update

[Ventoy.git] / INSTALL / tool / VentoyWorker.sh

diff --git a/INSTALL/tool/VentoyWorker.sh b/INSTALL/tool/VentoyWorker.sh
index 099b2d553d8a61977aed45b97539b069abee97f6..ac61997cdc8e3c15f0ef83a500795015594eaf77 100644 (file)
--- a/INSTALL/tool/VentoyWorker.sh
+++ b/INSTALL/tool/VentoyWorker.sh
@@ -3,18 +3,18 @@
 . ./tool/ventoy_lib.sh
 
 print_usage() {
+    
     echo 'Usage:  Ventoy2Disk.sh CMD [ OPTION ] /dev/sdX'
     echo '  CMD:'
     echo '   -i  install ventoy to sdX (fail if disk already installed with ventoy)'
-    echo '   -u  update ventoy in sdX'
     echo '   -I  force install ventoy to sdX (no matter installed or not)'
+    echo '   -u  update ventoy in sdX'
     echo ''
     echo '  OPTION: (optional)'
     echo '   -r SIZE_MB  preserve some space at the bottom of the disk (only for install)'
     echo '   -s          enable secure boot support (default is disabled)'
     echo '   -g          use GPT partition style, default is MBR (only for install)'
     echo ''
-    
 }
 
 RESERVE_SIZE_MB=0
@@ -34,6 +34,11 @@ while [ -n "$1" ]; do
         RESERVE_SPACE="YES"
         shift
         RESERVE_SIZE_MB=$1
+    elif [ "$1" = "-V" ] || [ "$1" = "--version" ]; then
+        exit 0
+    elif [ "$1" == "-h" ] || [ "$1" = "--help" ]; then
+        print_usage
+        exit 0
     else
         if ! [ -b "$1" ]; then
             vterr "$1 is NOT a valid device"
@@ -117,7 +122,7 @@ if [ "$MODE" = "install" ]; then
         if parted -v > /dev/null 2>&1; then
             PARTTOOL='parted'
         else
-            vterr "parted is not found in the sysstem, Ventoy can't create new partition."
+            vterr "parted is not found in the system, Ventoy can't create new partition."
             exit 1
         fi
     else
@@ -126,7 +131,7 @@ if [ "$MODE" = "install" ]; then
         elif fdisk -v >/dev/null 2>&1; then
             PARTTOOL='fdisk'
         else
-            vterr "Both parted and fdisk are not found in the sysstem, Ventoy can't create new partition."
+            vterr "Both parted and fdisk are not found in the system, Ventoy can't create new partition."
             exit 1
         fi
     fi
@@ -145,7 +150,7 @@ if [ "$MODE" = "install" ]; then
     disk_sector_num=$(cat /sys/block/${DISK#/dev/}/size)
     disk_size_gb=$(expr $disk_sector_num / 2097152)
 
-    if [ $disk_sector_num -gt 4294967296 ]; then
+    if [ $disk_sector_num -gt 4294967296 ] && [ -z "$VTGPT" ]; then
         vterr "$DISK is over 2TB size, MBR will not work on it."
         exit 1
     fi
@@ -181,7 +186,7 @@ if [ "$MODE" = "install" ]; then
     vtwarn "All the data on the disk $DISK will be lost!!!"
     echo ""
 
-    read -p 'Continue? (y/n)'  Answer
+    read -p 'Continue? (y/n) '  Answer
     if [ "$Answer" != "y" ]; then
         if [ "$Answer" != "Y" ]; then
             exit 0
@@ -190,7 +195,7 @@ if [ "$MODE" = "install" ]; then
 
     echo ""
     vtwarn "All the data on the disk $DISK will be lost!!!"
-    read -p 'Double-check. Continue? (y/n)'  Answer
+    read -p 'Double-check. Continue? (y/n) '  Answer
     if [ "$Answer" != "y" ]; then
         if [ "$Answer" != "Y" ]; then
             exit 0
@@ -223,7 +228,9 @@ if [ "$MODE" = "install" ]; then
         cmd=./tool/mkexfatfs_32
     fi
 
-    chmod +x ./tool/*
+    if [ -d ./tool/ ]; then 
+        chmod +x -R ./tool/
+    fi
 
     # DiskSize > 32GB  Cluster Size use 128KB
     # DiskSize < 32GB  Cluster Size use 32KB
@@ -235,8 +242,6 @@ if [ "$MODE" = "install" ]; then
 
     $cmd -n ventoy -s $cluster_sectors ${DISK}1
 
-    chmod +x ./tool/vtoy_gen_uuid
-
     vtinfo "writing data to disk ..."
     
     dd status=none conv=fsync if=./boot/boot.img of=$DISK bs=1 count=446
@@ -327,22 +332,28 @@ else
     SHORT_PART2=${PART2#/dev/}
     part2_start=$(cat /sys/class/block/$SHORT_PART2/start)
     
-    dd status=none conv=fsync if=./boot/boot.img of=$DISK bs=1 count=440
+    PART1_TYPE=$(dd if=$DISK bs=1 count=1 skip=450 status=none | ./tool/hexdump -n1 -e  '1/1 "%02X"')
     
-    PART1_ACTIVE=$(dd if=$DISK bs=1 count=1 skip=446 status=none | ./tool/hexdump -n1 -e  '1/1 "%02X"')
-    PART2_ACTIVE=$(dd if=$DISK bs=1 count=1 skip=462 status=none | ./tool/hexdump -n1 -e  '1/1 "%02X"')
+    if [ "$PART1_TYPE" = "EE" ]; then
+        vtdebug "This is GPT partition style ..."        
+        ./tool/xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2014 seek=34
+        echo -en '\x23' | dd of=$DISK conv=fsync bs=1 count=1 seek=17908 status=none
+    else
+        vtdebug "This is MBR partition style ..."
+        dd status=none conv=fsync if=./boot/boot.img of=$DISK bs=1 count=440
     
-    vtdebug "PART1_ACTIVE=$PART1_ACTIVE  PART2_ACTIVE=$PART2_ACTIVE"
-    if [ "$PART1_ACTIVE" = "00" ] && [ "$PART2_ACTIVE" = "80" ]; then
-        vtdebug "change 1st partition active, 2nd partition inactive ..."
-        echo -en '\x80' | dd of=$DISK conv=fsync bs=1 count=1 seek=446 status=none
-        echo -en '\x00' | dd of=$DISK conv=fsync bs=1 count=1 seek=462 status=none
+        PART1_ACTIVE=$(dd if=$DISK bs=1 count=1 skip=446 status=none | ./tool/hexdump -n1 -e  '1/1 "%02X"')
+        PART2_ACTIVE=$(dd if=$DISK bs=1 count=1 skip=462 status=none | ./tool/hexdump -n1 -e  '1/1 "%02X"')
+        
+        vtdebug "PART1_ACTIVE=$PART1_ACTIVE  PART2_ACTIVE=$PART2_ACTIVE"
+        if [ "$PART1_ACTIVE" = "00" ] && [ "$PART2_ACTIVE" = "80" ]; then
+            vtdebug "change 1st partition active, 2nd partition inactive ..."
+            echo -en '\x80' | dd of=$DISK conv=fsync bs=1 count=1 seek=446 status=none
+            echo -en '\x00' | dd of=$DISK conv=fsync bs=1 count=1 seek=462 status=none
+        fi
+        ./tool/xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2047 seek=1
     fi
 
-
-    ./tool/xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2047 seek=1
-
-
     ./tool/xzcat ./ventoy/ventoy.disk.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=$VENTOY_SECTOR_NUM seek=$part2_start
 
     sync