}"; then
+        return
+    fi
+    
+    if ventoy_vcfg_proc "${vt_chosen_path}"; then        
+        return
+    fi
+    
+    unset vt_vlnk_dst
+    if vt_is_vlnk_name "${vt_chosen_path}"; then
+        vt_get_vlnk_dst "${vtoy_iso_part}${vt_chosen_path}" vt_vlnk_dst
+        if [ -z "$vt_vlnk_dst" ]; then
+            echo -e "\n### VLNK FILE NOT FOUND ###\n### VLNK 文件不存在 ###\n"            
+            ventoy_pause
+            return
+        fi
+    else
+        vt_vlnk_dst="${vtoy_iso_part}${vt_chosen_path}"
+    fi
+    
+    ventoy_debug_pause
+
+    ventoy_cli_console
+    
+    #first try with chainload
+    set vtOldRoot=$root
+    set root=$vtoy_iso_part
+    chainloader "${vt_vlnk_dst}"
+    boot
+
+    #retry with isoboot
+    set root=$vtOldRoot
+    vt_concat_efi_iso "${vt_vlnk_dst}" vtoy_iso_buf    
+    chainloader ${vtoy_path}/ventoy_${VTOY_EFI_ARCH}.efi memdisk env_param=${env_param} dotefi isoefi=on ${vtdebug_flag} mem:${vtoy_iso_buf_addr}:size:${vtoy_iso_buf_size}
+    boot    
+
+    ventoy_gui_console
+}
+
+function efi_unsupport_menuentry {
+    common_unsupport_menuentry
+}
+
+function vhdboot_common_func {
+    vt_patch_vhdboot "$1"
+    
+    ventoy_debug_pause    
+    
+    if [ -n "$vtoy_vhd_buf_addr" ]; then
+        if [ "$grub_platform" = "pc" ]; then
+            ventoy_cli_console
+            linux16   $vtoy_path/memdisk iso raw    
+            initrd16  mem:${vtoy_vhd_buf_addr}:size:${vtoy_vhd_buf_size}            
+            boot
+            ventoy_gui_console
+        else
+            ventoy_cli_console
+            chainloader ${vtoy_path}/ventoy_${VTOY_EFI_ARCH}.efi memdisk env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_vhd_buf_addr}:size:${vtoy_vhd_buf_size}
+            boot
+            ventoy_gui_console
+        fi
+    else
+        echo "Please put the right ventoy_vhdboot.img file to the 1st partition"
+        ventoy_pause
+    fi
+}
+
+function vhd_common_menuentry {
+    vt_chosen_img_path vt_chosen_path vt_chosen_size vt_chosen_name
+    
+    if vt_check_password "${vt_chosen_path}"; then
+        return
+    fi
+    
+    if ventoy_vcfg_proc "${vt_chosen_path}"; then        
+        return
+    fi
+    
+    unset vt_vlnk_dst
+    if vt_is_vlnk_name "${vt_chosen_path}"; then
+        vt_get_vlnk_dst "${vtoy_iso_part}${vt_chosen_path}" vt_vlnk_dst
+        if [ -z "$vt_vlnk_dst" ]; then
+            echo -e "\n### VLNK FILE NOT FOUND ###\n### VLNK 文件不存在 ###\n"            
+            ventoy_pause
+            return
+        fi
+    else
+        vt_vlnk_dst="${vt_chosen_path}"
+        if [ "$VTOY_VHD_NO_WARNING" != "1" ]; then
+            if [ "$vtoy_iso_fs" != "ntfs" ]; then
+                echo -e "!!! WARNING !!!\n"
+                echo -e "\nPartition1 ($vtoy_iso_fs) is NOT ntfs, the VHD(x) file may not boot normally \n"
+                echo -e "\nVHD(x) 文件所在分区不是 ntfs 格式, 可能无法正常启动 \n\n"
+                echo -en "\n$VTLANG_ENTER_CONTINUE ..."
+                read vtInputKey
+            fi
+        fi
+    fi
+    
+    vhdboot_common_func "${vt_vlnk_dst}"
+}
+
+function vhd_unsupport_menuentry {
+    common_unsupport_menuentry
+}
+
+function vtoyboot_common_func {
+    set AltBootPart=0
+    set vtoysupport=0
+    
+    vt_get_vtoy_type "${1}" vtoytype parttype AltBootPart
+    
+    if vt_str_begin $vtoytype vhd; then    
+        set vtoysupport=1
+    elif [ "$vtoytype" = "raw" ]; then
+        set vtoysupport=1
+    elif [ "$vtoytype" = "vdi" ]; then
+        set vtoysupport=1
+    fi
+    
+    if [ $vtoysupport -eq 1 ]; then    
+        if [ "$grub_platform" = "pc" ]; then
+            if [ "$parttype" = "gpt" -a $AltBootPart -eq 0 ]; then
+                echo "The OS in the vdisk was created in UEFI mode, but current is Legacy BIOS mode."
+                echo "虚拟磁盘内的系统是在UEFI模式下创建的，而当前系统是Legacy BIOS模式，可能无法正常启动。"
+                ventoy_pause
+            fi
+        else
+            if [ "$parttype" = "mbr" -a $AltBootPart -eq 0 ]; then
+                echo "The OS in the vdisk was created in Legacy BIOS mode, but current is UEFI mode."
+                echo "虚拟磁盘内的系统是在Legacy BIOS模式下创建的，而当前系统是UEFI模式，可能无法正常启动。"
+                ventoy_pause
+            fi
+        fi
+
+        vt_img_sector "${1}"
+        vt_raw_chain_data "${1}"
+
+        ventoy_debug_pause
+        
+        if [ -n "$vtoy_chain_mem_addr" ]; then  
+            if [ "$grub_platform" = "pc" ]; then
+                vt_acpi_param ${vtoy_chain_mem_addr} 512
+                linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} bios80  sector512  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}   
+                boot
+            else
+                if vt_check_secureboot_var; then
+                    vt_acpi_param ${vtoy_chain_mem_addr} 512
+                fi
+                ventoy_cli_console
+                chainloader ${vtoy_path}/ventoy_${VTOY_EFI_ARCH}.efi sector512 env_param=${ventoy_env_param} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+                boot
+                ventoy_gui_console
+            fi  
+        else
+            echo "chain empty failed!"
+            ventoy_pause
+        fi
+    else
+        echo "Unsupported vtoy type $vtoytype"
+        ventoy_pause
+    fi
+}
+
+function vtoy_common_menuentry {    
+    vt_chosen_img_path vt_chosen_path vt_chosen_size vt_chosen_name
+    
+    if vt_check_password "${vt_chosen_path}"; then
+        return
+    fi    
+    
+    if ventoy_vcfg_proc "${vt_chosen_path}"; then        
+        return
+    fi
+    
+    unset vt_vlnk_dst
+    if vt_is_vlnk_name "${vt_chosen_path}"; then
+        vt_get_vlnk_dst "${vtoy_iso_part}${vt_chosen_path}" vt_vlnk_dst
+        if [ -z "$vt_vlnk_dst" ]; then
+            echo -e "\n### VLNK FILE NOT FOUND ###\n### VLNK 文件不存在 ###\n"            
+            ventoy_pause
+            return
+        fi

