fi
}
-function ventoy_power {
- configfile $prefix/power.cfg
-}
-
function ventoy_diagnosis {
vt_enum_video_mode
configfile $prefix/debug.cfg
for file in "efi/microsoft/boot/bcd" "sources/boot.wim" "boot/bcd" "bootmgr.efi" "boot/etfsboot.com" ; do
if vt_file_exist_nocase (loop)/$file; then
- set vtoy_os=Windows
+ set vtoy_os=Windows
break
fi
done
elif [ -e (loop)/bin/freebsd-version ]; then
set vtoy_os=Unix
set vt_unix_type=FreeBSD
+ elif [ -e (loop)/boot/kernel/geom_ventoy.ko ]; then
+ set vtoy_os=Unix
+ set vt_unix_type=FreeBSD
elif vt_str_begin "$vt_system_id" "DragonFly"; then
set vtoy_os=Unix
set vt_unix_type=DragonFly
#Check for PE without external tools
#set compatible if ISO file is less than 80MB
if [ $vt_chosen_size -gt 33554432 -a $vt_chosen_size -le 83886080 ]; then
- set ventoy_compatible=YES
- elif [ -e $1/WEPE/WEPE.INI ]; then
- set ventoy_compatible=YES
+ set ventoy_compatible=YES
fi
return
function vt_check_compatible_linux {
if vt_str_begin "$vt_volume_id" "embootkit"; then
set ventoy_compatible=YES
+ elif [ -e "$1/casper/tinycore.gz" ]; then
+ set ventoy_compatible=YES
fi
return
vt_linux_specify_initrd_file /initrd.gz
elif [ -e (loop)/slax/boot/initrfs.img ]; then
vt_linux_specify_initrd_file /slax/boot/initrfs.img
+ elif [ -e (loop)/minios/boot/initrfs.img ]; then
+ vt_linux_specify_initrd_file /minios/boot/initrfs.img
elif [ -e (loop)/pmagic/initrd.img ]; then
vt_linux_specify_initrd_file /pmagic/initrd.img
elif [ -e (loop)/boot/initrd.xz ]; then
vt_linux_specify_initrd_file /isolinux/initrd.gz
fi
+ if vt_str_begin "$vt_volume_id" "QUBES"; then
+ vt_linux_specify_initrd_file /images/pxeboot/initrd.img
+ fi
+
if [ "$vt_chosen_size" = "1133375488" ]; then
if [ -d (loop)/boot/grub/x86_64-efi ]; then
vt_cpio_busybox64 "64h"
vt_linux_specify_initrd_file /pyabr/boot/initrfs.img
elif [ -f (loop)/initrd0.img ]; then
vt_linux_specify_initrd_file /initrd0.img
+ elif [ -f (loop)/sysresccd/boot/i686/sysresccd.img ]; then
+ vt_linux_specify_initrd_file /sysresccd/boot/i686/sysresccd.img
+
fi
}
set vtFreeBsdDistro=FreeBSD
set vt_freebsd_ver=xx
+ if [ -e (loop)/boot/kernel/geom_ventoy.ko ]; then
+ vt_unix_ko_fillmap /boot/kernel/geom_ventoy.ko
+ return
+ fi
+
if vt_strstr "$vt_volume_id" "GHOSTBSD"; then
ventoy_get_ghostbsd_ver "$1" "${chosen_path}"
elif vt_strstr "$vt_volume_id" "FREENAS"; then
if [ "$vt_freebsd_ver" = "xx" ]; then
if [ -e (loop)/boot/kernel/kernel ]; then
vt_unix_parse_freebsd_ver_elf (loop)/boot/kernel/kernel $vt_freebsd_bit vt_freebsd_ver
+ elif [ -e (loop)/boot/kernel/kernel.gz ]; then
