Update help information

[Ventoy.git] / INSTALL / grub / grub.cfg

diff --git a/INSTALL/grub/grub.cfg b/INSTALL/grub/grub.cfg
index f57a20c979ba779d85123697a5b0266a27f7bd86..188fdefb6ecea17878578d3c2a2eca84dfc9d61f 100644 (file)
--- a/INSTALL/grub/grub.cfg
+++ b/INSTALL/grub/grub.cfg
@@ -90,6 +90,28 @@ function ventoy_ext_menu {
     fi
 }
 
     fi
 }
 

+function ventoy_checksum {
+    if [ -f "${vtoy_iso_part}${VTOY_CHKSUM_FILE_PATH}" ]; then
+        configfile $prefix/checksum.cfg
+    fi
+}
+
+function ventoy_show_help {
+    if [ -f $prefix/help.tar.gz ]; then
+        if [ -z "$vtoy_help_txt_mem_addr" ]; then
+            vt_load_file_to_mem "auto" $prefix/help.tar.gz vtoy_help_txt_mem
+        fi
+
+        loopback vt_help_tarfs mem:${vtoy_help_txt_mem_addr}:size:${vtoy_help_txt_mem_size}
+        if [ -f "(vt_help_tarfs)/help/${VTOY_HELP_TXT_LANGUAGE}.txt" ]; then
+            cat "(vt_help_tarfs)/help/${VTOY_HELP_TXT_LANGUAGE}.txt"
+        else
+            cat "(vt_help_tarfs)/help/en_US.txt"
+        fi        
+        loopback -d vt_help_tarfs
+    fi
+}
+

 function get_os_type {
     set vtoy_os=Linux
     
 function get_os_type {
     set vtoy_os=Linux
     


@@ -130,9 +152,22 @@ function get_os_type {
 
 function vt_check_compatible_pe {
     #Check for PE without external tools
 
 function vt_check_compatible_pe {
     #Check for PE without external tools

-    if [ -f "$1/HBCD_PE.ini" ]; then
+    #set compatible if ISO file is less than 80MB
+    if [ $vt_chosen_size -gt 33554432 -a $vt_chosen_size -le 83886080 ]; then
+        set ventoy_compatible=YES
+    elif [ -e $1/WEPE/WEPE.INI ]; then
+        set ventoy_compatible=YES
+    fi
+
+    return
+}
+
+function vt_check_compatible_linux {
+    if vt_str_begin "$vt_volume_id" "embootkit"; then

         set ventoy_compatible=YES
     fi
         set ventoy_compatible=YES
     fi

+
+    return

 }
 
 function locate_initrd {
 }
 
 function locate_initrd {


@@ -161,7 +196,11 @@ function distro_specify_wim_patch {
         vt_windows_collect_wim_patch wim /BOOT/H3_7PE.WIM
         vt_windows_collect_wim_patch wim /BOOT/H3_8PE.WIM
         vt_windows_collect_wim_patch wim /BOOT/H3_81PE.WIM
         vt_windows_collect_wim_patch wim /BOOT/H3_7PE.WIM
         vt_windows_collect_wim_patch wim /BOOT/H3_8PE.WIM
         vt_windows_collect_wim_patch wim /BOOT/H3_81PE.WIM

-    fi
+    elif [ -d (loop)/2k10/winpe ]; then
+        vt_windows_collect_wim_patch wim /2k10/winpe/w1086pe.wim
+        vt_windows_collect_wim_patch wim /2k10/winpe/w8x86pe.wim
+        vt_windows_collect_wim_patch wim /2k10/winpe/w7x86pe.wim
+    fi  

 }
 
 function distro_specify_wim_patch_phase2 {
 }
 
 function distro_specify_wim_patch_phase2 {


@@ -208,7 +247,8 @@ function distro_specify_initrd_file {
         vt_linux_specify_initrd_file /boot/initramfs-x86_64.img
     elif [ -f (loop)/boot/isolinux/initramfs_data64.cpio.gz ]; then 
         vt_linux_specify_initrd_file /boot/isolinux/initramfs_data64.cpio.gz
         vt_linux_specify_initrd_file /boot/initramfs-x86_64.img
     elif [ -f (loop)/boot/isolinux/initramfs_data64.cpio.gz ]; then 
         vt_linux_specify_initrd_file /boot/isolinux/initramfs_data64.cpio.gz

-
+    elif [ -f (loop)/boot/initrd.img ]; then 
+        vt_linux_specify_initrd_file /boot/initrd.img

         
     fi
     
         
     fi
     


@@ -313,6 +353,8 @@ function distro_specify_initrd_file_phase2 {
         vt_linux_specify_initrd_file /360Disk/initrd.gz
     elif [ -f (loop)/porteus/initrd.xz ]; then
         vt_linux_specify_initrd_file /porteus/initrd.xz
         vt_linux_specify_initrd_file /360Disk/initrd.gz
     elif [ -f (loop)/porteus/initrd.xz ]; then
         vt_linux_specify_initrd_file /porteus/initrd.xz

