fi
}
+function ventoy_acpi_param {
+ if [ "$VTOY_PARAM_NO_ACPI" != "1" ]; then
+ vt_acpi_param $1 $2
+ fi
+}
+
function ventoy_power {
configfile $prefix/power.cfg
}
-function ventoy_diagnosis {
+function ventoy_diagnosis {
+ vt_enum_video_mode
configfile $prefix/debug.cfg
}
if [ -e (loop)/casper/initrd ]; then
vt_linux_specify_initrd_file /casper/initrd
fi
+ if [ -e (loop)/casper/initrd.gz ]; then
+ vt_linux_specify_initrd_file /casper/initrd.gz
+ fi
if [ -e (loop)/casper/initrd-oem ]; then
vt_linux_specify_initrd_file /casper/initrd-oem
fi
vt_linux_specify_initrd_file /pmagic/initrd.img
elif [ -e (loop)/boot/initrd.xz ]; then
vt_linux_specify_initrd_file /boot/initrd.xz
+ elif [ -e (loop)/boot/initrd.gz ]; then
+ vt_linux_specify_initrd_file /boot/initrd.gz
elif [ -f (loop)/boot/initrd ]; then
vt_linux_specify_initrd_file /boot/initrd
elif [ -f (loop)/boot/x86_64/loader/initrd ]; then
vt_linux_specify_initrd_file /boot/x86_64/loader/initrd
elif [ -f (loop)/boot/initramfs-x86_64.img ]; then
vt_linux_specify_initrd_file /boot/initramfs-x86_64.img
-
+ elif [ -f (loop)/boot/isolinux/initramfs_data64.cpio.gz ]; then
+ vt_linux_specify_initrd_file /boot/isolinux/initramfs_data64.cpio.gz
+
+ fi
+
+ if [ -f (loop)/isolinux/initrd.gz ]; then
+ vt_linux_specify_initrd_file /isolinux/initrd.gz
+ fi
+
+ if [ "$vt_chosen_size" = "1133375488" ]; then
+ if [ -d (loop)/boot/grub/x86_64-efi ]; then
+ vt_cpio_busybox64
+ fi
fi
}
vt_linux_specify_initrd_file /initrd
elif [ -f (loop)/live/initrd1 ]; then
vt_linux_specify_initrd_file /live/initrd1
-
+ elif [ -f (loop)/isolinux/initrd.img ]; then
+ vt_linux_specify_initrd_file /isolinux/initrd.img
+ elif [ -f (loop)/isolinux/initrd.gz ]; then
+ vt_linux_specify_initrd_file /isolinux/initrd.gz
+ elif [ -f (loop)/syslinux/kernel/initramfs.gz ]; then
+ vt_linux_specify_initrd_file /syslinux/kernel/initramfs.gz
+ elif vt_strstr $vt_volume_id "Daphile"; then
+ vt_linux_parse_initrd_isolinux (loop)/isolinux/
+ elif [ -f (loop)/boot/rootfs.xz ]; then
+ vt_linux_specify_initrd_file /boot/rootfs.xz
+ if [ "$grub_platform" != "pc" ]; then
+ vt_add_replace_file 0 "minimal\\x86_64\\rootfs.xz"
+ fi
+ elif [ -f (loop)/arch/boot/x86_64/archiso.img ]; then
+ vt_linux_specify_initrd_file /arch/boot/x86_64/archiso.img
+ if [ "$grub_platform" != "pc" ]; then
+ vt_add_replace_file 0 "EFI\\archiso\\archiso.img"
+ fi
+ elif [ -f (loop)/blackarch/boot/x86_64/archiso.img ]; then
+ vt_linux_specify_initrd_file /blackarch/boot/x86_64/archiso.img
fi
}
fi
}
+function ventoy_get_midnightbsd_ver {
+ set vt_freebsd_ver=11.x
+}
+
function ventoy_freebsd_proc {
+ set vtFreeBsdDistro=FreeBSD
+
if vt_strstr "$vt_volume_id" "GHOSTBSD"; then
ventoy_get_ghostbsd_ver $1 ${chosen_path}
elif vt_strstr "$vt_volume_id" "FREENAS"; then
set vt_freebsd_ver=10.x
elif regexp "^9_[0-9]" "$vt_volume_id"; then
set vt_freebsd_ver=9.x
+ elif [ -d (loop)/usr/midnightbsd-dist ]; then
+ ventoy_get_midnightbsd_ver $1 ${chosen_path}
+ set vtFreeBsdDistro=MidnightBSD
elif [ -e (loop)/bin/freebsd-version ]; then
vt_unix_parse_freebsd_ver (loop)/bin/freebsd-version vt_userland_ver
if regexp "\"13\.[0-9]-" "$vt_userland_ver"; then
fi
done
- vt_unix_replace_ko $vt_unix_mod_path (vtunix)/ventoy_unix/FreeBSD/geom_ventoy_ko/$vt_freebsd_ver/$vt_freebsd_bit/geom_ventoy.ko.xz