+ vt_unix_parse_freebsd_ver_elf (loop)/boot/kernel/kernel.gz $vt_freebsd_bit vt_freebsd_ver
fi
if [ "$vt_freebsd_ver" = "xx" ]; then
fi
done
- vt_unix_replace_ko $vt_unix_mod_path (vtunix)/ventoy_unix/$vtFreeBsdDistro/geom_ventoy_ko/$vt_freebsd_ver/$vt_freebsd_bit/geom_ventoy.ko.xz
- vt_unix_replace_conf FreeBSD "${1}${chosen_path}"
+ if [ -n "$vt_unix_mod_path" ]; then
+ vt_unix_replace_ko $vt_unix_mod_path (vtunix)/ventoy_unix/$vtFreeBsdDistro/geom_ventoy_ko/$vt_freebsd_ver/$vt_freebsd_bit/geom_ventoy.ko.xz
+ vt_unix_replace_conf FreeBSD "${1}${chosen_path}"
+ elif [ -e (loop)/easyre.ufs.uzip ]; then
+ vt_unix_replace_ko "/boot/grub/i386-pc/linux.mod" (vtunix)/ventoy_unix/$vtFreeBsdDistro/geom_ventoy_ko/$vt_freebsd_ver/$vt_freebsd_bit/geom_ventoy.ko.xz
+ if [ "$grub_platform" = "pc" ]; then
+ vt_unix_replace_grub_conf "/boot/grub/i386-pc/linux.mod" "cd9"
+ else
+ vt_unix_replace_conf FreeBSD "${1}${chosen_path}" "cd9"
+ fi
+ fi
}
function ventoy_dragonfly_proc {
function ventoy_unix_comm_proc {
vt_unix_reset
+ vt_unix_check_vlnk "${1}${chosen_path}"
+
if [ "$ventoy_compatible" = "NO" ]; then
loopback vtunix $vtoy_efi_part/ventoy/ventoy_unix.cpio
elif [ -e (loop)/syslinux/alt0/full.cz ]; then
vt_add_replace_file 0 "EFI\\BOOT\\full.cz"
set FirstTryBootFile='@EFI@BOOT@grubx64.efi'
-
+
+ elif vt_str_begin "$vt_volume_id" "SolusLive"; then
+ vt_add_replace_file 0 "initrd"
fi
ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
ventoy_cli_console
+ unset vtGrub2Mode
if vt_check_mode 3; then
+ set vtGrub2Mode=1
+ elif vt_str_begin "$vt_volume_id" "KRD"; then
+ if [ -f (loop)/boot/grub/grub.cfg.sig ]; then
+ set vtGrub2Mode=1
+ fi
+ fi
+
+ if [ -n "$vtGrub2Mode" ]; then
ventoy_debug_pause
else
if [ "$VTOY_EFI_ARCH" != "mips" ]; then
loopback loop "$1$2"
fi
- if [ -f (loop)/isolinux/isolinux.cfg ]; then
- if vt_iso9660_isjoliet; then
- vt_iso9660_nojoliet 1
- loopback -d loop
- loopback loop "$1$2"
- fi
+
+ if vt_syslinux_need_nojoliet "$1$2"; then
+ vt_iso9660_nojoliet 1
+ loopback -d loop
+ loopback loop "$1$2"
fi
-
+
vt_load_cpio $vtoy_path "$2" "$1" "busybox=$ventoy_busybox_ver"
vt_linux_clear_initrd
set vtcompat=1
fi
+
+ # auto memdisk mode for some special ISO files
+ vt_iso_vd_id_parse "${vtoy_iso_part}${vt_chosen_path}"
+ unset vtMemDiskBoot
+ if vt_check_mode 0; then
+ set vtMemDiskBoot=1
+ else
+ if [ "$grub_platform" = "pc" ]; then
+ if vt_iso_vd_id_begin 1 0 "Memtest86+"; then
+ set vtMemDiskBoot=1
+ elif vt_iso_vd_id_begin 0 1 "KolibriOS"; then
+ set vtMemDiskBoot=1
+ fi
+ fi
+ fi
+ vt_iso_vd_id_clear
