1. Compile Environment\r
==========================================\r
My build environment is CentOS 7.8 x86_64. So here I first explain how to create the build environment from scratch.\r
- Because Ventoy is based on many open source projects, so the environment is important. I suggest you test it on a virtual machine firstly.\r
+ Ventoy is based on many open source projects, so the build environment is important. I suggest you first test it on a virtual machine.\r
\r
1.1 Install CentOS 7.8\r
I use CentOS-7-x86_64-Everything-2003.iso and select Minimal install\r
==========================================\r
2. Download Source Code\r
==========================================\r
-2.1 Download Ventoy source code from github and decompress it. \r
+2.1 Download Ventoy source code from GitHub and decompress it. \r
Next I assume that you have unzipped the code into the /home directory (check /home/Ventoy-master/README.md file for the directory layout).\r
\r
-2.2 Download third-part source code and tool\r
+2.2 Download third-party source code and tool\r
\r
https://www.fefe.de/dietlibc/dietlibc-0.34.tar.xz ===> /home/Ventoy-master/DOC/dietlibc-0.34.tar.xz\r
https://musl.libc.org/releases/musl-1.2.1.tar.gz ===> /home/Ventoy-master/DOC/musl-1.2.1.tar.gz\r
https://codeload.github.com/libfuse/libfuse/zip/fuse-2.9.9 ===> /home/Ventoy-master/ExFAT/libfuse-fuse-2.9.9.zip\r
https://releases.linaro.org/components/toolchain/binaries/7.4-2019.02/aarch64-linux-gnu/gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu.tar.xz ===> /opt/gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu.tar.xz\r
https://toolchains.bootlin.com/downloads/releases/toolchains/aarch64/tarballs/aarch64--uclibc--stable-2020.08-1.tar.bz2 ===> /opt/aarch64--uclibc--stable-2020.08-1.tar.bz2\r
- http://ftp.loongnix.cn/toolchain/gcc/release/mips/gcc7/mips-loongson-gcc7.3-2019.06-29-linux-gnu.tar.gz ===> /opt/mips-loongson-gcc7.3-2019.06-29-linux-gnu.tar.gz \r
+ https://github.com/ventoy/vtoytoolchain/releases/download/1.0/mips-loongson-gcc7.3-2019.06-29-linux-gnu.tar.gz ===> /opt/mips-loongson-gcc7.3-2019.06-29-linux-gnu.tar.gz\r
https://github.com/ventoy/musl-cross-make/releases/download/latest/output.tar.bz2 ===> /opt/output.tar.bz2\r
\r
\r
http://www.tinycorelinux.net/11.x/x86_64/release/distribution_files/corepure64.gz ===> /home/Ventoy-master/LiveCD/ISO/EFI/boot/corepure64.gz\r
http://www.tinycorelinux.net/11.x/x86_64/release/distribution_files/modules64.gz ===> /home/Ventoy-master/LiveCD/ISO/EFI/boot/modules64.gz \r
\r
-2.3 Prepare third-part tools\r
+2.3 Prepare third-party tools\r
cd /home/Ventoy-master/DOC/\r
tar xf musl-1.2.1.tar.gz\r
cd musl-1.2.1\r
==========================================\r
3. All in one script\r
==========================================\r
- I have made a all_in_one.sh, you can run this script to build and pack ventoy.\r
+ I have made an all-in-one script `all_in_one.sh`. You can run this script to build and pack ventoy.\r
If you want to compile a certain part separately, you can continue to refer to the later chapters of this text.\r
\r
cd /home/Ventoy-master/INSTALL\r
sh all_in_one.sh\r
\r
It should be noted that:\r
- 1. Only grub2/EDK2/IPXE will be recompiled in all_in_one.sh. Other part contains the binaries and are few modified, so will no be recompiled everytime.\r
+ 1. Only grub2/EDK2/IPXE will be recompiled in all_in_one.sh. Other parts contain binaries and are rarely modified, so will not be recompiled everytime.\r
You can rebuild these parts separately if you want.\r
\r
- 2. some part of Ventoy has 32bit&64bit version (like 4.9 4.10 4.11 follows)\r
- all_in_one.sh only build 64bit version of them, if you want to rebuild the 32bit verison. You should create a 32bit CentOS environment and build them.\r
- Fortunately these parts are few modified, you only need to build once or you can directly use the binary I have built.\r
+ 2. Some parts of Ventoy have a 32-bit and 64-bit version (like 4.9, 4.10, 4.11 follows)\r
+ all_in_one.sh only builds the 64bit version of them. If you want to rebuild the 32bit verison, you should create a 32-bit CentOS environment and build them.\r
+ Fortunately these parts are rarely modified, so you only need to build once or you can directly use the binaries I have built.\r
\r
- Besides, after a fully compile and pack, you can only build the part you modified (for example grub2) and run ventoy_pack.sh to generate the package.\r
+ Besides, after a full compile and packaging, you can only build the part you modified (for example grub2) and run ventoy_pack.sh to generate the package.\r
\r
==========================================\r
4. Build every part of Ventoy\r
After that, copy EXFAT/shared/mkexfatfs ===> /home/Ventoy-master/INSTALL/tool/mkexfatfs_64\r
After that, copy EXFAT/shared/mount.exfat-fuse ===> /home/Ventoy-master/INSTALL/tool/mount.exfat-fuse_64\r
\r
- Use the same build step to build exfat-util 32bit in a 32bit CentOS system and get mkexfatfs_32 and mount.exfat-fuse_32\r
+ Use the same build step to build exfat-util 32-bit in a 32-bit CentOS system and get mkexfatfs_32 and mount.exfat-fuse_32\r
\r
4.10 == Build vtoy_fuse_iso_64/vtoy_fuse_iso_32 ==\r
cd /home/Ventoy-master/FUSEISO\r
sh build_libfuse.sh\r
sh build.sh\r
\r
- Use the same build step to build in a 32bit CentOS system and get vtoy_fuse_iso_32\r
+ Use the same build step to build in a 32-bit CentOS system and get vtoy_fuse_iso_32\r
\r
4.11 == Build unsquashfs_64/unsquashfs_32 ==\r
cd /home/Ventoy-master/SQUASHFS/SRC\r
cd /home/Ventoy-master/SQUASHFS/squashfs-tools-4.4/squashfs-tools\r
sh build.sh\r
\r
- Use the same build step to build in a 32bit CentOS system and get unsquashfs_32\r
+ Use the same build step to build in a 32-bit CentOS system and get unsquashfs_32\r
\r
4.12 == Build vblade_64/vblade_32 ==\r
cd /home/Ventoy-master/VBLADE/vblade-master\r
projects / Ventoy.git / blobdiff