+ if [ -e (loop)/usr/freebsd-dist/cloninst.sh ]; then
+ set vtFreeBsdDistro=ClonOS
+ fi
+
+ vt_unix_replace_ko $vt_unix_mod_path (vtunix)/ventoy_unix/$vtFreeBsdDistro/geom_ventoy_ko/$vt_freebsd_ver/$vt_freebsd_bit/geom_ventoy.ko.xz
vt_unix_replace_conf FreeBSD ${1}${chosen_path}
}
ventoy_debug_pause
if [ -n "$vtoy_chain_mem_addr" ]; then
+ ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
ventoy_cli_console
chainloader ${vtoy_path}/ventoy_x64.efi env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
boot
}
function uefi_linux_menu_func {
+
if [ "$ventoy_compatible" = "NO" ]; then
if [ "$ventoy_fs_probe" = "udf" ]; then
distro_specify_initrd_file
vt_linux_initrd_count vtcount
+
if [ $vtcount -eq 0 ]; then
distro_specify_initrd_file_phase2
if [ -d (loop)/arch ]; then
if [ -f (loop)/arch/boot/x86_64/archiso.img ]; then
vt_add_replace_file $vtindex "EFI\\archiso\\archiso.img"
+ elif [ -f (loop)/arch/boot/x86_64/initramfs-linux.img ]; then
+ vt_add_replace_file $vtindex "arch\\boot\\x86_64\\initramfs-linux.img"
elif [ -f (loop)/boot/initramfs_x86_64.img ]; then
vt_add_replace_file $vtindex "boot\\initramfs_x86_64.img"
fi
+ elif [ -d (loop)/blackarch ]; then
+ if [ -f (loop)/blackarch/boot/x86_64/archiso.img ]; then
+ vt_add_replace_file $vtindex "EFI\\archiso\\archiso.img"
+ fi
+ elif [ -d (loop)/parabola ]; then
+ if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then
+ vt_add_replace_file $vtindex "EFI\\parabolaiso\\parabolaiso.img"
+ fi
elif [ -f (loop)/EFI/BOOT/initrd.gz ]; then
vt_add_replace_file $vtindex "EFI\\BOOT\\initrd.gz"
elif [ -f (loop)/loader/entries/thinstation.conf ]; then
vt_add_replace_file $vtindex "boot\\initrd"
+ elif [ -f (loop)/loader/entries/pisi-efi-x86_64.conf ]; then
+ vt_add_replace_file $vtindex "EFI\\pisi\\initrd.img"
fi
elif [ -d (loop)/EFI/boot/entries ]; then
if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then
elif [ -f (loop)/hyperbola/boot/x86_64/hyperiso.img ]; then
vt_add_replace_file 0 "EFI\\hyperiso\\hyperiso.img"
fi
+ elif [ -d (loop)/EFI/BOOT/entries ]; then
+ if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then
+ vt_add_replace_file 0 "EFI\\parabolaiso\\parabolaiso.img"
+ fi
elif [ -e (loop)/syslinux/alt0/full.cz ]; then
vt_add_replace_file 0 "EFI\\BOOT\\full.cz"
set FirstTryBootFile='@EFI@BOOT@grubx64.efi'
+
+
fi
fi
vt_linux_chain_data ${1}${chosen_path}
if [ -n "$vtoy_chain_mem_addr" ]; then
+ ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
ventoy_cli_console
chainloader ${vtoy_path}/ventoy_x64.efi env_param=${env_param} isoefi=${LoadIsoEfiDriver} FirstTry=${FirstTryBootFile} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
boot
ventoy_unix_comm_proc $1 ${chosen_path}
if [ -n "$vtoy_chain_mem_addr" ]; then
+ ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
ventoy_cli_console
chainloader ${vtoy_path}/ventoy_x64.efi env_param=${env_param} isoefi=${LoadIsoEfiDriver} FirstTry=${FirstTryBootFile} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
boot
elif vt_check_mode 1; then
set ventoy_compatible=YES
else
- vt_check_compatible (loop)
+ vt_check_compatible (loop)
fi
vt_img_sector ${1}${chosen_path}
ventoy_debug_pause
if [ -n "$vtoy_chain_mem_addr" ]; then
- linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} ibft mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+ ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
+ linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} ibft mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
boot
else
echo "chain empty failed"
vt_linux_initrd_count vtcount
if [ $vtcount -eq 0 ]; then
+ if [ -d (loop)/rancheros ]; then
+ vt_linux_parse_initrd_isolinux (loop)/boot/ /boot/isolinux/
+ fi
+
distro_specify_initrd_file_phase2
fi
ventoy_debug_pause
if [ -n "$vtoy_chain_mem_addr" ]; then
+ ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
boot
else
ventoy_unix_comm_proc $1 ${chosen_path}
if [ -n "$vtoy_chain_mem_addr" ]; then
+ #ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
boot
else
#special process for deepin-live iso
if [ "$vt_chosen_size" = "403701760" ]; then
- if vt_str_begin $vt_chosen_path "/deepin-live"; then
+ if vt_str_str $vt_chosen_path "/deepin-live"; then
set ventoy_busybox_ver=64
fi
+ elif vt_str_begin $vt_volume_id "PHOTON_"; then
+ set ventoy_busybox_ver=64
+ elif vt_str_begin $vt_volume_id "smgl-test-quinq-x86_64"; then
+ set ventoy_busybox_ver=64
+
fi
}
#special process for Endless OS
if vt_str_begin $vt_volume_id "Endless-OS"; then
iso_endless_os_proc $vtoy_iso_part $vt_chosen_path
+ elif vt_str_begin $vt_volume_id "TENS-Public"; then
+ set vtcompat=1
fi
if [ "$grub_platform" = "pc" ]; then
fi
}
+function miso_common_menuentry {
+ vt_chosen_img_path vt_chosen_path vt_chosen_size
+
+ echo "memdisk mode boot for $vt_chosen_path"
+ echo ""
+ ventoy_debug_pause
+
+ if [ "$grub_platform" = "pc" ]; then
+ legacy_iso_memdisk $vtoy_iso_part $vt_chosen_path
+ else
+ uefi_iso_memdisk $vtoy_iso_part $vt_chosen_path
+ fi
+}
+
+
function common_unsupport_menuentry {
echo -e "\n The name of the iso file could NOT contain space or non-ascii characters. \n"
echo -e " 文件名中不能有中文或空格 \n"
read vtInputKey
}
+function miso_unsupport_menuentry {
+ common_unsupport_menuentry
+}
+
function iso_unsupport_menuentry {
common_unsupport_menuentry
}
if [ -n "$vtoy_chain_mem_addr" ]; then
if [ "$grub_platform" = "pc" ]; then
- linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+ linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
else
ventoy_cli_console
chainloader ${vtoy_path}/ventoy_x64.efi env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
ventoy_debug_pause
- ventoy_cli_console
- chainloader ${vtoy_path}/ventoy_x64.efi memdisk env_param=${env_param} isoefi=on ${vtdebug_flag} mem:${vtoy_iso_buf_addr}:size:${vtoy_iso_buf_size}
+ ventoy_cli_console
+
+ unset vtoy_dotefi_retry
+ chainloader ${vtoy_path}/ventoy_x64.efi memdisk env_param=${env_param} dotefi isoefi=on ${vtdebug_flag} mem:${vtoy_iso_buf_addr}:size:${vtoy_iso_buf_size}
boot
+
+ if [ -n "$vtoy_dotefi_retry" ]; then
+ unset vtoy_dotefi_retry
+ chainloader ${vtoy_iso_part}${vt_chosen_path}
+ boot
+ fi
+
ventoy_gui_console
}
common_unsupport_menuentry
}
+function vhd_common_menuentry {
+
+ if [ "$VTOY_VHD_NO_WARNING" != "1" ]; then
+ if [ "$vtoy_iso_fs" != "ntfs" ]; then
+ echo -e "!!! WARNING !!!\n"
+ echo -e "\nPartition1 ($vtoy_iso_fs) is NOT ntfs, the VHD(x) file may not boot normally \n"
+ echo -e "\nVHD(x) 文件所在分区不是 ntfs 格式, 可能无法正常启动 \n\n"
+ echo -n "press ENTER to continue boot (请按 回车 键继续) ..."