     else
     else

-        legacy_linux_menu_func  $1 ${chosen_path}
+        vt_vlnk_dst="${vtoy_iso_part}${vt_chosen_path}"
+    fi
+    
+    vtoyboot_common_func "${vt_vlnk_dst}"
+}
+
+function vtoy_unsupport_menuentry {
+    common_unsupport_menuentry
+}
+
+#
+#============================================================#
+# IMG file boot process                                      #
+#============================================================#
+#
+
+function only_uefi_tip {
+    echo -e "\n This IMG file is only supported in UEFI mode. \n"
+    echo -en "\n$VTLANG_ENTER_EXIT ..."
+    read vtInputKey 
+}
+
+function ventoy_img_easyos {
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+    
+    loopback easysfs (vtimghd,1)/easy.sfs
+    vt_get_lib_module_ver (easysfs) /lib/modules/ vt_module_ver
+    
+    if [ -n "$vt_module_ver" ]; then        
+        for mod in "kernel/drivers/md/dm-mod.ko" "kernel/drivers/dax/dax.ko"; do
+            if [ -e (easysfs)/lib/modules/$vt_module_ver/$mod ]; then
+                vt_img_extra_initrd_append  (easysfs)/lib/modules/$vt_module_ver/$mod
+            fi
+        done
+    fi
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy
+    vt_img_hook_root
+    
+    syslinux_configfile (vtimghd,1)/syslinux.cfg
+    
+    vt_img_unhook_root
+    vt_unset_boot_opt
+    loopback -d easysfs
+}
+
+function ventoy_img_easyos2 {
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+    
+    if [ -e (vtimghd,2)/easyos/easy.sfs ]; then
+        loopback easysfs (vtimghd,2)/easyos/easy.sfs
+    elif [ -d (vtimghd,2)/easyos/releases ]; then
+        vt_fs_enum_1st_dir (vtimghd,2) /easyos/releases/ vt_dir_name
+        loopback easysfs (vtimghd,2)/easyos/releases/$vt_dir_name/easy.sfs
+    fi
+    
+    vt_get_lib_module_ver (easysfs) /lib/modules/ vt_module_ver
+    
+    if [ -n "$vt_module_ver" ]; then        
+        for mod in "kernel/drivers/md/dm-mod.ko" "kernel/drivers/dax/dax.ko"; do
+            if [ -e (easysfs)/lib/modules/$vt_module_ver/$mod ]; then
+                vt_img_extra_initrd_append  (easysfs)/lib/modules/$vt_module_ver/$mod
+            fi
+        done
+    fi
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy
+    vt_img_hook_root
+    
+    vt_limine_menu (vtimghd,1)/limine.cfg vt_sys_menu_mem
+    configfile "mem:${vt_sys_menu_mem_addr}:size:${vt_sys_menu_mem_size}"
+    
+    vt_img_unhook_root
+    vt_unset_boot_opt
+    loopback -d easysfs
+}
+
+function ventoy_img_volumio {
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy imgpart=/dev/ventoy2 bootpart=/dev/ventoy1
+    vt_img_hook_root
+    
+    syslinux_configfile (vtimghd,1)/syslinux.cfg
+    
+    vt_img_unhook_root
+    vt_unset_boot_opt
+}
+
+function ventoy_img_openelec {
+    elec_ver=$1
+    
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+
+    loopback vtloopex $vtoy_efi_part/ventoy/vtloopex.cpio    
+    vt_img_extra_initrd_append  (vtloopex)/$elec_ver/vtloopex.tar.xz
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=$elec_ver
+    vt_img_hook_root
+    
+    set root=(vtimghd,1)
+    syslinux_configfile (vtimghd,1)/syslinux.cfg
+    
+    vt_img_unhook_root
+    vt_unset_boot_opt
+    loopback -d vtloopex
+}
+
+
+function ventoy_img_freedombox {
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+
+    vt_get_lib_module_ver (vtimghd,1) /lib/modules/ vt_module_ver
+    if [ -n "$vt_module_ver" ]; then        
+        vt_img_extra_initrd_append  (vtimghd,1)/lib/modules/$vt_module_ver/kernel/drivers/md/dm-mod.ko
+    fi
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=freedombox
+    vt_img_hook_root
+    
+    configfile (vtimghd,1)/boot/grub/grub.cfg
+    
+    vt_img_unhook_root
+    vt_unset_boot_opt
+}
+
+function ventoy_img_paldo {
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=paldo
+    vt_img_hook_root
+    
+    vt_fs_enum_1st_file (vtimghd,1) /loader/entries/ vt_paldo_entry_conf
+    vt_file_basename $vt_paldo_entry_conf vtPaldoVer
+    
+    echo loading file...
+    linux (vtimghd,1)/linux-${vtPaldoVer} root=/dev/ventoy1 rootfstype=vfat
+    initrd (vtimghd,1)/initramfs-${vtPaldoVer}
+    boot
+    
+    vt_img_unhook_root
+    vt_unset_boot_opt
+}
+
+function ventoy_img_ubos {
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+
+    vt_get_lib_module_ver (vtimghd,3) /lib/modules/ vt_module_ver
+    if [ -n "$vt_module_ver" ]; then        
+        vt_img_extra_initrd_append  (vtimghd,3)/lib/modules/$vt_module_ver/kernel/drivers/md/dm-mod.ko.xz

     fi
     fi

-}

 
 

