function vt_check_compatible_pe {
#Check for PE without external tools
- if [ -f "$1/HBCD_PE.ini" ]; then
+ #set compatible if ISO file is less than 80MB
+ if [ $vt_chosen_size -gt 33554432 -a $vt_chosen_size -le 83886080 ]; then
set ventoy_compatible=YES
fi
+
+ return
}
function locate_initrd {
vt_windows_collect_wim_patch wim /BOOT/H3_7PE.WIM
vt_windows_collect_wim_patch wim /BOOT/H3_8PE.WIM
vt_windows_collect_wim_patch wim /BOOT/H3_81PE.WIM
- fi
+ elif [ -d (loop)/2k10/winpe ]; then
+ vt_windows_collect_wim_patch wim /2k10/winpe/w1086pe.wim
+ vt_windows_collect_wim_patch wim /2k10/winpe/w8x86pe.wim
+ vt_windows_collect_wim_patch wim /2k10/winpe/w7x86pe.wim
+ fi
}
function distro_specify_wim_patch_phase2 {
fi
}
+function uefi_find_replace_initrd {
+ if vt_get_efi_vdisk_offset "${1}${2}" vt_efivdisk_offset; then
+ loopback -s $vt_efivdisk_offset vtefivdisk "${1}${2}"
+
+ unset vt_rp_initrd
+ vt_search_replace_initrd (vtefivdisk) vt_rp_initrd
+
+ if [ -n "$vt_rp_initrd" ]; then
+ vt_add_replace_file $3 "$vt_rp_initrd"
+ fi
+
+ loopback -d vtefivdisk
+ ventoy_debug_pause
+ fi
+}
+
function uefi_linux_menu_func {
if [ "$ventoy_compatible" = "NO" ]; then
elif [ -f (loop)/loader/entries/pisi-efi-x86_64.conf ]; then
vt_add_replace_file $vtindex "EFI\\pisi\\initrd.img"
fi
+
+ vt_get_replace_file_cnt vt_replace_cnt
+ if [ $vt_replace_cnt -eq 0 ]; then
+ uefi_find_replace_initrd "$1" "$2" $vtindex
+ fi
elif [ -d (loop)/EFI/boot/entries ]; then
if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then
vt_add_replace_file 0 "EFI\\parabolaiso\\parabolaiso.img"
vt_add_replace_file 0 "EFI\\hyperiso\\hyperiso.img"
fi
elif [ -d (loop)/EFI/BOOT/entries ]; then
+ vt_linux_get_main_initrd_index vtindex
+
if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then
vt_add_replace_file 0 "EFI\\parabolaiso\\parabolaiso.img"
elif [ -f (loop)/parabola/boot/x86_64/initramfs-linux-libre.img ]; then
else
vt_iso9660_nojoliet 0
fi
+
+ vt_append_extra_sector 0
}
function uefi_iso_menu_func {
else
set ventoy_fs_probe=iso9660
ventoy_reset_nojoliet
+
+ # Lenovo EasyStartup need an addional sector for boundary check
+ if vt_str_begin "$vt_volume_id" "EasyStartup"; then
+ vt_skip_svd "${vtoy_iso_part}${vt_chosen_path}"
+ vt_append_extra_sector 1
+ fi
fi
loopback loop "${1}${chosen_path}"
loopback loop "$1$2"
fi
- for file in "boot/bcd" "/efi/microsoft/boot/bcd" "SSTR/BCD"; do
+ for file in "boot/bcd" "/efi/microsoft/boot/bcd" "SSTR/BCD" "boot/bce"; do
vt_windows_collect_wim_patch bcd (loop)/$file
done
set ventoy_fs_probe=iso9660
loopback loop "$1$2"
fi
+
+ if [ -f (loop)/isolinux/isolinux.cfg ]; then
+ if vt_iso9660_isjoliet; then
+ vt_iso9660_nojoliet 1
+ loopback -d loop
+ loopback loop "$1$2"
+ fi
+ fi
vt_load_cpio $vtoy_path "$2" "$1" "busybox=$ventoy_busybox_ver"
ventoy_pause
fi
fi
-
+
vt_img_sector "${1}"
vt_raw_chain_data "${1}"
#============================================================#
#
+function only_uefi_tip {
+ echo -e "\n This IMG file is only supported in UEFI mode. \n"
+ echo -e "\n press ENTER to exit ..."
+ read vtInputKey
+}
function ventoy_img_easyos {
vt_load_cpio $vtoy_path "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
set ventoy_busybox_ver=64
fi
- if [ ! -f ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz ]; then
- ventoy_gui_console
- echo -e "\n ventoy_openwrt.xz not found. Please refer https://www.ventoy.net/en/doc_openwrt.html.\n"
- echo -e " 未找到 ventoy_openwrt.xz 文件。请参考 https://www.ventoy.net/cn/doc_openwrt.html\n"
- echo -e "\n press ENTER to exit (请按 回车 键返回) ..."