+ read vtInputKey
+ fi
+ fi
+
+ vt_chosen_img_path vt_chosen_path vt_chosen_size
+ vt_patch_vhdboot $vt_chosen_path
+
+ ventoy_debug_pause
+
+ if [ -n "$vtoy_vhd_buf_addr" ]; then
+ if [ "$grub_platform" = "pc" ]; then
+ linux16 $vtoy_path/memdisk iso raw
+ initrd16 mem:${vtoy_vhd_buf_addr}:size:${vtoy_vhd_buf_size}
+ boot
+ else
+ ventoy_cli_console
+ chainloader ${vtoy_path}/ventoy_x64.efi memdisk env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_vhd_buf_addr}:size:${vtoy_vhd_buf_size}
+ boot
+ ventoy_gui_console
+ fi
+ else
+ echo "Please put the right ventoy_vhdboot.img file to the 1st partition"
+ ventoy_pause
+ fi
+}
+
+function vhd_unsupport_menuentry {
+ common_unsupport_menuentry
+}
+
+function vtoyboot_common_func {
+ set AltBootPart=0
+ set vtoysupport=0
+
+ vt_get_vtoy_type ${1} vtoytype parttype AltBootPart
+
+ if vt_str_begin $vtoytype vhd; then
+ set vtoysupport=1
+ elif [ "$vtoytype" = "raw" ]; then
+ set vtoysupport=1
+ elif [ "$vtoytype" = "vdi" ]; then
+ set vtoysupport=1
+ fi
+
+ if [ $vtoysupport -eq 1 ]; then
+ if [ "$grub_platform" = "pc" ]; then
+ if [ "$parttype" = "gpt" -a $AltBootPart -eq 0 ]; then
+ echo "The OS in the vdisk was created in UEFI mode, but current is Legacy BIOS mode."
+ echo "虚拟磁盘内的系统是在UEFI模式下创建的，而当前系统是Legacy BIOS模式，可能无法正常启动。"
+ ventoy_pause
+ fi
+ else
+ if [ "$parttype" = "mbr" -a $AltBootPart -eq 0 ]; then
+ echo "The OS in the vdisk was created in Legacy BIOS mode, but current is UEFI mode."
+ echo "虚拟磁盘内的系统是在Legacy BIOS模式下创建的，而当前系统是UEFI模式，可能无法正常启动。"
+ ventoy_pause
+ fi
+ fi
+
+ vt_img_sector ${1}
+ vt_raw_chain_data ${1}
+
+ ventoy_debug_pause
+
+ if [ -n "$vtoy_chain_mem_addr" ]; then
+ if [ "$grub_platform" = "pc" ]; then
+ vt_acpi_param ${vtoy_chain_mem_addr} 512
+ linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} sector512 mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+ boot
+ else
+ ventoy_acpi_param ${vtoy_chain_mem_addr} 512
+ ventoy_cli_console
+ chainloader ${vtoy_path}/ventoy_x64.efi sector512 env_param=${ventoy_env_param} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+ boot
+ ventoy_gui_console
+ fi
+ else
+ echo "chain empty failed!"