+    elif [ -f (loop)/pyabr/boot/initrfs.img ]; then
+        vt_linux_specify_initrd_file /pyabr/boot/initrfs.img

     
     fi
 }
     
     fi
 }


@@ -535,6 +577,10 @@ function uefi_windows_menu_func {
     vt_windows_chain_data "${1}${chosen_path}"
     ventoy_debug_pause
     
     vt_windows_chain_data "${1}${chosen_path}"
     ventoy_debug_pause
     

+    if vt_check_mode 4; then
+        vtoy_windows_wimboot_func
+    fi
+    

     if [ -n "$vtoy_chain_mem_addr" ]; then
         ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
         ventoy_cli_console
     if [ -n "$vtoy_chain_mem_addr" ]; then
         ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
         ventoy_cli_console


@@ -546,6 +592,22 @@ function uefi_windows_menu_func {
     fi
 }
 
     fi
 }
 

+function uefi_find_replace_initrd {
+    if vt_get_efi_vdisk_offset "${1}${2}" vt_efivdisk_offset; then
+        loopback -s $vt_efivdisk_offset vtefivdisk "${1}${2}"
+        
+        unset vt_rp_initrd
+        vt_search_replace_initrd (vtefivdisk) vt_rp_initrd
+        
+        if [ -n "$vt_rp_initrd" ]; then
+            vt_add_replace_file $3 "$vt_rp_initrd"
+        fi
+
+        loopback -d vtefivdisk
+        ventoy_debug_pause
+    fi
+}
+

 function uefi_linux_menu_func {
     
     if [ "$ventoy_compatible" = "NO" ]; then    
 function uefi_linux_menu_func {
     
     if [ "$ventoy_compatible" = "NO" ]; then    


@@ -627,6 +689,11 @@ function uefi_linux_menu_func {
             elif [ -f (loop)/loader/entries/pisi-efi-x86_64.conf ]; then
                 vt_add_replace_file $vtindex "EFI\\pisi\\initrd.img"
             fi
             elif [ -f (loop)/loader/entries/pisi-efi-x86_64.conf ]; then
                 vt_add_replace_file $vtindex "EFI\\pisi\\initrd.img"
             fi

+
+            vt_get_replace_file_cnt vt_replace_cnt
+            if [ $vt_replace_cnt -eq 0 ]; then
+                uefi_find_replace_initrd "$1" "$2" $vtindex
+            fi

         elif [ -d (loop)/EFI/boot/entries ]; then
             if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then
                 vt_add_replace_file 0 "EFI\\parabolaiso\\parabolaiso.img"
         elif [ -d (loop)/EFI/boot/entries ]; then
             if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then
                 vt_add_replace_file 0 "EFI\\parabolaiso\\parabolaiso.img"


@@ -634,6 +701,8 @@ function uefi_linux_menu_func {
                 vt_add_replace_file 0 "EFI\\hyperiso\\hyperiso.img"
             fi
         elif [ -d (loop)/EFI/BOOT/entries ]; then
                 vt_add_replace_file 0 "EFI\\hyperiso\\hyperiso.img"
             fi
         elif [ -d (loop)/EFI/BOOT/entries ]; then

+            vt_linux_get_main_initrd_index vtindex
+

             if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then
                 vt_add_replace_file 0 "EFI\\parabolaiso\\parabolaiso.img"
             elif [ -f (loop)/parabola/boot/x86_64/initramfs-linux-libre.img ]; then
             if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then
                 vt_add_replace_file 0 "EFI\\parabolaiso\\parabolaiso.img"
             elif [ -f (loop)/parabola/boot/x86_64/initramfs-linux-libre.img ]; then


@@ -727,6 +796,8 @@ function ventoy_reset_nojoliet {
     else
         vt_iso9660_nojoliet 0
     fi
     else
         vt_iso9660_nojoliet 0
     fi

+    
+    vt_append_extra_sector 0

 }
 
 function uefi_iso_menu_func {
 }
 
 function uefi_iso_menu_func {


@@ -753,6 +824,12 @@ function uefi_iso_menu_func {
     else
         set ventoy_fs_probe=iso9660
         ventoy_reset_nojoliet
     else
         set ventoy_fs_probe=iso9660
         ventoy_reset_nojoliet

+
+        # Lenovo EasyStartup need an addional sector for boundary check
+        if vt_str_begin "$vt_volume_id" "EasyStartup"; then
+            vt_skip_svd "${vtoy_iso_part}${vt_chosen_path}"
+            vt_append_extra_sector 1
+        fi

     fi
 
     loopback loop "${1}${chosen_path}"
     fi
 
     loopback loop "${1}${chosen_path}"