+
+
if [ "$grub_platform" = "pc" ]; then
- if vt_check_mode 0; then
+ if [ -n "$vtMemDiskBoot" ]; then
legacy_iso_memdisk $vtoy_iso_part "$vt_chosen_path"
else
legacy_iso_menu_func $vtoy_iso_part "$vt_chosen_path"
fi
else
- if vt_check_mode 0; then
+ if [ -n "$vtMemDiskBoot" ]; then
uefi_iso_memdisk $vtoy_iso_part "$vt_chosen_path"
else
uefi_iso_menu_func $vtoy_iso_part "$vt_chosen_path"
return
fi
- vt_concat_efi_iso "${vtoy_iso_part}${vt_chosen_path}" vtoy_iso_buf
+ unset vt_vlnk_dst
+ if vt_is_vlnk_name "${vt_chosen_path}"; then
+ vt_get_vlnk_dst "${vtoy_iso_part}${vt_chosen_path}" vt_vlnk_dst
+ if [ -z "$vt_vlnk_dst" ]; then
+ echo -e "\n### VLNK FILE NOT FOUND ###\n### VLNK 文件不存在 ###\n"
+ ventoy_pause
+ return
+ fi
+ else
+ vt_vlnk_dst="${vtoy_iso_part}${vt_chosen_path}"
+ fi
ventoy_debug_pause
-
+
ventoy_cli_console
+
+ #first try with chainload
+ set vtOldRoot=$root
+ set root=$vtoy_iso_part
+ chainloader "${vt_vlnk_dst}"
+ boot
- unset vtoy_dotefi_retry
+ #retry with isoboot
+ set root=$vtOldRoot
+ vt_concat_efi_iso "${vt_vlnk_dst}" vtoy_iso_buf
chainloader ${vtoy_path}/ventoy_${VTOY_EFI_ARCH}.efi memdisk env_param=${env_param} dotefi isoefi=on ${vtdebug_flag} mem:${vtoy_iso_buf_addr}:size:${vtoy_iso_buf_size}
- boot
-
- if [ -n "$vtoy_dotefi_retry" ]; then
- unset vtoy_dotefi_retry
- chainloader "${vtoy_iso_part}${vt_chosen_path}"
- boot
- fi
-
+ boot
+
ventoy_gui_console
}
}
function vhd_common_menuentry {
-
- if [ "$VTOY_VHD_NO_WARNING" != "1" ]; then
- if [ "$vtoy_iso_fs" != "ntfs" ]; then
- echo -e "!!! WARNING !!!\n"
- echo -e "\nPartition1 ($vtoy_iso_fs) is NOT ntfs, the VHD(x) file may not boot normally \n"
- echo -e "\nVHD(x) 文件所在分区不是 ntfs 格式, 可能无法正常启动 \n\n"
- echo -n "press ENTER to continue boot (请按 回车 键继续) ..."
- read vtInputKey
- fi
- fi
-
vt_chosen_img_path vt_chosen_path vt_chosen_size
if vt_check_password "${vt_chosen_path}"; then
return
fi
- vhdboot_common_func "${vt_chosen_path}"
+ unset vt_vlnk_dst
+ if vt_is_vlnk_name "${vt_chosen_path}"; then
+ vt_get_vlnk_dst "${vtoy_iso_part}${vt_chosen_path}" vt_vlnk_dst
+ if [ -z "$vt_vlnk_dst" ]; then
+ echo -e "\n### VLNK FILE NOT FOUND ###\n### VLNK 文件不存在 ###\n"
+ ventoy_pause
+ return
+ fi
+ else
+ vt_vlnk_dst="${vt_chosen_path}"
+ if [ "$VTOY_VHD_NO_WARNING" != "1" ]; then
+ if [ "$vtoy_iso_fs" != "ntfs" ]; then
+ echo -e "!!! WARNING !!!\n"
+ echo -e "\nPartition1 ($vtoy_iso_fs) is NOT ntfs, the VHD(x) file may not boot normally \n"
+ echo -e "\nVHD(x) 文件所在分区不是 ntfs 格式, 可能无法正常启动 \n\n"
+ echo -n "press ENTER to continue boot (请按 回车 键继续) ..."
