X-Git-Url: https://glassweightruler.freedombox.rocks/gitweb/Ventoy.git/blobdiff_plain/1186caba41c57c390db2aee650d9c451809bffa3..ce6d379564344879d8c441fa01a2c622ee85adb8:/INSTALL/grub/grub.cfg diff --git a/INSTALL/grub/grub.cfg b/INSTALL/grub/grub.cfg index 38ab7d4..a263996 100644 --- a/INSTALL/grub/grub.cfg +++ b/INSTALL/grub/grub.cfg @@ -44,11 +44,18 @@ function ventoy_gui_console { fi } +function ventoy_acpi_param { + if [ "$VTOY_PARAM_NO_ACPI" != "1" ]; then + vt_acpi_param $1 $2 + fi +} + function ventoy_power { configfile $prefix/power.cfg } -function ventoy_diagnosis { +function ventoy_diagnosis { + vt_enum_video_mode configfile $prefix/debug.cfg } @@ -157,6 +164,9 @@ function distro_specify_initrd_file { if [ -e (loop)/casper/initrd ]; then vt_linux_specify_initrd_file /casper/initrd fi + if [ -e (loop)/casper/initrd.gz ]; then + vt_linux_specify_initrd_file /casper/initrd.gz + fi if [ -e (loop)/casper/initrd-oem ]; then vt_linux_specify_initrd_file /casper/initrd-oem fi @@ -170,14 +180,28 @@ function distro_specify_initrd_file { vt_linux_specify_initrd_file /pmagic/initrd.img elif [ -e (loop)/boot/initrd.xz ]; then vt_linux_specify_initrd_file /boot/initrd.xz + elif [ -e (loop)/boot/initrd.gz ]; then + vt_linux_specify_initrd_file /boot/initrd.gz elif [ -f (loop)/boot/initrd ]; then vt_linux_specify_initrd_file /boot/initrd elif [ -f (loop)/boot/x86_64/loader/initrd ]; then vt_linux_specify_initrd_file /boot/x86_64/loader/initrd elif [ -f (loop)/boot/initramfs-x86_64.img ]; then vt_linux_specify_initrd_file /boot/initramfs-x86_64.img - + elif [ -f (loop)/boot/isolinux/initramfs_data64.cpio.gz ]; then + vt_linux_specify_initrd_file /boot/isolinux/initramfs_data64.cpio.gz + + fi + + if [ -f (loop)/isolinux/initrd.gz ]; then + vt_linux_specify_initrd_file /isolinux/initrd.gz + fi + + if [ "$vt_chosen_size" = "1133375488" ]; then + if [ -d (loop)/boot/grub/x86_64-efi ]; then + vt_cpio_busybox64 + fi fi } @@ -206,6 +230,11 @@ function distro_specify_initrd_file_phase2 { if [ -f (loop)/parabola/boot/i686/parabolaiso.img ]; then vt_linux_specify_initrd_file /parabola/boot/i686/parabolaiso.img fi + elif [ -f (loop)/hyperbola/boot/x86_64/hyperiso.img ]; then + vt_linux_specify_initrd_file /hyperbola/boot/x86_64/hyperiso.img + if [ -f (loop)/hyperbola/boot/i686/hyperiso.img ]; then + vt_linux_specify_initrd_file /hyperbola/boot/i686/hyperiso.img + fi elif [ -f (loop)/EFI/BOOT/initrd.img ]; then #Qubes vt_linux_specify_initrd_file /EFI/BOOT/initrd.img @@ -216,7 +245,26 @@ function distro_specify_initrd_file_phase2 { vt_linux_specify_initrd_file /initrd elif [ -f (loop)/live/initrd1 ]; then vt_linux_specify_initrd_file /live/initrd1 - + elif [ -f (loop)/isolinux/initrd.img ]; then + vt_linux_specify_initrd_file /isolinux/initrd.img + elif [ -f (loop)/isolinux/initrd.gz ]; then + vt_linux_specify_initrd_file /isolinux/initrd.gz + elif [ -f (loop)/syslinux/kernel/initramfs.gz ]; then + vt_linux_specify_initrd_file /syslinux/kernel/initramfs.gz + elif vt_strstr $vt_volume_id "Daphile"; then + vt_linux_parse_initrd_isolinux (loop)/isolinux/ + elif [ -f (loop)/boot/rootfs.xz ]; then + vt_linux_specify_initrd_file /boot/rootfs.xz + if [ "$grub_platform" != "pc" ]; then + vt_add_replace_file 0 "minimal\\x86_64\\rootfs.xz" + fi + elif [ -f (loop)/arch/boot/x86_64/archiso.img ]; then + vt_linux_specify_initrd_file /arch/boot/x86_64/archiso.img + if [ "$grub_platform" != "pc" ]; then + vt_add_replace_file 0 "EFI\\archiso\\archiso.img" + fi + elif [ -f (loop)/blackarch/boot/x86_64/archiso.img ]; then + vt_linux_specify_initrd_file /blackarch/boot/x86_64/archiso.img fi } @@ -230,6 +278,14 @@ function ventoy_get_ghostbsd_ver { set vt_freebsd_ver=12.x } +function ventoy_get_furybsd_ver { + if regexp "13\.[0-9]" "$2"; then + set vt_freebsd_ver=13.x + else + set vt_freebsd_ver=12.x + fi +} + function ventoy_get_freenas_ver { set vt_freebsd_ver=11.x @@ -245,11 +301,19 @@ function ventoy_get_freenas_ver { fi } +function ventoy_get_midnightbsd_ver { + set vt_freebsd_ver=11.x +} + function ventoy_freebsd_proc { + set vtFreeBsdDistro=FreeBSD + if vt_strstr "$vt_volume_id" "GHOSTBSD"; then ventoy_get_ghostbsd_ver $1 ${chosen_path} elif vt_strstr "$vt_volume_id" "FREENAS"; then ventoy_get_freenas_ver $1 ${chosen_path} + elif vt_strstr "$vt_volume_id" "FURYBSD"; then + ventoy_get_furybsd_ver $1 ${chosen_path} elif regexp "^13_[0-9]" "$vt_volume_id"; then set vt_freebsd_ver=13.x elif regexp "^12_[0-9]" "$vt_volume_id"; then @@ -260,6 +324,9 @@ function ventoy_freebsd_proc { set vt_freebsd_ver=10.x elif regexp "^9_[0-9]" "$vt_volume_id"; then set vt_freebsd_ver=9.x + elif [ -d (loop)/usr/midnightbsd-dist ]; then + ventoy_get_midnightbsd_ver $1 ${chosen_path} + set vtFreeBsdDistro=MidnightBSD elif [ -e (loop)/bin/freebsd-version ]; then vt_unix_parse_freebsd_ver (loop)/bin/freebsd-version vt_userland_ver if regexp "\"13\.[0-9]-" "$vt_userland_ver"; then @@ -307,14 +374,18 @@ function ventoy_freebsd_proc { fi unset vt_unix_mod_path - for file in "/COPYRIGHT" "/FreeNAS-MANIFEST" "/version"; do + for file in "/COPYRIGHT" "/FreeNAS-MANIFEST" "/version" "/etc/fstab"; do if [ -e (loop)${file} ]; then set vt_unix_mod_path=${file} break fi done - vt_unix_replace_ko $vt_unix_mod_path (vtunix)/ventoy_unix/FreeBSD/geom_ventoy_ko/$vt_freebsd_ver/$vt_freebsd_bit/geom_ventoy.ko.xz + if [ -e (loop)/usr/freebsd-dist/cloninst.sh ]; then + set vtFreeBsdDistro=ClonOS + fi + + vt_unix_replace_ko $vt_unix_mod_path (vtunix)/ventoy_unix/$vtFreeBsdDistro/geom_ventoy_ko/$vt_freebsd_ver/$vt_freebsd_bit/geom_ventoy.ko.xz vt_unix_replace_conf FreeBSD ${1}${chosen_path} } @@ -371,6 +442,7 @@ function uefi_windows_menu_func { ventoy_debug_pause if [ -n "$vtoy_chain_mem_addr" ]; then + ventoy_acpi_param ${vtoy_chain_mem_addr} 2048 ventoy_cli_console chainloader ${vtoy_path}/ventoy_x64.efi