@@ -787,6 +864,7 @@ function uefi_iso_menu_func {
     elif [ "$vtoy_os" = "Unix" ]; then
         uefi_unix_menu_func "$1" "${chosen_path}"
     else
     elif [ "$vtoy_os" = "Unix" ]; then
         uefi_unix_menu_func "$1" "${chosen_path}"
     else

+        vt_check_compatible_linux (loop)

         uefi_linux_menu_func  "$1" "${chosen_path}"
     fi
 
         uefi_linux_menu_func  "$1" "${chosen_path}"
     fi
 


@@ -805,23 +883,84 @@ function uefi_iso_memdisk {
 }
 
 
 }
 
 

-function legacy_windows_wimboot_func {
-    set wimbootfile=(loop)/sources/boot.wim
-    set wimbit=64
+function vtoy_windows_wimboot_func {
+    if [ -f (loop)/x86/sources/boot.wim -a -f (loop)/x64/sources/boot.wim ]; then
+        vt_sel_wimboot vtoy_wimboot_bit
+        if [ "$vtoy_wimboot_bit" = "32" ]; then
+            set vtoy_wimboot_prefix=(loop)/x86
+        else
+            set vtoy_wimboot_prefix=(loop)/x64
+        fi
+    else
+        set vtoy_wimboot_prefix=(loop)
+        if vt_is_pe64 $vtoy_wimboot_prefix/setup.exe; then
+            set vtoy_wimboot_bit=64
+        else
+            set vtoy_wimboot_bit=32
+        fi
+    fi

 
 

-    vt_windows_wimboot_data
+    if [ -n "${vtdebug_flag}" ]; then
+        echo vtoy_wimboot_prefix=$vtoy_wimboot_prefix vtoy_wimboot_bit=$vtoy_wimboot_bit
+    fi

 
 

-    linux16  $vtoy_efi_part/ventoy/wimboot quiet
-    ventoy_debug_pause
+    for wmfile in sources/boot.wim boot/bcd boot/boot.sdi; do
+        if [ ! -f $vtoy_wimboot_prefix/$wmfile ]; then
+            return
+        fi
+    done
+
+    if [ -f $vtoy_wimboot_prefix/sources/install.wim -o -f $vtoy_wimboot_prefix/sources/install.esd ]; then
+        vt_windows_wimboot_data
+    else
+        return
+    fi

     
     

-    echo Loading files...... (This may take a few minutes, please wait.)
-    initrd16 newc:vtoyjump.exe:$vtoy_efi_part/ventoy/vtoyjump${wimbit}.exe \
-         newc:wimboot.data:mem:${vtoy_wimboot_mem_addr}:size:${vtoy_wimboot_mem_size} \
-         newc:winpeshl.ini:$vtoy_efi_part/ventoy/winpeshl.ini \
-         newc:bcd:(loop)/boot/bcd \
-         newc:boot.sdi:(loop)/boot/boot.sdi \
-         newc:boot.wim:$wimbootfile
-    boot
+    if [ "$grub_platform" = "pc" ]; then
+        set vt_wimkernel=wimboot.x86_64.xz
+        
+        linux16  "$vtoy_path/$vt_wimkernel"  quiet
+        ventoy_debug_pause
+
+        vt_set_wim_load_prompt 1 "Loading files......"
+        initrd16 newc:vtoyjump.exe:$vtoy_path/vtoyjump${vtoy_wimboot_bit}.exe \
+             newc:wimboot.data:mem:${vtoy_wimboot_mem_addr}:size:${vtoy_wimboot_mem_size} \
+             newc:winpeshl.ini:mem:${vtoy_winpeshl_ini_addr}:size:${vtoy_winpeshl_ini_size} \
+             newc:bcd:$vtoy_wimboot_prefix/boot/bcd \
+             newc:boot.sdi:$vtoy_wimboot_prefix/boot/boot.sdi \
+             newc:boot.wim:$vtoy_wimboot_prefix/sources/boot.wim
+        vt_set_wim_load_prompt 0
+        boot
+    else
+        if [ "$grub_cpu" = "i386" ]; then
+            set vt_wimkernel=wimboot.i386.efi.xz
+        else
+            set vt_wimkernel=wimboot.x86_64.xz
+        fi
+
+        vt_set_wim_load_prompt 1 "Loading files......"
+        vt_load_file_to_mem "nodecompress" $vtoy_wimboot_prefix/sources/boot.wim vtoy_wimfile_mem
+        vt_set_wim_load_prompt 0
+
+        if [ $? -eq 0 ]; then
+            set vtoy_wimfile_path=mem:${vtoy_wimfile_mem_addr}:size:${vtoy_wimfile_mem_size}
+        else
+            set vtoy_wimfile_path=$vtoy_wimboot_prefix/sources/boot.wim
+        fi
+
+        ventoy_cli_console
+        chainloader "$vtoy_path/$vt_wimkernel" quiet \
+            "vf=wimboot.data:mem:${vtoy_wimboot_mem_addr}:size:${vtoy_wimboot_mem_size}" \
+            "vf=winpeshl.ini:mem:${vtoy_winpeshl_ini_addr}:size:${vtoy_winpeshl_ini_size}" \
+            "vf=vtoyjump.exe:$vtoy_path/vtoyjump${vtoy_wimboot_bit}.exe" \
+            "vf=bcd:$vtoy_wimboot_prefix/boot/bcd" \
+            "vf=boot.sdi:$vtoy_wimboot_prefix/boot/boot.sdi" \
+            "vf=boot.wim:$vtoy_wimfile_path" \
+            pfsize=$vtoy_chain_file_size  \
+            pfread=$vtoy_chain_file_read
+        boot
+        ventoy_gui_console
+    fi