-function legacy_iso_memdisk {
+    ventoy_debug_pause

 
 

-    linux16   $vtoy_path/memdisk iso raw    
-    echo "Loading ISO file to memory ..."
-    initrd16  ${1}${2}
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=ubos
+    vt_img_hook_root
+    
+    echo loading file...
+    linux (vtimghd,2)/vmlinuz-linux root=/dev/ventoy3 rw
+    initrd (vtimghd,2)/initramfs-linux.img

     boot
     boot

+
+    vt_img_unhook_root
+    vt_unset_boot_opt

 }
 
 }
 

+function ventoy_img_recalbox {
+    if [ $vtoy_img_max_part_end -GT $vt_chosen_size ]; then
+        echo -e "\nPlease extend the img file size before boot it. \n"
+        ventoy_pause
+        return
+    fi

 
 

-function iso_endless_os_proc {
-    if [ -d (loop)/ ]; then
-        loopback -d loop
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+
+    if [ -e (vtimghd,1)/boot/recalbox ]; then
+        loopback recalbox (vtimghd,1)/boot/recalbox
+        vt_get_lib_module_ver (recalbox) /lib/modules/ vt_module_ver
+        if [ -n "$vt_module_ver" ]; then        
+            vt_img_extra_initrd_append  (recalbox)/lib/modules/$vt_module_ver/kernel/drivers/md/dm-mod.ko
+        fi

     fi
 
     fi
 

-    loopback loop ${1}${2}   
-    vt_img_sector ${1}${2}
+    ventoy_debug_pause

 
 

-    vt_load_cpio  $vtoy_path/ventoy.cpio  $2 $1  "busybox=$ventoy_busybox_ver"
-    vt_trailer_cpio $1 $2 noinit
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=recalbox
+    vt_img_hook_root

     
     

+    set root=(vtimghd,1)
+    configfile (vtimghd,1)/boot/grub/grub.cfg
+
+    vt_img_unhook_root
+    vt_unset_boot_opt
+}
+
+function ventoy_img_esysrescue {
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+

     ventoy_debug_pause
 
     ventoy_debug_pause
 

-    vt_set_boot_opt '@kparams' rdinit=/vtoy/vtoy 
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=esysrescue
+    vt_img_hook_root

 
 

-    set eosimage=loop
-    set ventoy_bls_bootdev=/boot    
-    set ventoy_loading_tip="Loading files ......"
-    
-    export eosimage    
-    configfile (loop)/endless/grub/grub.cfg
-    
-    unset eosimage
-    unset ventoy_bls_bootdev
-    unset ventoy_loading_tip
-    
+    set root=(vtimghd,1)
+    configfile (vtimghd,1)/boot/grub/grub.cfg
+
+    vt_img_unhook_root

     vt_unset_boot_opt
 }
 
     vt_unset_boot_opt
 }
 

+function ventoy_img_batocera {
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit

 
 

-function ventoy_iso_busybox_ver {
-    set ventoy_busybox_ver=32
-    
-    #special process for deepin-live iso
-    if [ "$vt_chosen_size" = "403701760" ]; then
-        if vt_str_begin $vt_chosen_path "/deepin-live"; then
-            set ventoy_busybox_ver=64
-        fi
-    fi
-}
+    ventoy_debug_pause

 
 

-function iso_common_menuentry {
-    unset vt_system_id
-    unset vt_volume_id
-    
-    vt_chosen_img_path vt_chosen_path vt_chosen_size
-    vt_parse_iso_volume ${vtoy_iso_part}${vt_chosen_path} vt_system_id vt_volume_id
-    
-    ventoy_iso_busybox_ver
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=batocera
+    vt_img_hook_root

     
     

-    #special process for Endless OS
-    if vt_str_begin $vt_volume_id "Endless-OS"; then
-        iso_endless_os_proc $vtoy_iso_part $vt_chosen_path
-    fi
+    set root=(vtimghd,1)
+    syslinux_configfile (vtimghd,1)/boot/syslinux/syslinux.cfg

 
 

-    if [ "$grub_platform" = "pc" ]; then
-        if vt_check_mode 0; then
-            legacy_iso_memdisk $vtoy_iso_part $vt_chosen_path
-        else
-            legacy_iso_menu_func $vtoy_iso_part $vt_chosen_path
-        fi
-    else
-        if vt_check_mode 0; then
-            uefi_iso_memdisk $vtoy_iso_part  $vt_chosen_path
-        else
-            uefi_iso_menu_func $vtoy_iso_part  $vt_chosen_path             
-        fi
-    fi      
+    vt_img_unhook_root
+    vt_unset_boot_opt

 }
 
 }
 

-function common_unsupport_menuentry {
-    echo -e "\n The name of the iso file could NOT contain space or non-ascii characters. \n"
-    echo -e " 文件名中不能有中文或空格 \n"    
-    echo -e "\npress ENTER to exit (请按 回车 键返回) ..."    
-    read vtInputKey
-}
+function ventoy_img_openwrt {
+    if [ -e (vtimghd,2)/lib64 ]; then
+        set ventoy_busybox_ver=64
+    fi

 
 

-function iso_unsupport_menuentry {
-    common_unsupport_menuentry
-}
+    vt_fs_enum_1st_dir (vtimghd,2) /lib/modules/ vt_dir_name

 
 

