function vt_check_compatible_pe {
#Check for PE without external tools
if [ -f "$1/HBCD_PE.ini" ]; then
- set ventoy_compatible=YES
+ set ventoy_compatible=YES
fi
}
}
function ventoy_get_midnightbsd_ver {
- set vt_freebsd_ver=11.x
+ if vt_str_begin "$vt_volume_id" "1_"; then
+ set vt_freebsd_ver=11.x
+ elif vt_str_begin "$vt_volume_id" "2_"; then
+ set vt_freebsd_ver=2.x
+ elif vt_str_begin "$vt_volume_id" "3_"; then
+ set vt_freebsd_ver=3.x
+ fi
}
function ventoy_freebsd_proc {
set vt_freebsd_ver=9.x
fi
+
+ if [ -e (loop)/usr/freebsd-dist/cloninst.sh ]; then
+ set vtFreeBsdDistro=ClonOS
+ fi
+
set vt_freebsd_bit=64
for file in "/boot/kernel/kernel" "/boot/kernel/kernel.gz"; do
if [ -e (loop)/$file ]; then
fi
if [ -n "${vtdebug_flag}" ]; then
- echo "This is FreeBSD $vt_freebsd_ver ${vt_freebsd_bit}bit"
+ echo "This is $vtFreeBsdDistro $vt_freebsd_ver ${vt_freebsd_bit}bit"
fi
unset vt_unix_mod_path
fi
done
- if [ -e (loop)/usr/freebsd-dist/cloninst.sh ]; then
- set vtFreeBsdDistro=ClonOS
- fi
-
vt_unix_replace_ko $vt_unix_mod_path (vtunix)/ventoy_unix/$vtFreeBsdDistro/geom_ventoy_ko/$vt_freebsd_ver/$vt_freebsd_bit/geom_ventoy.ko.xz
vt_unix_replace_conf FreeBSD "${1}${chosen_path}"
}
vt_windows_chain_data "${1}${chosen_path}"
ventoy_debug_pause
+ if vt_check_mode 4; then
+ vtoy_windows_wimboot_func
+ fi
+
if [ -n "$vtoy_chain_mem_addr" ]; then
ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
ventoy_cli_console
}
+function vtoy_windows_wimboot_func {
+ if [ -f (loop)/x86/sources/boot.wim -a -f (loop)/x64/sources/boot.wim ]; then
+ vt_sel_wimboot vtoy_wimboot_bit
+ if [ "$vtoy_wimboot_bit" = "32" ]; then
+ set vtoy_wimboot_prefix=(loop)/x86
+ else
+ set vtoy_wimboot_prefix=(loop)/x64
+ fi
+ else
+ set vtoy_wimboot_prefix=(loop)
+ if vt_is_pe64 $vtoy_wimboot_prefix/setup.exe; then
+ set vtoy_wimboot_bit=64
+ else
+ set vtoy_wimboot_bit=32
+ fi
+ fi
+
+ if [ -n "${vtdebug_flag}" ]; then
+ echo vtoy_wimboot_prefix=$vtoy_wimboot_prefix vtoy_wimboot_bit=$vtoy_wimboot_bit
+ fi
+
+ for wmfile in sources/boot.wim boot/bcd boot/boot.sdi; do
+ if [ ! -f $vtoy_wimboot_prefix/$wmfile ]; then
+ return
+ fi
+ done
+
+ if [ -f $vtoy_wimboot_prefix/sources/install.wim -o -f $vtoy_wimboot_prefix/sources/install.esd ]; then
+ vt_windows_wimboot_data
+ else
+ return
+ fi
+
+ if [ "$grub_platform" = "pc" ]; then
+ set vt_wimkernel=wimboot.x86_64.xz
+
+ linux16 "$vtoy_path/$vt_wimkernel" quiet
+ ventoy_debug_pause
+
+ echo Loading files...... (This may take a few minutes, please wait)
+ initrd16 newc:vtoyjump.exe:$vtoy_path/vtoyjump${vtoy_wimboot_bit}.exe \
+ newc:wimboot.data:mem:${vtoy_wimboot_mem_addr}:size:${vtoy_wimboot_mem_size} \
+ newc:winpeshl.ini:mem:${vtoy_winpeshl_ini_addr}:size:${vtoy_winpeshl_ini_size} \
+ newc:bcd:$vtoy_wimboot_prefix/boot/bcd \
+ newc:boot.sdi:$vtoy_wimboot_prefix/boot/boot.sdi \
+ newc:boot.wim:$vtoy_wimboot_prefix/sources/boot.wim
+ boot
+ else
+ if [ "$grub_cpu" = "i386" ]; then
+ set vt_wimkernel=wimboot.i386.efi.xz
+ else
+ set vt_wimkernel=wimboot.x86_64.xz
+ fi
+
