vt_linux_specify_initrd_file /antiX/initrd.gz
elif [ -f (loop)/360Disk/initrd.gz ]; then
vt_linux_specify_initrd_file /360Disk/initrd.gz
+ elif [ -f (loop)/porteus/initrd.xz ]; then
+ vt_linux_specify_initrd_file /porteus/initrd.xz
fi
}
function ventoy_get_ghostbsd_ver {
-
- # vt_parse_iso_create_date "$1/${chosen_path}" vt_create_date
- # if regexp "^202005" "$vt_create_date"; then
- # set vt_freebsd_ver=12.x
- # fi
-
- set vt_freebsd_ver=12.x
+ # fallback to parse version from elf /boot/kernel/kernel
+ set vt_freebsd_ver=xx
}
function ventoy_get_furybsd_ver {
}
function ventoy_get_midnightbsd_ver {
- set vt_freebsd_ver=11.x
+ if vt_str_begin "$vt_volume_id" "1_"; then
+ set vt_freebsd_ver=11.x
+ elif vt_str_begin "$vt_volume_id" "2_"; then
+ set vt_freebsd_ver=2.x
+ elif vt_str_begin "$vt_volume_id" "3_"; then
+ set vt_freebsd_ver=3.x
+ fi
}
function ventoy_freebsd_proc {
set vtFreeBsdDistro=FreeBSD
+ set vt_freebsd_ver=xx
if vt_strstr "$vt_volume_id" "GHOSTBSD"; then
ventoy_get_ghostbsd_ver "$1" "${chosen_path}"
fi
elif vt_strstr "${chosen_path}" "MidnightBSD"; then
set vt_freebsd_ver=9.x
- else
- set vt_freebsd_ver=12.x
+ fi
+
+
+ if [ -e (loop)/usr/freebsd-dist/cloninst.sh ]; then
+ set vtFreeBsdDistro=ClonOS
fi
set vt_freebsd_bit=64
fi
break
fi
- done
+ done
+
+ if [ "$vt_freebsd_ver" = "xx" ]; then
+ if [ -e (loop)/boot/kernel/kernel ]; then
+ vt_unix_parse_freebsd_ver_elf (loop)/boot/kernel/kernel $vt_freebsd_bit vt_freebsd_ver
+ fi
+
+ if [ "$vt_freebsd_ver" = "xx" ]; then
+ set vt_freebsd_ver=13.x
+ fi
+ fi
if [ -n "${vtdebug_flag}" ]; then
- echo "This is FreeBSD $vt_freebsd_ver ${vt_freebsd_bit}bit"
+ echo "This is $vtFreeBsdDistro $vt_freebsd_ver ${vt_freebsd_bit}bit"
fi
unset vt_unix_mod_path
fi
done
- if [ -e (loop)/usr/freebsd-dist/cloninst.sh ]; then
- set vtFreeBsdDistro=ClonOS
- fi
-
vt_unix_replace_ko $vt_unix_mod_path (vtunix)/ventoy_unix/$vtFreeBsdDistro/geom_ventoy_ko/$vt_freebsd_ver/$vt_freebsd_bit/geom_ventoy.ko.xz
vt_unix_replace_conf FreeBSD "${1}${chosen_path}"
}
if [ -n "$vtoy_chain_mem_addr" ]; then
ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
ventoy_cli_console
-
- if [ "$VTOY_EFI_ARCH" != "mips" ]; then
- chainloader ${vtoy_path}/ventoy_${VTOY_EFI_ARCH}.efi fallback env_param=${env_param} isoefi=${LoadIsoEfiDriver} FirstTry=${FirstTryBootFile} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
- boot
+
+ if vt_check_mode 3; then
+ ventoy_debug_pause
+ else
+ if [ "$VTOY_EFI_ARCH" != "mips" ]; then
+ chainloader ${vtoy_path}/ventoy_${VTOY_EFI_ARCH}.efi fallback env_param=${env_param} isoefi=${LoadIsoEfiDriver} FirstTry=${FirstTryBootFile} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+ boot
+ fi
fi
# fallback
ventoy_debug_pause
if [ -n "$vtoy_chain_mem_addr" ]; then
- ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
- linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
- boot
+ if vt_check_mode 3; then
+ ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
+ ventoy_cli_console
+
+ # fallback
+ set vtback_root=$root
+ vt_push_last_entry
+ set vtback_theme=$theme
+ unset theme
+
+ vt_trailer_cpio "$vtoy_iso_part" "$vt_chosen_path" noinit
+ vt_set_boot_opt rdinit=/vtoy/vtoy
+
+ set root=(loop)
+ set vtback_cfg_find=0
+ for cfg in "/boot/grub/grub.cfg" "/EFI/BOOT/grub.cfg" "/EFI/debian/grub.cfg" "EFI/boot/grub.cfg" "efi/boot/grub.cfg" "/grub/grub.cfg" "EFI/BOOT/BOOTX64.conf"; do
+ if [ -e "$cfg" ]; then
+ set vtback_cfg_find=1
+ configfile "$cfg"
+ break
+ fi
+ done
+
+ vt_unset_boot_opt
+ set root=$vtback_root
+ set theme=$vtback_theme
+ vt_pop_last_entry
+ ventoy_gui_console
+ else
+ ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
+ linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+ boot
+ fi
else
echo "chain empty failed"
ventoy_pause
vt_parse_iso_volume "${vtoy_iso_part}${vt_chosen_path}" vt_system_id vt_volume_id vt_volume_space
if [ $vt_volume_space -ne $vt_chosen_size ]; then
vt_mod $vt_chosen_size 2048 vt_chosen_size_mod
- if [ $vt_volume_space -gt $vt_chosen_size -o $vt_chosen_size_mod -ne 0 ]; then
+ if [ $vt_chosen_size_mod -ne 0 ]; then
echo -e "\n $vt_volume_space $vt_chosen_size $vt_chosen_size_mod\n"
echo -e "\n The size of the iso file \"$vt_chosen_size\" is invalid. File corrupted ?\n"
echo -e " 此ISO文件的大小 \"$vt_chosen_size\" 有问题，请确认文件是否损坏。\n"
vt_unset_boot_opt
}
+function ventoy_img_openwrt {
+ if [ -e (vtimghd,2)/lib64 ]; then
+ set ventoy_busybox_ver=64
+ fi
+
+ if [ ! -f ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz ]; then
+ ventoy_gui_console
+ echo -e "\n ventoy_openwrt.xz not found. Please refer https://www.ventoy.net/en/doc_openwrt.html.\n"
+ echo -e " 未找到 ventoy_openwrt.xz 文件。请参考 https://www.ventoy.net/cn/doc_openwrt.html\n"
+ echo -e "\n press ENTER to exit (请按 回车 键返回) ..."