+ ventoy_pause
+ fi
+ else
+ echo "Unsupported vtoy type $vtoytype"
+ ventoy_pause
+ fi
+}
+
+function vtoy_common_menuentry {
+ vt_chosen_img_path vt_chosen_path vt_chosen_size
+ vtoyboot_common_func ${vtoy_iso_part}${vt_chosen_path}
+}
+
+function vtoy_unsupport_menuentry {
+ common_unsupport_menuentry
+}
+
#
#============================================================#
# IMG file boot process #
vt_unset_boot_opt
}
-function ventoy_img_fydeos {
+function ventoy_img_openelec {
+ elec_ver=$1
+
+ vt_load_cpio $vtoy_path/ventoy.cpio ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+ vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit
- set ventoy_busybox_ver=64
+ loopback vtloopex $vtoy_efi_part/ventoy/vtloopex.cpio
+ vt_img_extra_initrd_append (vtloopex)/$elec_ver/vtloopex.tar.xz
+ ventoy_debug_pause
+
+ #boot image file
+ vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=$elec_ver
+ vt_img_hook_root
+
+ set root=(vtimghd,1)
+ syslinux_configfile (vtimghd,1)/syslinux.cfg
+
+ vt_img_unhook_root
+ vt_unset_boot_opt
+ loopback -d vtloopex
+}
+
+
+function ventoy_img_freedombox {
vt_load_cpio $vtoy_path/ventoy.cpio ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit
+
+ vt_get_lib_module_ver (vtimghd,1) /lib/modules/ vt_module_ver
+ if [ -n "$vt_module_ver" ]; then
+ vt_img_extra_initrd_append (vtimghd,1)/lib/modules/$vt_module_ver/kernel/drivers/md/dm-mod.ko
+ fi
+
+ ventoy_debug_pause
+
+ #boot image file
+ vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=freedombox
+ vt_img_hook_root
- # loopback easysfs (vtimghd,1)/easy.sfs
- # vt_get_lib_module_ver (easysfs) /lib/modules/ vt_module_ver
+ configfile (vtimghd,1)/boot/grub/grub.cfg
- # if [ -n "$vt_module_ver" ]; then
- # for mod in "kernel/drivers/md/dm-mod.ko" "kernel/drivers/dax/dax.ko"; do
- # vt_img_extra_initrd_append (easysfs)/lib/modules/$vt_module_ver/$mod
- # done
- # fi
+ vt_img_unhook_root
+ vt_unset_boot_opt
+}
+
+function ventoy_img_paldo {
+ vt_load_cpio $vtoy_path/ventoy.cpio ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+ vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit
ventoy_debug_pause
#boot image file
- vt_set_boot_opt rdinit=/vtoy/vtoy
+ vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=paldo
+ vt_img_hook_root
+
+ vt_fs_enum_1st_file (vtimghd,1) /loader/entries/ vt_paldo_entry_conf
+ vt_file_basename $vt_paldo_entry_conf vtPaldoVer
+
+ echo loading file...
+ linux (vtimghd,1)/linux-${vtPaldoVer} root=/dev/ventoy1 rootfstype=vfat
+ initrd (vtimghd,1)/initramfs-${vtPaldoVer}
+ boot
+
+ vt_img_unhook_root
+ vt_unset_boot_opt
+}
+
+function ventoy_img_ubos {
+ vt_load_cpio $vtoy_path/ventoy.cpio ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+ vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit
+
+ vt_get_lib_module_ver (vtimghd,3) /lib/modules/ vt_module_ver
+ if [ -n "$vt_module_ver" ]; then
+ vt_img_extra_initrd_append (vtimghd,3)/lib/modules/$vt_module_ver/kernel/drivers/md/dm-mod.ko.xz
+ fi
+
+ ventoy_debug_pause
+
+ #boot image file
+ vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=ubos
vt_img_hook_root
- set root=(vtimghd,12)
- configfile (vtimghd,12)/efi/boot/grub.cfg
- #syslinux_configfile (vtimghd,12)/syslinux/syslinux.cfg
+ echo loading file...