- read vtInputKey
- ventoy_cli_console
- return
+ vt_fs_enum_1st_dir (vtimghd,2) /lib/modules/ vt_dir_name
+
+ if [ -f (vtimghd,2)/lib/modules/$vt_dir_name/dm-mod.ko ]; then
+ set openwrt_plugin_need=0
+ vt_img_extra_initrd_append (vtimghd,2)/lib/modules/$vt_dir_name/dm-mod.ko
+ if [ -f (vtimghd,2)/lib/modules/$vt_dir_name/dax.ko ]; then
+ vt_img_extra_initrd_append (vtimghd,2)/lib/modules/$vt_dir_name/dax.ko
+ fi
+ else
+ set openwrt_plugin_need=1
+ if [ ! -f ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz ]; then
+ ventoy_gui_console
+ echo -e "\n ventoy_openwrt.xz not found. Please refer https://www.ventoy.net/en/doc_openwrt.html.\n"
+ echo -e " 未找到 ventoy_openwrt.xz 文件。请参考 https://www.ventoy.net/cn/doc_openwrt.html\n"
+ echo -e "\n press ENTER to exit (请按 回车 键返回) ..."
+ read vtInputKey
+ ventoy_cli_console
+ return
+ fi
fi
if vt_img_check_range "${vtoy_iso_part}${vt_chosen_path}"; then
return
fi
-
vt_load_cpio $vtoy_path "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
- vt_img_extra_initrd_append ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz
-
+ if [ $openwrt_plugin_need -eq 1 ]; then
+ if [ -f ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz ]; then
+ vt_img_extra_initrd_append ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz
+ fi
+ fi
#boot image file
vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=openwrt
vt_unset_boot_opt
}
+function ventoy_img_fydeos {
+ if [ "$grub_platform" = "pc" ]; then
+ only_uefi_tip
+ return
+ fi
+
+ vt_load_cpio $vtoy_path "${vt_chosen_path}" ${vtoy_iso_part} "busybox=64"
+ vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+
+ ventoy_debug_pause
+
+ #boot image file
+ vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=fydeos
+ vt_img_hook_root
+
+ set grubdisk=vtimghd
+ set grubpartA=(vtimghd,3)
+ set grubpartB=(vtimghd,5)
+ set linuxpartA=(sda,3)
+ set linuxpartB=(sda,5)
+
+ set root=(vtimghd,12)
+ configfile (vtimghd,12)/efi/boot/grub.cfg
+
+ vt_img_unhook_root
+ vt_unset_boot_opt
+
+ unset grubdisk
+ unset grubpartA
+ unset grubpartB
+ unset linuxpartA
+ unset linuxpartB
+}
+
+function ventoy_img_cloudready {
+ if [ "$grub_platform" = "pc" ]; then
+ only_uefi_tip
+ return
+ fi
+
+ vt_load_cpio $vtoy_path "${vt_chosen_path}" ${vtoy_iso_part} "busybox=64"
+ vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+
+ ventoy_debug_pause
+
+ #boot image file
+ vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=cloudready
+ vt_img_hook_root
+
+ set grubdisk=vtimghd
+ set grubpartA=(vtimghd,3)
+ set grubpartB=(vtimghd,5)
+ set linuxpartA=(sda,3)
+ set linuxpartB=(sda,5)
+
+ set root=(vtimghd,12)
+ configfile (vtimghd,12)/efi/boot/grub.cfg
+
+ vt_img_unhook_root
+ vt_unset_boot_opt
+
+ unset grubdisk
+ unset grubpartA
+ unset grubpartB
+ unset linuxpartA
+ unset linuxpartB
+}
+
function ventoy_img_memtest86 {
chainloader (vtimghd,1)/efi/boot/BOOTX64.efi
boot
read vtInputKey
}
+function legacy_img_memdisk {
+ linux16 $vtoy_path/memdisk
+ echo "Loading img file to memory ..."
