1.0.85 release

[Ventoy.git] / INSTALL / grub / grub.cfg

diff --git a/INSTALL/grub/grub.cfg b/INSTALL/grub/grub.cfg
index 888ed8c22638b60384a0e0dc54d52524895d8831..5f8ae6cd048d71e52a94891cfcac9baa65248d73 100644 (file)
--- a/INSTALL/grub/grub.cfg
+++ b/INSTALL/grub/grub.cfg
@@ -91,7 +91,7 @@ function ventoy_ext_menu {
         unset ventoy_new_context
     else
        echo "ventoy_grub.cfg NOT exist."
-       echo -e "\npress ENTER to exit ..."
+       echo -V "VTMENU_ENTER_EXIT ..."
        read vtInputKey
     fi
 }
@@ -852,6 +852,13 @@ function uefi_linux_menu_func {
                 configfile "mem:${vt_sys_menu_mem_addr}:size:${vt_sys_menu_mem_size}"
             fi
         fi
+        
+        if [ $vtback_cfg_find -eq 0 ]; then
+            if [ -f (loop)/boot/isolinux/syslnx64.cfg ]; then
+                syslinux_configfile (loop)/boot/isolinux/syslnx64.cfg
+                set vtback_cfg_find=1
+            fi
+        fi
 
         if [ "$vtback_cfg_find" = "0" ]; then
             echo " "
@@ -1319,6 +1326,13 @@ function legacy_linux_menu_func {
                     configfile "mem:${vt_sys_menu_mem_addr}:size:${vt_sys_menu_mem_size}"
                 fi
             fi
+            
+            if [ $vtback_cfg_find -eq 0 ]; then
+                if [ -f (loop)/boot/isolinux/syslnx64.cfg ]; then
+                    syslinux_configfile (loop)/boot/isolinux/syslnx64.cfg
+                    set vtback_cfg_find=1
+                fi
+            fi
 
             vt_unset_boot_opt
             set root=$vtback_root        
@@ -1487,7 +1501,7 @@ function iso_common_menuentry {
             echo -e "\n $vt_volume_space $vt_chosen_size $vt_chosen_size_mod\n"
             echo -e "\n The size of the iso file \"$vt_chosen_size\" is invalid. File corrupted ?\n"
             echo -e " 此ISO文件的大小 \"$vt_chosen_size\" 有问题，请确认文件是否损坏。\n"
-            echo -e "\n press ENTER to continue (请按 回车 键继续) ..."
+            echo -v "VTMENU_ENTER_CONTINUE ..."
             read vtInputKey
         fi
     fi
@@ -1575,7 +1589,7 @@ function miso_common_menuentry {
 function common_unsupport_menuentry {
     echo -e "\n The name of the iso file could NOT contain space or non-ascii characters. \n"
     echo -e " 文件名中不能有中文或空格 \n"    
-    echo -e "\npress ENTER to exit (请按 回车 键返回) ..."    
+    echo -V "VTMENU_ENTER_EXIT ..."    
     read vtInputKey
 }
 
@@ -1722,7 +1736,7 @@ function vhd_common_menuentry {
                 echo -e "!!! WARNING !!!\n"
                 echo -e "\nPartition1 ($vtoy_iso_fs) is NOT ntfs, the VHD(x) file may not boot normally \n"
                 echo -e "\nVHD(x) 文件所在分区不是 ntfs 格式, 可能无法正常启动 \n\n"
-                echo -n "press ENTER to continue boot (请按 回车 键继续) ..."    
+                echo -vn "VTMENU_ENTER_CONTINUE ..."    
                 read vtInputKey
             fi
         fi
@@ -1831,7 +1845,7 @@ function vtoy_unsupport_menuentry {
 
 function only_uefi_tip {
     echo -e "\n This IMG file is only supported in UEFI mode. \n"
-    echo -e "\n press ENTER to exit ..."
+    echo -V "VTMENU_ENTER_EXIT ..."
     read vtInputKey 
 }
 
@@ -2089,7 +2103,7 @@ function ventoy_img_openwrt {
             ventoy_gui_console
             echo -e "\n ventoy_openwrt.xz not found. Please refer https://www.ventoy.net/en/doc_openwrt.html.\n"
             echo -e " 未找到 ventoy_openwrt.xz 文件。请参考 https://www.ventoy.net/cn/doc_openwrt.html\n"
-            echo -e "\n press ENTER to exit (请按 回车 键返回) ..."
+            echo -V "VTMENU_ENTER_EXIT ..."
             read vtInputKey
             ventoy_cli_console
             return
@@ -2221,7 +2235,7 @@ function ventoy_img_memtest86 {
 function img_unsupport_tip {
     echo -e "\n This IMG file is NOT supported now. \n"
     echo -e " 当前不支持启动此 IMG 文件 \n"    
-    echo -e "\npress ENTER to exit (请按 回车 键返回) ..."    
+    echo -V "VTMENU_ENTER_EXIT ..."
     read vtInputKey 
 }
 
@@ -2320,14 +2334,15 @@ function img_common_menuentry {
     elif [ -f (vtimghd,2)/loader/entries/ubos.conf ]; then
         ventoy_img_ubos
     elif [ -f (vtimghd,2)/etc/openwrt_version ]; then
-        ventoy_img_openwrt
-    elif [ -f (vtimghd,1)/efi/boot/mt86.png ]; then 
-        if [ "$grub_platform" = "pc" ]; then
-            img_unsupport_tip
-        else
-            ventoy_img_memtest86            
-        fi    
+        ventoy_img_openwrt    
     else
+        if [ -f (vtimghd,1)/efi/boot/mt86.png ]; then 
+            if [ "$grub_platform" = "pc" ]; then
+                img_unsupport_tip
+            fi 
+        fi
+
+        #common chain
         vt_linux_chain_data "${vtoy_iso_part}${vt_chosen_path}"
         ventoy_acpi_param ${vtoy_chain_mem_addr} 512
         if [ "$grub_platform" = "pc" ]; then 
@@ -2382,7 +2397,7 @@ function mimg_common_menuentry {
 #############################################################
 #############################################################
 
-set VENTOY_VERSION="1.0.84"
+set VENTOY_VERSION="1.0.85"
 
 #ACPI not compatible with Window7/8, so disable by default
 set VTOY_PARAM_NO_ACPI=1