+ linux (vtimghd,2)/vmlinuz-linux root=/dev/ventoy3 rw
+ initrd (vtimghd,2)/initramfs-linux.img
+ boot
+
+ vt_img_unhook_root
+ vt_unset_boot_opt
+}
+
+function ventoy_img_recalbox {
+ vt_load_cpio $vtoy_path/ventoy.cpio ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+ vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit
+
+ ventoy_debug_pause
+
+ #boot image file
+ vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=recalbox
+ vt_img_hook_root
+ set root=(vtimghd,1)
+ configfile (vtimghd,1)/boot/grub/grub.cfg
+
vt_img_unhook_root
vt_unset_boot_opt
}
+function ventoy_img_batocera {
+ vt_load_cpio $vtoy_path/ventoy.cpio ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+ vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit
+
+ ventoy_debug_pause
+
+ #boot image file
+ vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=batocera
+ vt_img_hook_root
+
+ set root=(vtimghd,1)
+ syslinux_configfile (vtimghd,1)/boot/syslinux/syslinux.cfg
+
+ vt_img_unhook_root
+ vt_unset_boot_opt
+}
+
+function ventoy_img_memtest86 {
+ chainloader (vtimghd,1)/efi/boot/BOOTX64.efi
+ boot
+}
+
+function img_unsupport_tip {
+ echo -e "\n This IMG file is NOT supported now. \n"
+ echo -e " 当前不支持启动此 IMG 文件 \n"
+ echo -e "\npress ENTER to exit (请按 回车 键返回) ..."
+ read vtInputKey
+}
function img_common_menuentry {
+ set ventoy_compatible=YES
set ventoy_busybox_ver=32
-
+
vt_chosen_img_path vt_chosen_path vt_chosen_size
if [ -d (vtimghd)/ ]; then
vt_img_extra_initrd_reset
+ vt_get_fs_label (vtimghd,1) vtImgHd1Label
+ if [ -d (vtimghd,2)/lib ]; then
+ vt_get_fs_label (vtimghd,2) vtImgHd2Label
+ fi
+
+ if [ -e (vtimghd,1)/etc/hostname ]; then
+ vt_1st_line (vtimghd,1)/etc/hostname vtImgHostname
+ fi
+
if [ -e (vtimghd,1)/easy.sfs ]; then
ventoy_img_easyos
elif [ -e (vtimghd,1)/volumio.initrd ]; then
ventoy_img_volumio
- elif [ -e (vtimghd,3)/etc/os-release ]; then
- if vt_file_strstr (vtimghd,3)/etc/os-release FydeOS; then
- ventoy_img_fydeos
+ elif vt_str_begin $vtImgHd1Label "LAKKA"; then
+ ventoy_img_openelec lakka
+ elif vt_str_begin $vtImgHd1Label "LIBREELEC"; then
+ ventoy_img_openelec LibreELEC
+ elif vt_str_begin $vtImgHd1Label "paldo-live"; then
+ ventoy_img_paldo
+ elif vt_str_begin $vtImgHostname "freedombox"; then
+ ventoy_img_freedombox
+ elif vt_str_begin $vtImgHd1Label "BATOCERA"; then
+ ventoy_img_batocera
+ elif [ "$vtImgHd2Label" = "RECALBOX" ]; then
+ ventoy_img_recalbox
+ elif [ -f (vtimghd,2)/loader/entries/ubos.conf ]; then
+ ventoy_img_ubos
+ elif [ -f (vtimghd,1)/efi/boot/mt86.png ]; then
+ if [ "$grub_platform" = "pc" ]; then
+ img_unsupport_tip
+ else
+ ventoy_img_memtest86
fi
-
else
- echo -e "\n This IMG file is NOT supported now. \n"
- echo -e " 当前不支持启动此 IMG 文件 \n"
- echo -e "\npress ENTER to exit (请按 回车 键返回) ..."