-function wim_common_menuentry {
-    vt_chosen_img_path vt_chosen_path vt_chosen_size
-    vt_wim_chain_data ${vtoy_iso_part}${vt_chosen_path}
-    
-    ventoy_debug_pause    
-    
-    if [ -n "$vtoy_chain_mem_addr" ]; then
-        if [ "$grub_platform" = "pc" ]; then
-            linux16   $vtoy_path/ipxe.krn ${vtdebug_flag}  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
-        else
-            ventoy_cli_console
-            chainloader ${vtoy_path}/ventoy_x64.efi  env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+    if [ -f (vtimghd,2)/lib/modules/$vt_dir_name/dm-mod.ko ]; then
+        set openwrt_plugin_need=0
+        vt_img_extra_initrd_append  (vtimghd,2)/lib/modules/$vt_dir_name/dm-mod.ko
+        if [ -f (vtimghd,2)/lib/modules/$vt_dir_name/dax.ko ]; then
+            vt_img_extra_initrd_append  (vtimghd,2)/lib/modules/$vt_dir_name/dax.ko
+        fi
+    else
+        set openwrt_plugin_need=1
+        if [ ! -f ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz ]; then

             ventoy_gui_console
             ventoy_gui_console

+            echo -e "\n ventoy_openwrt.xz not found. Please refer https://www.ventoy.net/en/doc_openwrt.html.\n"
+            echo -e " 未找到 ventoy_openwrt.xz 文件。请参考 https://www.ventoy.net/cn/doc_openwrt.html\n"
+            echo -en "\n$VTLANG_ENTER_EXIT ..."
+            read vtInputKey
+            ventoy_cli_console
+            return

         fi
         fi

-        boot
+    fi
+
+    if vt_img_check_range "${vtoy_iso_part}${vt_chosen_path}"; then
+        ventoy_debug_pause

     else
     else

-        echo "chain empty failed"
-        ventoy_pause
+        ventoy_gui_console
+        echo -e "\n IMG file need processed. Please refer https://www.ventoy.net/en/doc_openwrt.html.\n"
+        echo -e " 此 IMG 文件必须处理之后才能支持。请参考 https://www.ventoy.net/cn/doc_openwrt.html\n"
+        echo -e "\n press ENTER to exit (请按 回车 键返回) ..."
+        read vtInputKey
+        ventoy_cli_console
+        return

     fi
     fi

-}
+    
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit

 
 

-function wim_unsupport_menuentry {
-    common_unsupport_menuentry
-}
+    if [ $openwrt_plugin_need -eq 1 ]; then
+        if [ -f ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz ]; then
+            vt_img_extra_initrd_append  ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz
+        fi
+    fi

 
 

-function efi_common_menuentry {
-    vt_chosen_img_path vt_chosen_path vt_chosen_size
-    
-    vt_concat_efi_iso ${vtoy_iso_part}${vt_chosen_path} vtoy_iso_buf
-    
-    ventoy_debug_pause
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=openwrt
+    vt_img_hook_root

     
     

-    ventoy_cli_console    
-    chainloader ${vtoy_path}/ventoy_x64.efi memdisk env_param=${env_param} isoefi=on ${vtdebug_flag} mem:${vtoy_iso_buf_addr}:size:${vtoy_iso_buf_size}
-    boot
-    ventoy_gui_console
-}
+    set root=(vtimghd,1)
+    configfile (vtimghd,1)/boot/grub/grub.cfg

 
 

-function efi_unsupport_menuentry {
-    common_unsupport_menuentry
+    vt_img_unhook_root
+    vt_unset_boot_opt

 }
 
 }
 

-#
-#============================================================#
-# IMG file boot process                                      #
-#============================================================#
-#
+function ventoy_img_tails {
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit

 
 

+    ventoy_debug_pause

 
 

-function ventoy_img_easyos {
-    vt_load_cpio  $vtoy_path/ventoy.cpio  ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
-    vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit
-    
-    loopback easysfs (vtimghd,1)/easy.sfs
-    vt_get_lib_module_ver (easysfs) /lib/modules/ vt_module_ver
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy live-media=/dev/dm-1 ventoyos=tails
+    vt_img_hook_root

     
     

-    if [ -n "$vt_module_ver" ]; then        
-        for mod in "kernel/drivers/md/dm-mod.ko" "kernel/drivers/dax/dax.ko"; do
-            vt_img_extra_initrd_append  (easysfs)/lib/modules/$vt_module_ver/$mod
-        done
+    set root=(vtimghd,1)
+    configfile (vtimghd,1)/efi/debian/grub.cfg
+
+    vt_img_unhook_root
+    vt_unset_boot_opt
+}
+
+function ventoy_img_fydeos {
+    if [ "$grub_platform" = "pc" ]; then
+        only_uefi_tip
+        return

     fi
 
     fi
 

+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=64"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+

     ventoy_debug_pause
 
     #boot image file
     ventoy_debug_pause
 
     #boot image file

-    vt_set_boot_opt rdinit=/vtoy/vtoy
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=fydeos

     vt_img_hook_root
     vt_img_hook_root

-    
-    syslinux_configfile (vtimghd,1)/syslinux.cfg
-    
+
+    set grubdisk=vtimghd
+    set grubpartA=(vtimghd,3)
+    set grubpartB=(vtimghd,5)
+    set linuxpartA=(sda,3)
+    set linuxpartB=(sda,5)
+
+    set root=(vtimghd,12)
+    configfile (vtimghd,12)/efi/boot/grub.cfg
+

     vt_img_unhook_root
     vt_unset_boot_opt
     vt_img_unhook_root
     vt_unset_boot_opt

-    loopback -d easysfs
+    
+    unset grubdisk
+    unset grubpartA
+    unset grubpartB
+    unset linuxpartA
+    unset linuxpartB

 }
 
 }
 

-function ventoy_img_volumio {
-    vt_load_cpio  $vtoy_path/ventoy.cpio  ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
-    vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit
+function ventoy_img_cloudready {
+    if [ "$grub_platform" = "pc" ]; then
+        only_uefi_tip
+        return
+    fi
+
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=64"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit

 
     ventoy_debug_pause
 
     #boot image file
 
     ventoy_debug_pause
 
     #boot image file

-    vt_set_boot_opt rdinit=/vtoy/vtoy imgpart=/dev/ventoy2 bootpart=/dev/ventoy1
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=cloudready

     vt_img_hook_root
     vt_img_hook_root

-    
-    syslinux_configfile (vtimghd,1)/syslinux.cfg
-    
+
+    set grubdisk=vtimghd
+    set grubpartA=(vtimghd,3)
+    set grubpartB=(vtimghd,5)
+    set linuxpartA=(sda,3)
+    set linuxpartB=(sda,5)
+
+    set root=(vtimghd,12)    
+    configfile (vtimghd,12)/efi/boot/grub.cfg
+

     vt_img_unhook_root
     vt_unset_boot_opt
     vt_img_unhook_root
     vt_unset_boot_opt