+ echo Loading files...... (This may take a few minutes, please wait)
+ vt_load_file_to_mem "nodecompress" $vtoy_wimboot_prefix/sources/boot.wim vtoy_wimfile_mem
+ if [ $? -eq 0 ]; then
+ set vtoy_wimfile_path=mem:${vtoy_wimfile_mem_addr}:size:${vtoy_wimfile_mem_size}
+ else
+ set vtoy_wimfile_path=$vtoy_wimboot_prefix/sources/boot.wim
+ fi
+
+ ventoy_cli_console
+ chainloader "$vtoy_path/$vt_wimkernel" quiet \
+ "vf=wimboot.data:mem:${vtoy_wimboot_mem_addr}:size:${vtoy_wimboot_mem_size}" \
+ "vf=winpeshl.ini:mem:${vtoy_winpeshl_ini_addr}:size:${vtoy_winpeshl_ini_size}" \
+ "vf=vtoyjump.exe:$vtoy_path/vtoyjump${vtoy_wimboot_bit}.exe" \
+ "vf=bcd:$vtoy_wimboot_prefix/boot/bcd" \
+ "vf=boot.sdi:$vtoy_wimboot_prefix/boot/boot.sdi" \
+ "vf=boot.wim:$vtoy_wimfile_path" \
+ pfsize=$vtoy_chain_file_size \
+ pfread=$vtoy_chain_file_read
+ boot
+ ventoy_gui_console
+ fi
+}
+
function legacy_windows_menu_func {
vt_windows_reset
vt_windows_chain_data "${1}${chosen_path}"
ventoy_debug_pause
-
+
+ if vt_check_mode 4; then
+ vtoy_windows_wimboot_func
+ fi
+
if [ -n "$vtoy_chain_mem_addr" ]; then
ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} ibft mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
common_unsupport_menuentry
}
+function vhdboot_common_func {
+ vt_patch_vhdboot "$1"
+
+ ventoy_debug_pause
+
+ if [ -n "$vtoy_vhd_buf_addr" ]; then
+ if [ "$grub_platform" = "pc" ]; then
+ ventoy_cli_console
+ linux16 $vtoy_path/memdisk iso raw
+ initrd16 mem:${vtoy_vhd_buf_addr}:size:${vtoy_vhd_buf_size}
+ boot
+ ventoy_gui_console
+ else
+ ventoy_cli_console
+ chainloader ${vtoy_path}/ventoy_${VTOY_EFI_ARCH}.efi memdisk env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_vhd_buf_addr}:size:${vtoy_vhd_buf_size}
+ boot
+ ventoy_gui_console
+ fi
+ else
+ echo "Please put the right ventoy_vhdboot.img file to the 1st partition"
+ ventoy_pause
+ fi
+}
+
function vhd_common_menuentry {
if [ "$VTOY_VHD_NO_WARNING" != "1" ]; then
return
fi
- vt_patch_vhdboot "$vt_chosen_path"
-
- ventoy_debug_pause
-
- if [ -n "$vtoy_vhd_buf_addr" ]; then
- if [ "$grub_platform" = "pc" ]; then
- linux16 $vtoy_path/memdisk iso raw
- initrd16 mem:${vtoy_vhd_buf_addr}:size:${vtoy_vhd_buf_size}
- boot
- else
- ventoy_cli_console
- chainloader ${vtoy_path}/ventoy_${VTOY_EFI_ARCH}.efi memdisk env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_vhd_buf_addr}:size:${vtoy_vhd_buf_size}
- boot
- ventoy_gui_console
- fi
- else
- echo "Please put the right ventoy_vhdboot.img file to the 1st partition"
- ventoy_pause
- fi
+ vhdboot_common_func "${vt_chosen_path}"
}
function vhd_unsupport_menuentry {
vt_unset_boot_opt
}
+function ventoy_img_openwrt {
+ if [ -e (vtimghd,2)/lib64 ]; then
+ set ventoy_busybox_ver=64
+ fi
+
+ if [ ! -f ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz ]; then
+ ventoy_gui_console
+ echo -e "\n ventoy_openwrt.xz not found. Please refer https://www.ventoy.net/en/doc_openwrt.html.\n"
+ echo -e " 未找到 ventoy_openwrt.xz 文件。请参考 https://www.ventoy.net/cn/doc_openwrt.html\n"
+ echo -e "\n press ENTER to exit (请按 回车 键返回) ..."