 }
 
 function legacy_windows_menu_func {
 }
 
 function legacy_windows_menu_func {


@@ -835,7 +974,7 @@ function legacy_windows_menu_func {
             loopback loop "$1$2"
         fi
         
             loopback loop "$1$2"
         fi
         

-        for file in "boot/bcd" "/efi/microsoft/boot/bcd" "SSTR/BCD"; do
+        for file in "boot/bcd" "/efi/microsoft/boot/bcd" "SSTR/BCD" "boot/bce"; do

             vt_windows_collect_wim_patch bcd (loop)/$file                
         done
         
             vt_windows_collect_wim_patch bcd (loop)/$file                
         done
         


@@ -854,7 +993,7 @@ function legacy_windows_menu_func {
     ventoy_debug_pause    
 
     if vt_check_mode 4; then
     ventoy_debug_pause    
 
     if vt_check_mode 4; then

-        legacy_windows_wimboot_func
+        vtoy_windows_wimboot_func

     fi
 
     if [ -n "$vtoy_chain_mem_addr" ]; then
     fi
 
     if [ -n "$vtoy_chain_mem_addr" ]; then


@@ -875,6 +1014,14 @@ function legacy_linux_menu_func {
             set ventoy_fs_probe=iso9660
             loopback loop "$1$2"
         fi
             set ventoy_fs_probe=iso9660
             loopback loop "$1$2"
         fi

+
+        if [ -f (loop)/isolinux/isolinux.cfg ]; then
+            if vt_iso9660_isjoliet; then
+                vt_iso9660_nojoliet 1
+                loopback -d loop
+                loopback loop "$1$2"
+            fi
+        fi

     
         vt_load_cpio  $vtoy_path  "$2" "$1" "busybox=$ventoy_busybox_ver"
 
     
         vt_load_cpio  $vtoy_path  "$2" "$1" "busybox=$ventoy_busybox_ver"
 


@@ -955,7 +1102,7 @@ function legacy_linux_menu_func {
             ventoy_gui_console
         else
             ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
             ventoy_gui_console
         else
             ventoy_acpi_param ${vtoy_chain_mem_addr} 2048

-            linux16   $vtoy_path/ipxe.krn ${vtdebug_flag}  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+            linux16   $vtoy_path/ipxe.krn ${vtdebug_flag}  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}            

             boot
         fi
     else
             boot
         fi
     else


@@ -1022,6 +1169,7 @@ function legacy_iso_menu_func {
     elif [ "$vtoy_os" = "Unix" ]; then
         legacy_unix_menu_func "$1" "${chosen_path}"
     else
     elif [ "$vtoy_os" = "Unix" ]; then
         legacy_unix_menu_func "$1" "${chosen_path}"
     else

+        vt_check_compatible_linux (loop)

         legacy_linux_menu_func  "$1" "${chosen_path}"
     fi
 }
         legacy_linux_menu_func  "$1" "${chosen_path}"
     fi
 }


@@ -1104,9 +1252,8 @@ function iso_common_menuentry {
             echo -e "\n $vt_volume_space $vt_chosen_size $vt_chosen_size_mod\n"
             echo -e "\n The size of the iso file \"$vt_chosen_size\" is invalid. File corrupted ?\n"
             echo -e " 此ISO文件的大小 \"$vt_chosen_size\" 有问题，请确认文件是否损坏。\n"
             echo -e "\n $vt_volume_space $vt_chosen_size $vt_chosen_size_mod\n"
             echo -e "\n The size of the iso file \"$vt_chosen_size\" is invalid. File corrupted ?\n"
             echo -e " 此ISO文件的大小 \"$vt_chosen_size\" 有问题，请确认文件是否损坏。\n"