+    
+    unset grubdisk
+    unset grubpartA
+    unset grubpartB
+    unset linuxpartA
+    unset linuxpartB

 }
 
 }
 

+function ventoy_img_memtest86 {      
+    chainloader (vtimghd,1)/efi/boot/BOOTX64.efi
+    boot
+}
+
+function img_unsupport_tip {
+    echo -e "\n This IMG file is NOT supported now. \n"
+    echo -e " 当前不支持启动此 IMG 文件 \n"    
+    echo -en "\n$VTLANG_ENTER_EXIT ..."
+    read vtInputKey 
+}
+
+function legacy_img_memdisk {
+    linux16   $vtoy_path/memdisk
+    echo "Loading img file to memory ..."
+    initrd16  "${1}${2}"
+    
+    ventoy_cli_console
+    boot
+}

 
 function img_common_menuentry {
 
 function img_common_menuentry {

+    set ventoy_compatible=YES

     set ventoy_busybox_ver=32
     set ventoy_busybox_ver=32

+    unset LoadIsoEfiDriver
+
+    vt_chosen_img_path vt_chosen_path vt_chosen_size vt_chosen_name

     
     

-    vt_chosen_img_path vt_chosen_path vt_chosen_size
+    if vt_check_password "${vt_chosen_path}"; then
+        return
+    fi
+
+    if ventoy_vcfg_proc "${vt_chosen_path}"; then        
+        return
+    fi

 
 

-    if [ -d (vtimghd)/ ]; then
-        loopback -d vtimghd
+    if [ "$grub_platform" = "pc" ]; then
+        if vt_check_mode 0 "$vt_chosen_name"; then
+            legacy_img_memdisk $vtoy_iso_part "$vt_chosen_path"
+            return
+        fi

     fi
 
     fi
 

-    loopback vtimghd ${vtoy_iso_part}${vt_chosen_path}
-    vt_img_sector ${vtoy_iso_part}${vt_chosen_path}
+    loopback vtimghd "${vtoy_iso_part}${vt_chosen_path}"
+    vt_img_sector "${vtoy_iso_part}${vt_chosen_path}"

 
     vt_img_part_info (vtimghd)
 
     set vtback_root=$root
     ventoy_cli_console
     vt_push_last_entry
 
     vt_img_part_info (vtimghd)
 
     set vtback_root=$root
     ventoy_cli_console
     vt_push_last_entry

+    set vtback_theme=$theme
+    unset theme

 
     vt_img_extra_initrd_reset
 
 
     vt_img_extra_initrd_reset
 

-    #vt_get_fs_label (vtimghd,1) vtImgHd1Label
-    
-    if [ -e (vtimghd,1)/easy.sfs ]; then
+
+    vt_get_fs_label (vtimghd,1) vtImgHd1Label
+
+    if [ "$vtImgHd1Label" = "STATE" ]; then
+        vt_get_fs_label (vtimghd,3) vtImgHd3Label
+    elif [ -d (vtimghd,2)/lib ]; then
+        vt_get_fs_label (vtimghd,2) vtImgHd2Label
+    fi
+
+    if [ -e (vtimghd,1)/etc/hostname ]; then
+        vt_1st_line (vtimghd,1)/etc/hostname vtImgHostname
+    fi
+
+    if vt_str_begin "$vtImgHd3Label" "ROOT-"; then
+        if [ -f (vtimghd,3)/etc/os-release.d/ID ]; then 
+            vt_1st_line (vtimghd,3)/etc/os-release.d/ID vt_release_line1
+            if vt_str_begin "$vt_release_line1" "FydeOS"; then
+                ventoy_img_fydeos
+            else
+                ventoy_img_cloudready
+            fi
+        elif [ -f (vtimghd,3)/etc/cloudready-release ]; then
+            ventoy_img_cloudready
+        elif [ -f (vtimghd,3)/etc/chrome_dev.conf ]; then
+            ventoy_img_cloudready
+        fi
+    elif vt_str_begin "$vtImgHd1Label" "LAKKA"; then
+        ventoy_img_openelec lakka
+    elif vt_str_begin "$vtImgHd1Label" "LIBREELEC"; then
+        ventoy_img_openelec LibreELEC
+    elif vt_str_begin "$vtImgHd1Label" "paldo-live"; then
+        ventoy_img_paldo
+    elif vt_str_begin "$vtImgHostname" "freedombox"; then
+        ventoy_img_freedombox
+    elif vt_str_begin "$vtImgHd1Label" "BATOCERA"; then
+        ventoy_img_batocera
+    elif vt_str_begin "$vtImgHd1Label" "Tails"; then
+        ventoy_img_tails
+    elif [ "$vtImgHd2Label" = "RECALBOX" -o "$vtImgHd1Label" = "RECALBOX" ]; then
+        ventoy_img_recalbox
+    elif [ "$vtImgHd1Label" = "ESYSRESCUE" ]; then
+        ventoy_img_esysrescue
+    elif [ -e (vtimghd,1)/easy.sfs ]; then

         ventoy_img_easyos
         ventoy_img_easyos

+    elif [ -d (vtimghd,2)/easyos ]; then
+        ventoy_img_easyos2

     elif [ -e (vtimghd,1)/volumio.initrd ]; then
         ventoy_img_volumio
     elif [ -e (vtimghd,1)/volumio.initrd ]; then
         ventoy_img_volumio