+ read vtInputKey
+ fi
+ fi
+ fi
+
+ vhdboot_common_func "${vt_vlnk_dst}"
}
function vhd_unsupport_menuentry {
return
fi
- vtoyboot_common_func "${vtoy_iso_part}${vt_chosen_path}"
+ unset vt_vlnk_dst
+ if vt_is_vlnk_name "${vt_chosen_path}"; then
+ vt_get_vlnk_dst "${vtoy_iso_part}${vt_chosen_path}" vt_vlnk_dst
+ if [ -z "$vt_vlnk_dst" ]; then
+ echo -e "\n### VLNK FILE NOT FOUND ###\n### VLNK 文件不存在 ###\n"
+ ventoy_pause
+ return
+ fi
+ else
+ vt_vlnk_dst="${vtoy_iso_part}${vt_chosen_path}"
+ fi
+
+ vtoyboot_common_func "${vt_vlnk_dst}"
}
function vtoy_unsupport_menuentry {
}
function ventoy_img_recalbox {
+ if [ $vtoy_img_max_part_end -gt $vt_chosen_size ]; then
+ echo -e "\nPlease extend the img file size before boot it. \n"
+ ventoy_pause
+ return
+ fi
+
vt_load_cpio $vtoy_path "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+ if [ -e (vtimghd,1)/boot/recalbox ]; then
+ loopback recalbox (vtimghd,1)/boot/recalbox
+ vt_get_lib_module_ver (recalbox) /lib/modules/ vt_module_ver
+ if [ -n "$vt_module_ver" ]; then
+ vt_img_extra_initrd_append (recalbox)/lib/modules/$vt_module_ver/kernel/drivers/md/dm-mod.ko
+ fi
+ fi
+
ventoy_debug_pause
#boot image file
ventoy_img_batocera
elif vt_str_begin "$vtImgHd1Label" "Tails"; then
ventoy_img_tails
- elif [ "$vtImgHd2Label" = "RECALBOX" ]; then
+ elif [ "$vtImgHd2Label" = "RECALBOX" -o "$vtImgHd1Label" = "RECALBOX" ]; then
ventoy_img_recalbox
elif [ "$vtImgHd1Label" = "ESYSRESCUE" ]; then
ventoy_img_esysrescue
#############################################################
#############################################################
-set VENTOY_VERSION="1.0.57"
+set VENTOY_VERSION="1.0.74"
#ACPI not compatible with Window7/8, so disable by default
set VTOY_PARAM_NO_ACPI=1
set VTOY_WIMBOOT_MODE_STR="WIMBOOT Mode"
set VTOY_ISO_UEFI_DRV_STR="UEFI FS"
-set VTOY_F2_CMD="ventoy_power"
+set VTOY_F2_CMD="vt_browser_disk"
set VTOY_F4_CMD="ventoy_localboot"
set VTOY_F5_CMD="ventoy_diagnosis"
set VTOY_F6_CMD="ventoy_ext_menu"
if [ $VTOY_DEFAULT_MENU_MODE -eq 0 ]; then
set VTOY_F3_CMD="vt_dynamic_menu 1 1"
- set VTOY_HOTKEY_TIP="h:Help F1:Memdisk F2:Power F3:TreeView F4:Localboot F5:Tools F6:ExMenu"
+ set VTOY_HOTKEY_TIP="h:Help F1:Memdisk F2:Browser F3:TreeView F4:Localboot F5:Tools F6:ExMenu"
else
set VTOY_F3_CMD="vt_dynamic_menu 1 0"
- set VTOY_HOTKEY_TIP="h:Help F1:Memdisk F2:Power F3:ListView F4:Localboot F5:Tools F6:ExMenu"
+ set VTOY_HOTKEY_TIP="h:Help F1:Memdisk F2:Browser F3:ListView F4:Localboot F5:Tools F6:ExMenu"
fi
+terminal_output console
if [ -n "$vtoy_gfxmode" ]; then
set gfxmode=$vtoy_gfxmode
terminal_output gfxterm
fi
+if [ "$grub_platform" = "efi" ]; then
+ set mouse_delta=4000
+ # terminal_input --append mouse
+fi
+
if [ -n "$VTOY_DEFAULT_KBD_LAYOUT" ]; then
set_keyboard_layout "$VTOY_DEFAULT_KBD_LAYOUT"
fi
if [ -n "$VTOY_PLUGIN_SYNTAX_ERROR" ]; then
clear
- echo -e "\n Syntax error detected in ventoy.json, please check! \n"
- echo -e " ventoy.json 文件中有语法错误，所有配置都不会生效，请检查！\n"
+ if [ -n "$VTOY_PLUGIN_ENCODE_ERROR" ]; then
+ echo -e "\n Encoding type for ventoy.json is not supported, please convert to UTF-8.\n"
+ echo -e " ventoy.json 文件编码格式不支持，请转换为 UTF-8 编码格式！\n"
+ else
+ echo -e "\n Syntax error detected in ventoy.json, please check! \n"
+ echo -e " ventoy.json 文件中有语法错误，所有配置都不会生效，请检查！\n"
+ fi
+
echo -e "\n press ENTER to continue (请按 回车 键继续) ..."