-            echo -e "\n press ENTER to exit (请按 回车 键返回) ..."
+            echo -e "\n press ENTER to continue (请按 回车 键继续) ..."

             read vtInputKey
             read vtInputKey

-            return

         fi
     fi
     
         fi
     fi
     


@@ -1334,7 +1481,7 @@ function vtoyboot_common_func {
                 ventoy_pause
             fi
         fi
                 ventoy_pause
             fi
         fi

-    
+

         vt_img_sector "${1}"
         vt_raw_chain_data "${1}"
 
         vt_img_sector "${1}"
         vt_raw_chain_data "${1}"
 


@@ -1388,6 +1535,11 @@ function vtoy_unsupport_menuentry {
 #============================================================#
 #
 
 #============================================================#
 #
 

+function only_uefi_tip {
+    echo -e "\n This IMG file is only supported in UEFI mode. \n"
+    echo -e "\n press ENTER to exit ..."
+    read vtInputKey 
+}

 
 function ventoy_img_easyos {
     vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
 
 function ventoy_img_easyos {
     vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"


@@ -1539,6 +1691,23 @@ function ventoy_img_recalbox {
     vt_unset_boot_opt
 }
 
     vt_unset_boot_opt
 }
 

+function ventoy_img_esysrescue {
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=esysrescue
+    vt_img_hook_root
+
+    set root=(vtimghd,1)
+    configfile (vtimghd,1)/boot/grub/grub.cfg
+
+    vt_img_unhook_root
+    vt_unset_boot_opt
+}
+

 function ventoy_img_batocera {
     vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
     vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
 function ventoy_img_batocera {
     vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
     vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit


@@ -1561,14 +1730,25 @@ function ventoy_img_openwrt {
         set ventoy_busybox_ver=64
     fi
 
         set ventoy_busybox_ver=64
     fi
 

-    if [ ! -f ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz ]; then
-        ventoy_gui_console
-        echo -e "\n ventoy_openwrt.xz not found. Please refer https://www.ventoy.net/en/doc_openwrt.html.\n"
-        echo -e " 未找到 ventoy_openwrt.xz 文件。请参考 https://www.ventoy.net/cn/doc_openwrt.html\n"
-        echo -e "\n press ENTER to exit (请按 回车 键返回) ..."
-        read vtInputKey
-        ventoy_cli_console
-        return
+    vt_fs_enum_1st_dir (vtimghd,2) /lib/modules/ vt_dir_name
+
+    if [ -f (vtimghd,2)/lib/modules/$vt_dir_name/dm-mod.ko ]; then
+        set openwrt_plugin_need=0
+        vt_img_extra_initrd_append  (vtimghd,2)/lib/modules/$vt_dir_name/dm-mod.ko
+        if [ -f (vtimghd,2)/lib/modules/$vt_dir_name/dax.ko ]; then
+            vt_img_extra_initrd_append  (vtimghd,2)/lib/modules/$vt_dir_name/dax.ko
+        fi
+    else
+        set openwrt_plugin_need=1
+        if [ ! -f ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz ]; then
+            ventoy_gui_console
+            echo -e "\n ventoy_openwrt.xz not found. Please refer https://www.ventoy.net/en/doc_openwrt.html.\n"
+            echo -e " 未找到 ventoy_openwrt.xz 文件。请参考 https://www.ventoy.net/cn/doc_openwrt.html\n"
+            echo -e "\n press ENTER to exit (请按 回车 键返回) ..."
+            read vtInputKey
+            ventoy_cli_console
+            return
+        fi

     fi
 
     if vt_img_check_range "${vtoy_iso_part}${vt_chosen_path}"; then
     fi
 
     if vt_img_check_range "${vtoy_iso_part}${vt_chosen_path}"; then


@@ -1583,12 +1763,14 @@ function ventoy_img_openwrt {
         return
     fi
     
         return
     fi
     

-

     vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
     vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
 
     vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
     vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
 

-    vt_img_extra_initrd_append  ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz
-    
+    if [ $openwrt_plugin_need -eq 1 ]; then
+        if [ -f ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz ]; then
+            vt_img_extra_initrd_append  ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz
+        fi
+    fi

 
     #boot image file
     vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=openwrt
 
     #boot image file
     vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=openwrt