-    
-
+    elif [ -f (vtimghd,2)/loader/entries/ubos.conf ]; then
+        ventoy_img_ubos
+    elif [ -f (vtimghd,2)/etc/openwrt_version ]; then
+        ventoy_img_openwrt    

     else
     else

-        echo -e "\n This IMG file is NOT supported now. \n"
-        echo -e " 当前不支持启动此 IMG 文件 \n"    
-        echo -e "\npress ENTER to exit (请按 回车 键返回) ..."    
-        read vtInputKey        
+        if [ -f (vtimghd,1)/efi/boot/mt86.png ]; then 
+            if [ "$grub_platform" = "pc" ]; then
+                img_unsupport_tip
+            fi 
+        fi
+
+        #common chain
+        vt_linux_chain_data "${vtoy_iso_part}${vt_chosen_path}"
+        ventoy_acpi_param ${vtoy_chain_mem_addr} 512
+        if [ "$grub_platform" = "pc" ]; then 
+            linux16 $vtoy_path/ipxe.krn ${vtdebug_flag}  sector512  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}   
+            boot
+        else            
+            chainloader ${vtoy_path}/ventoy_${VTOY_EFI_ARCH}.efi sector512 env_param=${env_param} isoefi=${LoadIsoEfiDriver} FirstTry=${FirstTryBootFile} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+            boot
+        fi

     fi
 
     fi
 

+    loopback -d vtimghd
+

     set root=$vtback_root
     vt_pop_last_entry
     set root=$vtback_root
     vt_pop_last_entry

+    set theme=$vtback_theme

     ventoy_gui_console
     ventoy_gui_console

+    set ventoy_compatible=NO

 }
 
 function img_unsupport_menuentry {
     common_unsupport_menuentry
 }
 
 }
 
 function img_unsupport_menuentry {
     common_unsupport_menuentry
 }
 

+function mimg_common_menuentry {
+    vt_chosen_img_path vt_chosen_path vt_chosen_size vt_chosen_name
+
+    if vt_check_password "${vt_chosen_path}"; then
+        return
+    fi
+
+    echo "memdisk mode boot for $vt_chosen_path"
+    echo ""
+    ventoy_debug_pause
+
+    if [ "$grub_platform" = "pc" ]; then
+        legacy_img_memdisk $vtoy_iso_part "$vt_chosen_path"
+    else
+        vt_load_img_memdisk "$vtoy_iso_part$vt_chosen_path" vtoy_img_buf
+        ventoy_cli_console
+        chainloader ${vtoy_path}/ventoy_${VTOY_EFI_ARCH}.efi memdisk env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_img_buf_addr}:size:${vtoy_img_buf_size}
+        boot
+        ventoy_gui_console    
+    fi      
+}
+

 #############################################################
 #############################################################
 #############################################################
 #############################################################
 #############################################################
 #############################################################


@@ -957,7 +2387,10 @@ function img_unsupport_menuentry {
 #############################################################
 #############################################################
 
 #############################################################
 #############################################################
 

-set VENTOY_VERSION="1.0.19"
+set VENTOY_VERSION="1.0.86"
+
+#ACPI not compatible with Window7/8, so disable by default
+set VTOY_PARAM_NO_ACPI=1

 
 # Default menu display mode, you can change it as you want.
 #    0: List mode   
 
 # Default menu display mode, you can change it as you want.
 #    0: List mode   


@@ -966,17 +2399,37 @@ set VTOY_DEFAULT_MENU_MODE=0
 
 set VTOY_MEM_DISK_STR="[Memdisk]"
 set VTOY_ISO_RAW_STR="Compatible Mode"
 
 set VTOY_MEM_DISK_STR="[Memdisk]"
 set VTOY_ISO_RAW_STR="Compatible Mode"

+set VTOY_GRUB2_MODE_STR="GRUB2 Mode"
+set VTOY_WIMBOOT_MODE_STR="WIMBOOT Mode"

 set VTOY_ISO_UEFI_DRV_STR="UEFI FS"
 
 set VTOY_ISO_UEFI_DRV_STR="UEFI FS"
 

-set VTOY_F2_CMD="ventoy_power"
+set VTOY_F2_CMD="vt_browser_disk"

 set VTOY_F4_CMD="ventoy_localboot"
 set VTOY_F5_CMD="ventoy_diagnosis"
 set VTOY_F6_CMD="ventoy_ext_menu"
 set VTOY_F4_CMD="ventoy_localboot"
 set VTOY_F5_CMD="ventoy_diagnosis"
 set VTOY_F6_CMD="ventoy_ext_menu"

+set VTOY_HELP_CMD="ventoy_show_help"
+set VTOY_CHKSUM_CMD="ventoy_checksum"
+set VTOY_HELP_TXT_LANGUAGE="en_US"
+set VTOY_CHKSUM_FILE_PATH="X"
+set VTOY_LANG_CMD="ventoy_language"
+

 
 if [ "$grub_platform" = "pc" ]; then
     set VTOY_TEXT_MENU_VER="Ventoy $VENTOY_VERSION BIOS  www.ventoy.net"
 
 if [ "$grub_platform" = "pc" ]; then
     set VTOY_TEXT_MENU_VER="Ventoy $VENTOY_VERSION BIOS  www.ventoy.net"

-else
-    set VTOY_TEXT_MENU_VER="Ventoy $VENTOY_VERSION UEFI  www.ventoy.net"
+else    
+    if [ "$grub_cpu" = "i386" ]; then
+        set VTOY_EFI_ARCH=ia32
+        set VTOY_TEXT_MENU_VER="Ventoy $VENTOY_VERSION IA32  www.ventoy.net"
+    elif [ "$grub_cpu" = "arm64" ]; then
+        set VTOY_EFI_ARCH=aa64
+        set VTOY_TEXT_MENU_VER="Ventoy $VENTOY_VERSION AA64  www.ventoy.net"
+    elif [ "$grub_cpu" = "mips64el" ]; then
+        set VTOY_EFI_ARCH=mips
+        set VTOY_TEXT_MENU_VER="Ventoy $VENTOY_VERSION MIPS  www.ventoy.net"
+    else
+        set VTOY_EFI_ARCH=x64
+        set VTOY_TEXT_MENU_VER="Ventoy $VENTOY_VERSION UEFI  www.ventoy.net"    
+    fi

 fi
 
 vt_device $root  vtoy_dev
 fi
 
 vt_device $root  vtoy_dev


@@ -984,16 +2437,22 @@ vt_device $root  vtoy_dev
 if [ "$vtoy_dev" = "tftp" ]; then
     set vtoy_path=($root)
     for vtid in 0 1 2 3; do
 if [ "$vtoy_dev" = "tftp" ]; then
     set vtoy_path=($root)
     for vtid in 0 1 2 3; do