- read vtInputKey
+ vt_linux_chain_data ${vtoy_iso_part}${vt_chosen_path}
+ ventoy_acpi_param ${vtoy_chain_mem_addr} 512
+ if [ "$grub_platform" = "pc" ]; then
+ linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} sector512 mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+ boot
+ else
+ chainloader ${vtoy_path}/ventoy_x64.efi sector512 env_param=${env_param} isoefi=${LoadIsoEfiDriver} FirstTry=${FirstTryBootFile} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+ boot
+ fi
fi
set root=$vtback_root
vt_pop_last_entry
ventoy_gui_console
+ set ventoy_compatible=NO
}
function img_unsupport_menuentry {
#############################################################
#############################################################
-set VENTOY_VERSION="1.0.18"
+set VENTOY_VERSION="1.0.24"
+
+#ACPI not compatible with Window7/8, so disable by default
+set VTOY_PARAM_NO_ACPI=1
# Default menu display mode, you can change it as you want.
# 0: List mode
if [ "$vtoy_dev" = "tftp" ]; then
set vtoy_path=($root)
for vtid in 0 1 2 3; do
- if [ -d (hd$vtid,2)/ventoy ]; then
+ if [ -f (hd$vtid,2)/ventoy/ventoy.cpio ]; then
set vtoy_iso_part=(hd$vtid,1)
set vtoy_efi_part=(hd$vtid,2)
+ set vtoydev=hd$vtid
break
fi
done
set vtoy_path=($root)/ventoy
fi
+ set vtoydev=$vtoy_dev
set vtoy_iso_part=($vtoy_dev,1)
set vtoy_efi_part=($vtoy_dev,2)
loadfont unicode
set vt_plugin_path=$vtoy_iso_part
fi
+#Load Partition Table
+vt_load_part_table $vtoydev
#Load Plugin
if [ -f $vtoy_iso_part/ventoy/ventoy.json ]; then
vt_load_wimboot $vtoy_efi_part/ventoy/ventoy_wimboot.img
fi
+if [ -f $vtoy_iso_part/ventoy/ventoy_vhdboot.img ]; then
+ vt_load_vhdboot $vtoy_iso_part/ventoy/ventoy_vhdboot.img
+elif [ -f $vtoy_efi_part/ventoy/ventoy_vhdboot.img ]; then
+ vt_load_vhdboot $vtoy_efi_part/ventoy/ventoy_vhdboot.img
+fi
+
if [ $VTOY_DEFAULT_MENU_MODE -eq 0 ]; then
set VTOY_F3_CMD="vt_dynamic_menu 1 1"
- set VTOY_HOTKEY_TIP="F1:Memdisk F2:Power F3:TreeView F4:Localboot F5:Debug F6:ExMenu"
+ set VTOY_HOTKEY_TIP="F1:Memdisk F2:Power F3:TreeView F4:Localboot F5:Tools F6:ExMenu"
else
set VTOY_F3_CMD="vt_dynamic_menu 1 0"
- set VTOY_HOTKEY_TIP="F1:Memdisk F2:Power F3:ListView F4:Localboot F5:Debug F6:ExMenu"
+ set VTOY_HOTKEY_TIP="F1:Memdisk F2:Power F3:ListView F4:Localboot F5:Tools F6:ExMenu"
fi
if [ -n "$vtoy_gfxmode" ]; then
set gfxmode=$vtoy_gfxmode
+ set gfxpayload=keep
else
- set gfxmode=1920x1080,1366x768,1024x768
+ set gfxmode=1024x768
+ set gfxpayload=keep
fi
+
if [ "$vtoy_display_mode" = "CLI" ]; then
terminal_output console
elif [ "$vtoy_display_mode" = "serial" ]; then
#export necessary variable
export theme
export gfxmode
-export vtoy_dev
+export gfxpayload
+export vtoydev
+export vtoy_path
+export vtdebug_flag
export vtoy_iso_part
export vtoy_efi_part
export VENTOY_VERSION
-
-
+export VTOY_CUR_VIDEO_MODE
#colect all image files (iso files)
projects / Ventoy.git / blobdiff