@@ -1618,6 +1800,74 @@ function ventoy_img_tails {
     vt_unset_boot_opt
 }
 
     vt_unset_boot_opt
 }
 

+function ventoy_img_fydeos {
+    if [ "$grub_platform" = "pc" ]; then
+        only_uefi_tip
+        return
+    fi
+
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=64"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=fydeos
+    vt_img_hook_root
+
+    set grubdisk=vtimghd
+    set grubpartA=(vtimghd,3)
+    set grubpartB=(vtimghd,5)
+    set linuxpartA=(sda,3)
+    set linuxpartB=(sda,5)
+
+    set root=(vtimghd,12)
+    configfile (vtimghd,12)/efi/boot/grub.cfg
+
+    vt_img_unhook_root
+    vt_unset_boot_opt
+    
+    unset grubdisk
+    unset grubpartA
+    unset grubpartB
+    unset linuxpartA
+    unset linuxpartB
+}
+
+function ventoy_img_cloudready {
+    if [ "$grub_platform" = "pc" ]; then
+        only_uefi_tip
+        return
+    fi
+
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=64"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=cloudready
+    vt_img_hook_root
+
+    set grubdisk=vtimghd
+    set grubpartA=(vtimghd,3)
+    set grubpartB=(vtimghd,5)
+    set linuxpartA=(sda,3)
+    set linuxpartB=(sda,5)
+
+    set root=(vtimghd,12)    
+    configfile (vtimghd,12)/efi/boot/grub.cfg
+
+    vt_img_unhook_root
+    vt_unset_boot_opt
+    
+    unset grubdisk
+    unset grubpartA
+    unset grubpartB
+    unset linuxpartA
+    unset linuxpartB
+}
+

 function ventoy_img_memtest86 {      
     chainloader (vtimghd,1)/efi/boot/BOOTX64.efi
     boot
 function ventoy_img_memtest86 {      
     chainloader (vtimghd,1)/efi/boot/BOOTX64.efi
     boot


@@ -1630,9 +1880,19 @@ function img_unsupport_tip {
     read vtInputKey 
 }
 
     read vtInputKey 
 }
 

+function legacy_img_memdisk {
+    linux16   $vtoy_path/memdisk
+    echo "Loading img file to memory ..."
+    initrd16  "${1}${2}"
+    
+    ventoy_cli_console
+    boot
+}
+

 function img_common_menuentry {
     set ventoy_compatible=YES
     set ventoy_busybox_ver=32
 function img_common_menuentry {
     set ventoy_compatible=YES
     set ventoy_busybox_ver=32

+    unset LoadIsoEfiDriver

 
     vt_chosen_img_path vt_chosen_path vt_chosen_size
     
 
     vt_chosen_img_path vt_chosen_path vt_chosen_size
     


@@ -1644,8 +1904,11 @@ function img_common_menuentry {
         return
     fi
 
         return
     fi
 

-    if [ -d (vtimghd)/ ]; then
-        loopback -d vtimghd
+    if [ "$grub_platform" = "pc" ]; then
+        if vt_check_mode 0; then
+            legacy_img_memdisk $vtoy_iso_part "$vt_chosen_path"
+            return
+        fi

     fi
 
     loopback vtimghd "${vtoy_iso_part}${vt_chosen_path}"
     fi
 
     loopback vtimghd "${vtoy_iso_part}${vt_chosen_path}"


@@ -1663,19 +1926,26 @@ function img_common_menuentry {
 
 
     vt_get_fs_label (vtimghd,1) vtImgHd1Label
 
 
     vt_get_fs_label (vtimghd,1) vtImgHd1Label

-    if [ -d (vtimghd,2)/lib ]; then        
+
+    if [ "$vtImgHd1Label" = "STATE" ]; then
+        vt_get_fs_label (vtimghd,3) vtImgHd3Label
+    elif [ -d (vtimghd,2)/lib ]; then

         vt_get_fs_label (vtimghd,2) vtImgHd2Label
     fi
         vt_get_fs_label (vtimghd,2) vtImgHd2Label
     fi

-    
+

     if [ -e (vtimghd,1)/etc/hostname ]; then
         vt_1st_line (vtimghd,1)/etc/hostname vtImgHostname
     fi
     if [ -e (vtimghd,1)/etc/hostname ]; then
         vt_1st_line (vtimghd,1)/etc/hostname vtImgHostname
     fi

-    
-    
-    if [ -e (vtimghd,1)/easy.sfs ]; then
-        ventoy_img_easyos
-    elif [ -e (vtimghd,1)/volumio.initrd ]; then
-        ventoy_img_volumio
+
+    if vt_str_begin "$vtImgHd3Label" "ROOT-"; then
+        if [ -f (vtimghd,3)/etc/os-release.d/ID ]; then 
+            vt_1st_line (vtimghd,3)/etc/os-release.d/ID vt_release_line1
+            if [ vt_str_begin "$vt_release_line1" "FydeOS" ]; then
+                ventoy_img_fydeos
+            fi
+        elif [ -f (vtimghd,3)/etc/cloudready-release ]; then
+            ventoy_img_cloudready
+        fi

     elif vt_str_begin "$vtImgHd1Label" "LAKKA"; then
         ventoy_img_openelec lakka
     elif vt_str_begin "$vtImgHd1Label" "LIBREELEC"; then
     elif vt_str_begin "$vtImgHd1Label" "LAKKA"; then
         ventoy_img_openelec lakka
     elif vt_str_begin "$vtImgHd1Label" "LIBREELEC"; then