-        if [ -d (hd$vtid,2)/ventoy ]; then
+        if [ -f (hd$vtid,2)/ventoy/ventoy.cpio ]; then

             set vtoy_iso_part=(hd$vtid,1)
             set vtoy_efi_part=(hd$vtid,2)
             set vtoy_iso_part=(hd$vtid,1)
             set vtoy_efi_part=(hd$vtid,2)

+            set vtoydev=hd$vtid

             break
         fi
     done
     loadfont ascii
 
             break
         fi
     done
     loadfont ascii
 

+    if [ -n "$vtoy_efi_part" ]; then
+        vt_load_file_to_mem "auto" $vtoy_efi_part/grub/fonts/unicode.pf2 vtoy_font_mem
+        loadfont mem:${vtoy_font_mem_addr}:size:${vtoy_font_mem_size}
+    fi
+

     if [ -f $vtoy_iso_part/ventoy/ventoy.json ]; then
     if [ -f $vtoy_iso_part/ventoy/ventoy.json ]; then

-       set vt_plugin_path=$vtoy_iso_part
+        set vt_plugin_path=$vtoy_iso_part

     else
         set vt_plugin_path=$prefix
         vt_load_plugin $vt_plugin_path
     else
         set vt_plugin_path=$prefix
         vt_load_plugin $vt_plugin_path


@@ -1005,16 +2464,35 @@ else
         set vtoy_path=($root)/ventoy
     fi
 
         set vtoy_path=($root)/ventoy
     fi
 

+    set vtoydev=$vtoy_dev

     set vtoy_iso_part=($vtoy_dev,1)
     set vtoy_efi_part=($vtoy_dev,2)
     set vtoy_iso_part=($vtoy_dev,1)
     set vtoy_efi_part=($vtoy_dev,2)

-    loadfont unicode
+    
+    vt_load_file_to_mem "auto" $prefix/fonts/unicode.pf2 vtoy_font_mem
+    loadfont mem:${vtoy_font_mem_addr}:size:${vtoy_font_mem_size}
+

     set vt_plugin_path=$vtoy_iso_part
 fi
 
     set vt_plugin_path=$vtoy_iso_part
 fi
 

+#Load Partition Table
+vt_load_part_table $vtoydev
+
+#Load menu lang file
+ventoy_load_menu_lang_file

 
 #Load Plugin
 if [ -f $vtoy_iso_part/ventoy/ventoy.json ]; then
 
 #Load Plugin
 if [ -f $vtoy_iso_part/ventoy/ventoy.json ]; then

-   vt_load_plugin $vtoy_iso_part
+    clear
+    vt_load_plugin $vtoy_iso_part
+    clear
+else
+    vt_check_json_path_case $vtoy_iso_part
+fi
+
+if [ -n "$VTOY_MENU_LANGUAGE" ]; then
+    vt_init_menu_lang "$VTOY_MENU_LANGUAGE"
+else
+    vt_init_menu_lang en_US

 fi
 
 if [ -n "$VTOY_MENU_TIMEOUT" ]; then
 fi
 
 if [ -n "$VTOY_MENU_TIMEOUT" ]; then


@@ -1029,22 +2507,30 @@ elif [ -f $vtoy_efi_part/ventoy/ventoy_wimboot.img ]; then
     vt_load_wimboot $vtoy_efi_part/ventoy/ventoy_wimboot.img
 fi
 
     vt_load_wimboot $vtoy_efi_part/ventoy/ventoy_wimboot.img
 fi
 

+if [ -f $vtoy_iso_part/ventoy/ventoy_vhdboot.img ]; then
+    vt_load_vhdboot $vtoy_iso_part/ventoy/ventoy_vhdboot.img
+elif [ -f $vtoy_efi_part/ventoy/ventoy_vhdboot.img ]; then
+    vt_load_vhdboot $vtoy_efi_part/ventoy/ventoy_vhdboot.img
+fi
+

 
 if [ $VTOY_DEFAULT_MENU_MODE -eq 0 ]; then
     set VTOY_F3_CMD="vt_dynamic_menu 1 1"
 
 if [ $VTOY_DEFAULT_MENU_MODE -eq 0 ]; then
     set VTOY_F3_CMD="vt_dynamic_menu 1 1"

-    set VTOY_HOTKEY_TIP="F1:Memdisk  F2:Power  F3:TreeView  F4:Localboot  F5:Debug  F6:ExMenu"

 else
     set VTOY_F3_CMD="vt_dynamic_menu 1 0"
 else
     set VTOY_F3_CMD="vt_dynamic_menu 1 0"

-    set VTOY_HOTKEY_TIP="F1:Memdisk  F2:Power  F3:ListView  F4:Localboot  F5:Debug  F6:ExMenu"

 fi
 
 fi
 

+terminal_output  console

 
 if [ -n "$vtoy_gfxmode" ]; then
     set gfxmode=$vtoy_gfxmode
 
 if [ -n "$vtoy_gfxmode" ]; then
     set gfxmode=$vtoy_gfxmode

+    set gfxpayload=keep

 else
 else

-    set gfxmode=1920x1080,1366x768,1024x768
+    set gfxmode=1024x768
+    set gfxpayload=keep

 fi
 
 fi
 

+

 if [ "$vtoy_display_mode" = "CLI" ]; then
     terminal_output  console
 elif [ "$vtoy_display_mode" = "serial" ]; then
 if [ "$vtoy_display_mode" = "CLI" ]; then
     terminal_output  console
 elif [ "$vtoy_display_mode" = "serial" ]; then


@@ -1059,24 +2545,92 @@ elif [ "$vtoy_display_mode" = "serial_console" ]; then
     fi
     terminal_input   serial console
     terminal_output  serial console    
     fi
     terminal_input   serial console
     terminal_output  serial console    

-else    
+else
+    if [ "$vtoy_res_fit" = "1" ]; then
+        terminal_output  gfxterm
+    fi
+

     if [ -n "$vtoy_theme" ]; then
     if [ -n "$vtoy_theme" ]; then

-        set theme=$vtoy_theme
+        vt_set_theme

     else
         set theme=$prefix/themes/ventoy/theme.txt
     fi
     terminal_output  gfxterm
 fi
 
     else
         set theme=$prefix/themes/ventoy/theme.txt
     fi
     terminal_output  gfxterm
 fi
 