+ initrd16 "${1}${2}"
+
+ ventoy_cli_console
+ boot
+}
+
function img_common_menuentry {
set ventoy_compatible=YES
set ventoy_busybox_ver=32
+ unset LoadIsoEfiDriver
vt_chosen_img_path vt_chosen_path vt_chosen_size
return
fi
- if [ -d (vtimghd)/ ]; then
- loopback -d vtimghd
+ if [ "$grub_platform" = "pc" ]; then
+ if vt_check_mode 0; then
+ legacy_img_memdisk $vtoy_iso_part "$vt_chosen_path"
+ return
+ fi
fi
loopback vtimghd "${vtoy_iso_part}${vt_chosen_path}"
vt_get_fs_label (vtimghd,1) vtImgHd1Label
- if [ -d (vtimghd,2)/lib ]; then
+
+ if [ "$vtImgHd1Label" = "STATE" ]; then
+ vt_get_fs_label (vtimghd,3) vtImgHd3Label
+ elif [ -d (vtimghd,2)/lib ]; then
vt_get_fs_label (vtimghd,2) vtImgHd2Label
fi
-
+
if [ -e (vtimghd,1)/etc/hostname ]; then
vt_1st_line (vtimghd,1)/etc/hostname vtImgHostname
fi
-
-
- if [ -e (vtimghd,1)/easy.sfs ]; then
- ventoy_img_easyos
- elif [ -e (vtimghd,1)/volumio.initrd ]; then
- ventoy_img_volumio
+
+ if vt_str_begin "$vtImgHd3Label" "ROOT-"; then
+ if [ -f (vtimghd,3)/etc/os-release.d/ID ]; then
+ vt_1st_line (vtimghd,3)/etc/os-release.d/ID vt_release_line1
+ if [ vt_str_begin "$vt_release_line1" "FydeOS" ]; then
+ ventoy_img_fydeos
+ fi
+ elif [ -f (vtimghd,3)/etc/cloudready-release ]; then
+ ventoy_img_cloudready
+ fi
elif vt_str_begin "$vtImgHd1Label" "LAKKA"; then
ventoy_img_openelec lakka
elif vt_str_begin "$vtImgHd1Label" "LIBREELEC"; then
ventoy_img_tails
elif [ "$vtImgHd2Label" = "RECALBOX" ]; then
ventoy_img_recalbox
+ elif [ -e (vtimghd,1)/easy.sfs ]; then
+ ventoy_img_easyos
+ elif [ -e (vtimghd,1)/volumio.initrd ]; then
+ ventoy_img_volumio
elif [ -f (vtimghd,2)/loader/entries/ubos.conf ]; then
ventoy_img_ubos
elif [ -f (vtimghd,2)/etc/openwrt_version ]; then
img_unsupport_tip
else
ventoy_img_memtest86
- fi
+ fi
else
vt_linux_chain_data "${vtoy_iso_part}${vt_chosen_path}"
ventoy_acpi_param ${vtoy_chain_mem_addr} 512
fi
fi
+ loopback -d vtimghd
+
set root=$vtback_root
vt_pop_last_entry
set theme=$vtback_theme
#############################################################
#############################################################
-set VENTOY_VERSION="1.0.44"
+set VENTOY_VERSION="1.0.51"
#ACPI not compatible with Window7/8, so disable by default
set VTOY_PARAM_NO_ACPI=1
#Load Plugin
if [ -f $vtoy_iso_part/ventoy/ventoy.json ]; then
- clear
- vt_load_plugin $vtoy_iso_part
- clear
+ clear
+ vt_load_plugin $vtoy_iso_part
+ clear
+else
+ vt_check_json_path_case $vtoy_iso_part
fi
if [ -n "$VTOY_MENU_TIMEOUT" ]; then
terminal_output serial console
else
if [ -n "$vtoy_theme" ]; then
- set theme=$vtoy_theme
+ vt_set_theme
else
set theme=$prefix/themes/ventoy/theme.txt
fi
set_keyboard_layout "$VTOY_DEFAULT_KBD_LAYOUT"
fi
+if [ -n "$VTOY_PLUGIN_PATH_CASE_MISMATCH" ]; then
+ clear
+ echo "$VTOY_PLUGIN_PATH_CASE_MISMATCH"
+ echo -e "\n\nPath case does not match! ventoy directory and ventoy.json MUST be all lowercase!"
+ echo -e "\n路径大小写不匹配！ventoy 目录和 ventoy.json 文件的名字必须是全部小写，请修正！"
+ echo -e "\n\npress ENTER to continue (请按回车键继续) ..."
+ read vtInputKey
+fi
+
if [ -n "$VTOY_PLUGIN_SYNTAX_ERROR" ]; then
clear
echo -e "\n Syntax error detected in ventoy.json, please check! \n"
export VENTOY_VERSION
export VTOY_CUR_VIDEO_MODE
export VTOY_EFI_ARCH
+export VTOY_MEM_DISK_STR
+export VTOY_ISO_RAW_STR
+export VTOY_GRUB2_MODE_STR
+export VTOY_WIMBOOT_MODE_STR
+export VTOY_ISO_UEFI_DRV_STR
+
#special VTOY_DEFAULT_IMAGE process
if [ -n "$VTOY_DEFAULT_IMAGE" ]; then
projects / Ventoy.git / blobdiff