@@ -1690,6 +1960,12 @@ function img_common_menuentry {
         ventoy_img_tails
     elif [ "$vtImgHd2Label" = "RECALBOX" ]; then
         ventoy_img_recalbox
         ventoy_img_tails
     elif [ "$vtImgHd2Label" = "RECALBOX" ]; then
         ventoy_img_recalbox

+    elif [ "$vtImgHd1Label" = "ESYSRESCUE" ]; then
+        ventoy_img_esysrescue
+    elif [ -e (vtimghd,1)/easy.sfs ]; then
+        ventoy_img_easyos
+    elif [ -e (vtimghd,1)/volumio.initrd ]; then
+        ventoy_img_volumio

     elif [ -f (vtimghd,2)/loader/entries/ubos.conf ]; then
         ventoy_img_ubos
     elif [ -f (vtimghd,2)/etc/openwrt_version ]; then
     elif [ -f (vtimghd,2)/loader/entries/ubos.conf ]; then
         ventoy_img_ubos
     elif [ -f (vtimghd,2)/etc/openwrt_version ]; then


@@ -1699,7 +1975,7 @@ function img_common_menuentry {
             img_unsupport_tip
         else
             ventoy_img_memtest86            
             img_unsupport_tip
         else
             ventoy_img_memtest86            

-        fi
+        fi    

     else
         vt_linux_chain_data "${vtoy_iso_part}${vt_chosen_path}"
         ventoy_acpi_param ${vtoy_chain_mem_addr} 512
     else
         vt_linux_chain_data "${vtoy_iso_part}${vt_chosen_path}"
         ventoy_acpi_param ${vtoy_chain_mem_addr} 512


@@ -1712,6 +1988,8 @@ function img_common_menuentry {
         fi
     fi
 
         fi
     fi
 

+    loopback -d vtimghd
+

     set root=$vtback_root
     vt_pop_last_entry
     set theme=$vtback_theme
     set root=$vtback_root
     vt_pop_last_entry
     set theme=$vtback_theme


@@ -1731,7 +2009,7 @@ function img_unsupport_menuentry {
 #############################################################
 #############################################################
 
 #############################################################
 #############################################################
 

-set VENTOY_VERSION="1.0.43"
+set VENTOY_VERSION="1.0.56"

 
 #ACPI not compatible with Window7/8, so disable by default
 set VTOY_PARAM_NO_ACPI=1
 
 #ACPI not compatible with Window7/8, so disable by default
 set VTOY_PARAM_NO_ACPI=1


@@ -1751,6 +2029,11 @@ set VTOY_F2_CMD="ventoy_power"
 set VTOY_F4_CMD="ventoy_localboot"
 set VTOY_F5_CMD="ventoy_diagnosis"
 set VTOY_F6_CMD="ventoy_ext_menu"
 set VTOY_F4_CMD="ventoy_localboot"
 set VTOY_F5_CMD="ventoy_diagnosis"
 set VTOY_F6_CMD="ventoy_ext_menu"

+set VTOY_HELP_CMD="ventoy_show_help"
+set VTOY_CHKSUM_CMD="ventoy_checksum"
+set VTOY_HELP_TXT_LANGUAGE="en_US"
+set VTOY_CHKSUM_FILE_PATH="X"
+

 
 if [ "$grub_platform" = "pc" ]; then
     set VTOY_TEXT_MENU_VER="Ventoy $VENTOY_VERSION BIOS  www.ventoy.net"
 
 if [ "$grub_platform" = "pc" ]; then
     set VTOY_TEXT_MENU_VER="Ventoy $VENTOY_VERSION BIOS  www.ventoy.net"


@@ -1800,7 +2083,10 @@ else
     set vtoydev=$vtoy_dev
     set vtoy_iso_part=($vtoy_dev,1)
     set vtoy_efi_part=($vtoy_dev,2)
     set vtoydev=$vtoy_dev
     set vtoy_iso_part=($vtoy_dev,1)
     set vtoy_efi_part=($vtoy_dev,2)