+if [ "$grub_platform" = "efi" ]; then
+    set mouse_delta=4000
+    # terminal_input --append mouse
+fi
+
+if [ -n "$VTOY_DEFAULT_KBD_LAYOUT" ]; then
+    set_keyboard_layout "$VTOY_DEFAULT_KBD_LAYOUT"
+fi
+
+if [ -n "$VTOY_PLUGIN_PATH_CASE_MISMATCH" ]; then
+    clear
+    echo "$VTOY_PLUGIN_PATH_CASE_MISMATCH"
+    echo -e "\n\nPath case does not match! ventoy directory and ventoy.json MUST be all lowercase!"
+    echo -e "\n路径大小写不匹配！ventoy 目录和 ventoy.json 文件的名字必须是全部小写，请修正！"
+    echo -e "\n\npress ENTER to continue (请按回车键继续) ..."
+    read vtInputKey
+fi
+
+if [ -n "$VTOY_PLUGIN_SYNTAX_ERROR" ]; then
+    clear
+    if [ -n "$VTOY_PLUGIN_ENCODE_ERROR" ]; then
+        echo -e "\n Encoding type for ventoy.json is not supported, please convert to UTF-8.\n"
+        echo -e " ventoy.json 文件编码格式不支持，请转换为 UTF-8 编码格式！\n"
+    else
+        echo -e "\n Syntax error detected in ventoy.json, please check! \n"
+        echo -e " ventoy.json 文件中有语法错误，所有配置都不会生效，请检查！\n"         
+    fi
+
+    echo -e "\n press ENTER to continue (请按 回车 键继续) ..."
+    read vtInputKey
+fi
+
+
+for vtTFile in ventoy.json ventoy_grub.cfg; do
+    if [ -f $vtoy_efi_part/ventoy/$vtTFile ]; then
+        clear
+        echo -e "\n You need to put $vtTFile in the 1st partition which hold the ISO files.\n"
+        echo -e " $vtTFile 放错分区了，请放到镜像分区里的 ventoy 目录下（此目录需要手动创建）！\n"
+        echo -e "\n press ENTER to continue (请按 回车 键继续) ..."
+        read vtInputKey
+    fi
+done
+
+#clear all input key before show main menu
+vt_clear_key
+

 #export necessary variable
 export theme
 export gfxmode
 #export necessary variable
 export theme
 export gfxmode

-export vtoy_dev
+export gfxpayload
+export vtoydev
+export vtoy_path
+export vtdebug_flag
+export vtoy_iso_fs

 export vtoy_iso_part
 export vtoy_efi_part
 export VENTOY_VERSION
 export vtoy_iso_part
 export vtoy_efi_part
 export VENTOY_VERSION

-
-
+export VTOY_CUR_VIDEO_MODE
+export VTOY_EFI_ARCH
+export VTOY_MEM_DISK_STR
+export VTOY_ISO_RAW_STR
+export VTOY_GRUB2_MODE_STR
+export VTOY_WIMBOOT_MODE_STR
+export VTOY_ISO_UEFI_DRV_STR
+export VTOY_F2_CMD
+export VTOY_F4_CMD
+export VTOY_F5_CMD
+export VTOY_F6_CMD
+export VTOY_HELP_CMD
+export VTOY_CHKSUM_CMD
+export VTOY_HELP_TXT_LANGUAGE
+export VTOY_CHKSUM_FILE_PATH
+export VTOY_LANG_CMD

 
 
 #colect all image files (iso files)
 
 
 #colect all image files (iso files)


@@ -1092,14 +2646,50 @@ if [ $ventoy_img_count -gt 0 ]; then
     fi
 else
     if [ -n "$VTOY_NO_ISO_TIP" ]; then
     fi
 else
     if [ -n "$VTOY_NO_ISO_TIP" ]; then

-        NO_ISO_MENU="No ISO files found, $VTOY_NO_ISO_TIP"
+        NO_ISO_MENU="No ISO or supported IMG files found, $VTOY_NO_ISO_TIP"

     elif [ -n "$VTOY_DEFAULT_SEARCH_ROOT" ]; then
     elif [ -n "$VTOY_DEFAULT_SEARCH_ROOT" ]; then

-        NO_ISO_MENU="No ISO files found, please check VTOY_DEFAULT_SEARCH_ROOT"
+        NO_ISO_MENU="No ISO or supported IMG files found, please check VTOY_DEFAULT_SEARCH_ROOT"

     else
     else

-        NO_ISO_MENU="No ISO files found"
+        NO_ISO_MENU="No ISO or supported IMG files found"

     fi
     menuentry "$NO_ISO_MENU (Press enter to reboot ...)" {
         echo -e "\n    Rebooting ... "
         reboot
     }
 fi
     fi
     menuentry "$NO_ISO_MENU (Press enter to reboot ...)" {
         echo -e "\n    Rebooting ... "
         reboot
     }
 fi

+
+
+#special VTOY_DEFAULT_IMAGE process
+if [ -n "$VTOY_DEFAULT_IMAGE" ]; then
+    if regexp --set 1:vtHotkey --set 2:vtDefault "(F[2-9])>(.*)" "$VTOY_DEFAULT_IMAGE"; then
+    
+        set default="$vtDefault"
+        if [ -z "$VTOY_MENU_TIMEOUT" ]; then
+            set timeout=0
+        else
+            set timeout=$VTOY_MENU_TIMEOUT
+        fi
+        
+        export timeout
+        export default
+
+        vt_fn_mutex_lock 1
+
+        if [ "$vtHotkey" = "F2" ]; then
+            unset timeout
+            vt_browser_disk
+        elif [ "$vtHotkey" = "F4" ]; then
+            ventoy_localboot
+        elif [ "$vtHotkey" = "F5" ]; then
+            ventoy_diagnosis
+        elif [ "$vtHotkey" = "F6" ]; then
+            ventoy_ext_menu
+        fi
+        
+        vt_fn_mutex_lock 0
+        
+        unset timeout
+        unset default
+    fi    
+fi
+