+ read vtInputKey
+ ventoy_cli_console
+ return
+ fi
+
+ if vt_img_check_range "${vtoy_iso_part}${vt_chosen_path}"; then
+ ventoy_debug_pause
+ else
+ ventoy_gui_console
+ echo -e "\n IMG file need processed. Please refer https://www.ventoy.net/en/doc_openwrt.html.\n"
+ echo -e " 此 IMG 文件必须处理之后才能支持。请参考 https://www.ventoy.net/cn/doc_openwrt.html\n"
+ echo -e "\n press ENTER to exit (请按 回车 键返回) ..."
+ read vtInputKey
+ ventoy_cli_console
+ return
+ fi
+
+
+ vt_load_cpio $vtoy_path "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+ vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+
+ vt_img_extra_initrd_append ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz
+
+
+ #boot image file
+ vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=openwrt
+ vt_img_hook_root
+
+ set root=(vtimghd,1)
+ configfile (vtimghd,1)/boot/grub/grub.cfg
+
+ vt_img_unhook_root
+ vt_unset_boot_opt
+}
+
function ventoy_img_tails {
vt_load_cpio $vtoy_path "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
vt_img_extra_initrd_reset
+
vt_get_fs_label (vtimghd,1) vtImgHd1Label
- if [ -d (vtimghd,2)/lib ]; then
+ if [ -d (vtimghd,2)/lib ]; then
vt_get_fs_label (vtimghd,2) vtImgHd2Label
fi
vt_1st_line (vtimghd,1)/etc/hostname vtImgHostname
fi
+
if [ -e (vtimghd,1)/easy.sfs ]; then
ventoy_img_easyos
elif [ -e (vtimghd,1)/volumio.initrd ]; then
ventoy_img_recalbox
elif [ -f (vtimghd,2)/loader/entries/ubos.conf ]; then
ventoy_img_ubos
+ elif [ -f (vtimghd,2)/etc/openwrt_version ]; then
+ ventoy_img_openwrt
elif [ -f (vtimghd,1)/efi/boot/mt86.png ]; then
if [ "$grub_platform" = "pc" ]; then
img_unsupport_tip
#############################################################
#############################################################
-set VENTOY_VERSION="1.0.40"
+set VENTOY_VERSION="1.0.43"
#ACPI not compatible with Window7/8, so disable by default
set VTOY_PARAM_NO_ACPI=1
set VTOY_MEM_DISK_STR="[Memdisk]"
set VTOY_ISO_RAW_STR="Compatible Mode"
set VTOY_GRUB2_MODE_STR="GRUB2 Mode"
+set VTOY_WIMBOOT_MODE_STR="WIMBOOT Mode"
set VTOY_ISO_UEFI_DRV_STR="UEFI FS"
set VTOY_F2_CMD="ventoy_power"
projects / Ventoy.git / blobdiff