-    loadfont unicode
+    
+    vt_load_file_to_mem "auto" $prefix/fonts/unicode.pf2 vtoy_font_mem
+    loadfont mem:${vtoy_font_mem_addr}:size:${vtoy_font_mem_size}
+

     set vt_plugin_path=$vtoy_iso_part
 fi
 
     set vt_plugin_path=$vtoy_iso_part
 fi
 


@@ -1809,9 +2095,11 @@ vt_load_part_table $vtoydev
 
 #Load Plugin
 if [ -f $vtoy_iso_part/ventoy/ventoy.json ]; then
 
 #Load Plugin
 if [ -f $vtoy_iso_part/ventoy/ventoy.json ]; then

-   clear
-   vt_load_plugin $vtoy_iso_part
-   clear
+    clear
+    vt_load_plugin $vtoy_iso_part
+    clear
+else
+    vt_check_json_path_case $vtoy_iso_part

 fi
 
 if [ -n "$VTOY_MENU_TIMEOUT" ]; then
 fi
 
 if [ -n "$VTOY_MENU_TIMEOUT" ]; then


@@ -1835,10 +2123,10 @@ fi
 
 if [ $VTOY_DEFAULT_MENU_MODE -eq 0 ]; then
     set VTOY_F3_CMD="vt_dynamic_menu 1 1"
 
 if [ $VTOY_DEFAULT_MENU_MODE -eq 0 ]; then
     set VTOY_F3_CMD="vt_dynamic_menu 1 1"

-    set VTOY_HOTKEY_TIP="F1:Memdisk  F2:Power  F3:TreeView  F4:Localboot  F5:Tools  F6:ExMenu"
+    set VTOY_HOTKEY_TIP="h:Help  F1:Memdisk  F2:Power  F3:TreeView  F4:Localboot  F5:Tools  F6:ExMenu"

 else
     set VTOY_F3_CMD="vt_dynamic_menu 1 0"
 else
     set VTOY_F3_CMD="vt_dynamic_menu 1 0"

-    set VTOY_HOTKEY_TIP="F1:Memdisk  F2:Power  F3:ListView  F4:Localboot  F5:Tools  F6:ExMenu"
+    set VTOY_HOTKEY_TIP="h:Help  F1:Memdisk  F2:Power  F3:ListView  F4:Localboot  F5:Tools  F6:ExMenu"

 fi
 
 
 fi
 
 


@@ -1867,7 +2155,7 @@ elif [ "$vtoy_display_mode" = "serial_console" ]; then
     terminal_output  serial console    
 else    
     if [ -n "$vtoy_theme" ]; then
     terminal_output  serial console    
 else    
     if [ -n "$vtoy_theme" ]; then

-        set theme=$vtoy_theme
+        vt_set_theme

     else
         set theme=$prefix/themes/ventoy/theme.txt
     fi
     else
         set theme=$prefix/themes/ventoy/theme.txt
     fi


@@ -1878,6 +2166,15 @@ if [ -n "$VTOY_DEFAULT_KBD_LAYOUT" ]; then
     set_keyboard_layout "$VTOY_DEFAULT_KBD_LAYOUT"
 fi
 
     set_keyboard_layout "$VTOY_DEFAULT_KBD_LAYOUT"
 fi
 

+if [ -n "$VTOY_PLUGIN_PATH_CASE_MISMATCH" ]; then
+    clear
+    echo "$VTOY_PLUGIN_PATH_CASE_MISMATCH"
+    echo -e "\n\nPath case does not match! ventoy directory and ventoy.json MUST be all lowercase!"
+    echo -e "\n路径大小写不匹配！ventoy 目录和 ventoy.json 文件的名字必须是全部小写，请修正！"
+    echo -e "\n\npress ENTER to continue (请按回车键继续) ..."
+    read vtInputKey
+fi
+

 if [ -n "$VTOY_PLUGIN_SYNTAX_ERROR" ]; then
     clear
     echo -e "\n Syntax error detected in ventoy.json, please check! \n"
 if [ -n "$VTOY_PLUGIN_SYNTAX_ERROR" ]; then
     clear
     echo -e "\n Syntax error detected in ventoy.json, please check! \n"


@@ -1912,6 +2209,20 @@ export vtoy_efi_part
 export VENTOY_VERSION
 export VTOY_CUR_VIDEO_MODE
 export VTOY_EFI_ARCH
 export VENTOY_VERSION
 export VTOY_CUR_VIDEO_MODE
 export VTOY_EFI_ARCH

+export VTOY_MEM_DISK_STR
+export VTOY_ISO_RAW_STR
+export VTOY_GRUB2_MODE_STR
+export VTOY_WIMBOOT_MODE_STR
+export VTOY_ISO_UEFI_DRV_STR
+export VTOY_F2_CMD
+export VTOY_F4_CMD
+export VTOY_F5_CMD
+export VTOY_F6_CMD
+export VTOY_HELP_CMD
+export VTOY_CHKSUM_CMD
+export VTOY_HELP_TXT_LANGUAGE
+export VTOY_CHKSUM_FILE_PATH
+

 
 #special VTOY_DEFAULT_IMAGE process
 if [ -n "$VTOY_DEFAULT_IMAGE" ]; then
 
 #special VTOY_DEFAULT_IMAGE process
 if [ -n "$VTOY_DEFAULT_IMAGE" ]; then