env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size} boot @@ -381,6 +453,7 @@ function uefi_windows_menu_func { } function uefi_linux_menu_func { + if [ "$ventoy_compatible" = "NO" ]; then if [ "$ventoy_fs_probe" = "udf" ]; then @@ -413,6 +486,7 @@ function uefi_linux_menu_func { distro_specify_initrd_file vt_linux_initrd_count vtcount + if [ $vtcount -eq 0 ]; then distro_specify_initrd_file_phase2 @@ -431,21 +505,41 @@ function uefi_linux_menu_func { if [ -d (loop)/arch ]; then if [ -f (loop)/arch/boot/x86_64/archiso.img ]; then vt_add_replace_file $vtindex "EFI\\archiso\\archiso.img" + elif [ -f (loop)/arch/boot/x86_64/initramfs-linux.img ]; then + vt_add_replace_file $vtindex "arch\\boot\\x86_64\\initramfs-linux.img" elif [ -f (loop)/boot/initramfs_x86_64.img ]; then vt_add_replace_file $vtindex "boot\\initramfs_x86_64.img" fi + elif [ -d (loop)/blackarch ]; then + if [ -f (loop)/blackarch/boot/x86_64/archiso.img ]; then + vt_add_replace_file $vtindex "EFI\\archiso\\archiso.img" + fi + elif [ -d (loop)/parabola ]; then + if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then + vt_add_replace_file $vtindex "EFI\\parabolaiso\\parabolaiso.img" + fi elif [ -f (loop)/EFI/BOOT/initrd.gz ]; then vt_add_replace_file $vtindex "EFI\\BOOT\\initrd.gz" elif [ -f (loop)/loader/entries/thinstation.conf ]; then vt_add_replace_file $vtindex "boot\\initrd" + elif [ -f (loop)/loader/entries/pisi-efi-x86_64.conf ]; then + vt_add_replace_file $vtindex "EFI\\pisi\\initrd.img" fi elif [ -d (loop)/EFI/boot/entries ]; then + if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then + vt_add_replace_file 0 "EFI\\parabolaiso\\parabolaiso.img" + elif [ -f (loop)/hyperbola/boot/x86_64/hyperiso.img ]; then + vt_add_replace_file 0 "EFI\\hyperiso\\hyperiso.img" + fi + elif [ -d (loop)/EFI/BOOT/entries ]; then if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then vt_add_replace_file 0 "EFI\\parabolaiso\\parabolaiso.img" fi elif [ -e (loop)/syslinux/alt0/full.cz ]; then vt_add_replace_file 0 "EFI\\BOOT\\full.cz" set FirstTryBootFile='@EFI@BOOT@grubx64.efi' + + fi fi @@ -453,6 +547,7 @@ function uefi_linux_menu_func { vt_linux_chain_data ${1}${chosen_path} if [ -n "$vtoy_chain_mem_addr" ]; then + ventoy_acpi_param ${vtoy_chain_mem_addr} 2048 ventoy_cli_console chainloader ${vtoy_path}/ventoy_x64.efi env_param=${env_param} isoefi=${LoadIsoEfiDriver} FirstTry=${FirstTryBootFile} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size} boot @@ -466,6 +561,7 @@ function uefi_unix_menu_func { ventoy_unix_comm_proc $1 ${chosen_path} if [ -n "$vtoy_chain_mem_addr" ]; then + ventoy_acpi_param ${vtoy_chain_mem_addr} 2048 ventoy_cli_console chainloader ${vtoy_path}/ventoy_x64.efi env_param=${env_param} isoefi=${LoadIsoEfiDriver} FirstTry=${FirstTryBootFile} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size} boot @@ -518,7 +614,7 @@ function uefi_iso_menu_func { elif vt_check_mode 1; then set ventoy_compatible=YES