- read vtInputKey
+ read vtInputKey
fi
+
for vtTFile in ventoy.json ventoy_grub.cfg; do
if [ -f $vtoy_efi_part/ventoy/$vtTFile ]; then
clear
export VTOY_CHKSUM_FILE_PATH
+#colect all image files (iso files)
+set ventoy_img_count=0
+vt_list_img $vtoy_iso_part ventoy_img_count
+
+#Main menu
+if [ $ventoy_img_count -gt 0 ]; then
+ if [ $VTOY_DEFAULT_MENU_MODE -eq 0 ]; then
+ vt_dynamic_menu 0 0
+ else
+ vt_dynamic_menu 0 1
+ fi
+else
+ if [ -n "$VTOY_NO_ISO_TIP" ]; then
+ NO_ISO_MENU="No ISO or supported IMG files found, $VTOY_NO_ISO_TIP"
+ elif [ -n "$VTOY_DEFAULT_SEARCH_ROOT" ]; then
+ NO_ISO_MENU="No ISO or supported IMG files found, please check VTOY_DEFAULT_SEARCH_ROOT"
+ else
+ NO_ISO_MENU="No ISO or supported IMG files found"
+ fi
+ menuentry "$NO_ISO_MENU (Press enter to reboot ...)" {
+ echo -e "\n Rebooting ... "
+ reboot
+ }
+fi
+
+
#special VTOY_DEFAULT_IMAGE process
if [ -n "$VTOY_DEFAULT_IMAGE" ]; then
if regexp --set 1:vtHotkey --set 2:vtDefault "(F[2-9])>(.*)" "$VTOY_DEFAULT_IMAGE"; then
export timeout
export default
-
+
+ vt_fn_mutex_lock 1
+
if [ "$vtHotkey" = "F2" ]; then
- ventoy_power
+ unset timeout
+ vt_browser_disk
elif [ "$vtHotkey" = "F4" ]; then
ventoy_localboot
elif [ "$vtHotkey" = "F5" ]; then
ventoy_ext_menu
fi
+ vt_fn_mutex_lock 0
+
unset timeout
unset default
fi
fi
-#colect all image files (iso files)
-set ventoy_img_count=0
-vt_list_img $vtoy_iso_part ventoy_img_count
-
-#Main menu
-if [ $ventoy_img_count -gt 0 ]; then
- if [ $VTOY_DEFAULT_MENU_MODE -eq 0 ]; then
- vt_dynamic_menu 0 0
- else
- vt_dynamic_menu 0 1
- fi
-else
- if [ -n "$VTOY_NO_ISO_TIP" ]; then
- NO_ISO_MENU="No ISO files found, $VTOY_NO_ISO_TIP"
- elif [ -n "$VTOY_DEFAULT_SEARCH_ROOT" ]; then
- NO_ISO_MENU="No ISO files found, please check VTOY_DEFAULT_SEARCH_ROOT"
- else
- NO_ISO_MENU="No ISO files found"
- fi
- menuentry "$NO_ISO_MENU (Press enter to reboot ...)" {
- echo -e "\n Rebooting ... "
- reboot
- }
-fi
projects / Ventoy.git / blobdiff