+ read vtInputKey
+ ventoy_cli_console
+ return
+ fi
+
+ if vt_img_check_range "${vtoy_iso_part}${vt_chosen_path}"; then
+ ventoy_debug_pause
+ else
+ ventoy_gui_console
+ echo -e "\n IMG file need processed. Please refer https://www.ventoy.net/en/doc_openwrt.html.\n"
+ echo -e " 此 IMG 文件必须处理之后才能支持。请参考 https://www.ventoy.net/cn/doc_openwrt.html\n"
+ echo -e "\n press ENTER to exit (请按 回车 键返回) ..."
+ read vtInputKey
+ ventoy_cli_console
+ return
+ fi
+
+
+ vt_load_cpio $vtoy_path "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+ vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+
+ vt_img_extra_initrd_append ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz
+
+
+ #boot image file
+ vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=openwrt
+ vt_img_hook_root
+
+ set root=(vtimghd,1)
+ configfile (vtimghd,1)/boot/grub/grub.cfg
+
+ vt_img_unhook_root
+ vt_unset_boot_opt
+}
+
+function ventoy_img_tails {
+ vt_load_cpio $vtoy_path "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+ vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+
+ ventoy_debug_pause
+
+ #boot image file
+ vt_set_boot_opt rdinit=/vtoy/vtoy live-media=/dev/dm-1 ventoyos=tails
+ vt_img_hook_root
+
+ set root=(vtimghd,1)
+ configfile (vtimghd,1)/efi/debian/grub.cfg
+
+ vt_img_unhook_root
+ vt_unset_boot_opt
+}
+
function ventoy_img_memtest86 {
chainloader (vtimghd,1)/efi/boot/BOOTX64.efi
boot
set vtback_root=$root
ventoy_cli_console
vt_push_last_entry
+ set vtback_theme=$theme
+ unset theme
vt_img_extra_initrd_reset
+
vt_get_fs_label (vtimghd,1) vtImgHd1Label
- if [ -d (vtimghd,2)/lib ]; then
+ if [ -d (vtimghd,2)/lib ]; then
vt_get_fs_label (vtimghd,2) vtImgHd2Label
fi
vt_1st_line (vtimghd,1)/etc/hostname vtImgHostname
fi
+
if [ -e (vtimghd,1)/easy.sfs ]; then
ventoy_img_easyos
elif [ -e (vtimghd,1)/volumio.initrd ]; then
ventoy_img_freedombox
elif vt_str_begin "$vtImgHd1Label" "BATOCERA"; then
ventoy_img_batocera
+ elif vt_str_begin "$vtImgHd1Label" "Tails"; then
+ ventoy_img_tails
elif [ "$vtImgHd2Label" = "RECALBOX" ]; then
ventoy_img_recalbox
elif [ -f (vtimghd,2)/loader/entries/ubos.conf ]; then
ventoy_img_ubos
+ elif [ -f (vtimghd,2)/etc/openwrt_version ]; then
+ ventoy_img_openwrt
elif [ -f (vtimghd,1)/efi/boot/mt86.png ]; then
if [ "$grub_platform" = "pc" ]; then
img_unsupport_tip
set root=$vtback_root
vt_pop_last_entry
+ set theme=$vtback_theme
ventoy_gui_console
set ventoy_compatible=NO
}
#############################################################
#############################################################
-set VENTOY_VERSION="1.0.36"
+set VENTOY_VERSION="1.0.41"
#ACPI not compatible with Window7/8, so disable by default
set VTOY_PARAM_NO_ACPI=1
set VTOY_MEM_DISK_STR="[Memdisk]"
set VTOY_ISO_RAW_STR="Compatible Mode"
+set VTOY_GRUB2_MODE_STR="GRUB2 Mode"
set VTOY_ISO_UEFI_DRV_STR="UEFI FS"
set VTOY_F2_CMD="ventoy_power"
terminal_output gfxterm
fi
+if [ -n "$VTOY_DEFAULT_KBD_LAYOUT" ]; then
+ set_keyboard_layout "$VTOY_DEFAULT_KBD_LAYOUT"
+fi
if [ -n "$VTOY_PLUGIN_SYNTAX_ERROR" ]; then
clear
fi
done
+#clear all input key before show main menu
+vt_clear_key
#export necessary variable
export theme
export vtoydev
export vtoy_path
export vtdebug_flag
+export vtoy_iso_fs
export vtoy_iso_part
export vtoy_efi_part
export VENTOY_VERSION
projects / Ventoy.git / blobdiff