else - vt_check_compatible (loop) + vt_check_compatible (loop) fi vt_img_sector ${1}${chosen_path} @@ -577,7 +673,8 @@ function legacy_windows_menu_func { ventoy_debug_pause if [ -n "$vtoy_chain_mem_addr" ]; then - linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} ibft mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size} + ventoy_acpi_param ${vtoy_chain_mem_addr} 2048 + linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} ibft mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size} boot else echo "chain empty failed" @@ -627,6 +724,10 @@ function legacy_linux_menu_func { vt_linux_initrd_count vtcount if [ $vtcount -eq 0 ]; then + if [ -d (loop)/rancheros ]; then + vt_linux_parse_initrd_isolinux (loop)/boot/ /boot/isolinux/ + fi + distro_specify_initrd_file_phase2 fi @@ -637,6 +738,7 @@ function legacy_linux_menu_func { ventoy_debug_pause if [ -n "$vtoy_chain_mem_addr" ]; then + ventoy_acpi_param ${vtoy_chain_mem_addr} 2048 linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size} boot else @@ -650,6 +752,7 @@ function legacy_unix_menu_func { ventoy_unix_comm_proc $1 ${chosen_path} if [ -n "$vtoy_chain_mem_addr" ]; then + #ventoy_acpi_param ${vtoy_chain_mem_addr} 2048 linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size} boot else @@ -745,9 +848,14 @@ function ventoy_iso_busybox_ver { #special process for deepin-live iso if [ "$vt_chosen_size" = "403701760" ]; then - if vt_str_begin $vt_chosen_path "/deepin-live"; then + if vt_str_str $vt_chosen_path "/deepin-live"; then set ventoy_busybox_ver=64 fi + elif vt_str_begin $vt_volume_id "PHOTON_"; then + set ventoy_busybox_ver=64 + elif vt_str_begin $vt_volume_id "smgl-test-quinq-x86_64"; then + set ventoy_busybox_ver=64 + fi } @@ -763,6 +871,8 @@ function iso_common_menuentry { #special process for Endless OS if vt_str_begin $vt_volume_id "Endless-OS"; then iso_endless_os_proc $vtoy_iso_part $vt_chosen_path + elif vt_str_begin $vt_volume_id "TENS-Public"; then + set vtcompat=1 fi if [ "$grub_platform" = "pc" ]; then @@ -780,6 +890,21 @@ function iso_common_menuentry { fi } +function miso_common_menuentry { + vt_chosen_img_path vt_chosen_path vt_chosen_size + + echo "memdisk mode boot for $vt_chosen_path" + echo "" + ventoy_debug_pause + + if [ "$grub_platform" = "pc" ]; then + legacy_iso_memdisk $vtoy_iso_part $vt_chosen_path + else + uefi_iso_memdisk $vtoy_iso_part $vt_chosen_path + fi +} + + function common_unsupport_menuentry { echo -e "\n The name of the iso file could NOT contain space or non-ascii characters. \n" echo -e " 文件名中不能有中文或空格 \n" @@ -787,6 +912,10 @@ function common_unsupport_menuentry { read vtInputKey } +function miso_unsupport_menuentry { + common_unsupport_menuentry +} + function iso_unsupport_menuentry { common_unsupport_menuentry } @@ -799,7 +928,7 @@ function wim_common_menuentry { if [ -n "$vtoy_chain_mem_addr" ]; then if [ "$grub_platform" = "pc" ]; then - linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size} + linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size} else ventoy_cli_console chainloader ${vtoy_path}/ventoy_x64.efi env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size} @@ -823,9 +952,18 @@ function efi_common_menuentry { ventoy_debug_pause - ventoy_cli_console - chainloader ${vtoy_path}/ventoy_x64.efi memdisk env_param=${env_param} isoefi=on ${vtdebug_flag} mem:${vtoy_iso_buf_addr}:size:${vtoy_iso_buf_size} + ventoy_cli_console + + unset vtoy_dotefi_retry + chainloader ${vtoy_path}/ventoy_x64.efi memdisk env_param=${env_param} dotefi isoefi=on ${vtdebug_flag} mem:${vtoy_iso_buf_addr}:size:${vtoy_iso_buf_size} boot + + if [ -n "$vtoy_dotefi_retry" ]; then + unset vtoy_dotefi_retry + chainloader ${vtoy_iso_part}${vt_chosen_path} + boot + fi + ventoy_gui_console } @@ -833,20 +971,365 @@ function efi_unsupport_menuentry { common_unsupport_menuentry } +function vhd_common_menuentry { -function ventoy_img_busybox_ver { - set ventoy_busybox_ver=32 + if [ "$VTOY_VHD_NO_WARNING" != "1" ]; then + if [ "$vtoy_iso_fs" != "ntfs" ]; then + echo -e "!!! WARNING !!!\n" + echo -e "\nPartition1 ($vtoy_iso_fs) is NOT ntfs, the VHD(x) file may not boot normally \n" + echo -e "\nVHD(x) 文件所在分区不是 ntfs 格式, 可能无法正常启动 \n\n" + echo -n "press ENTER to continue boot (请按 回车 键继续) ..." + read vtInputKey + fi + fi + + vt_chosen_img_path vt_chosen_path vt_chosen_size + vt_patch_vhdboot $vt_chosen_path - if [ -e (vtimghd,2)/etc/openwrt_release ]; then - if vt_file_strstr (vtimghd,2)/etc/openwrt_release x86_64; then - set ventoy_busybox_ver=64 + ventoy_debug_pause + + if [ -n "$vtoy_vhd_buf_addr" ]; then + if [ "$grub_platform" = "pc" ]; then + linux16 $vtoy_path/memdisk iso raw + initrd16 mem:${vtoy_vhd_buf_addr}:size:${vtoy_vhd_buf_size} + boot + else + ventoy_cli_console + chainloader ${vtoy_path}/ventoy_x64.efi memdisk env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_vhd_buf_addr}:size:${vtoy_vhd_buf_size} + boot + ventoy_gui_console + fi + else + echo "Please put the right ventoy_vhdboot.img file to the 1st partition" + ventoy_pause + fi +} + +function vhd_unsupport_menuentry { + common_unsupport_menuentry +} + +function vtoyboot_common_func { + set AltBootPart=0 + set vtoysupport=0 + + vt_get_vtoy_type ${1} vtoytype parttype AltBootPart + + if vt_str_begin $vtoytype vhd; then + set vtoysupport=1 + elif [ "$vtoytype" = "raw" ]; then + set vtoysupport=1 + elif [ "$vtoytype" = "vdi" ]; then + set vtoysupport=1 + fi + + if [ $vtoysupport -eq 1 ]; then + if [ "$grub_platform" = "pc" ]; then + if [ "$parttype" = "gpt" -a $AltBootPart -eq 0 ]; then + echo "The OS in the vdisk was created in UEFI mode, but current is Legacy BIOS mode." + echo "虚拟磁盘内的系统是在UEFI模式下创建的，而当前系统是Legacy BIOS模式，可能无法正常启动。" + ventoy_pause + fi + else + if [ "$parttype" = "mbr" -a $AltBootPart -eq 0 ]; then + echo "The OS in the vdisk was created in Legacy BIOS mode, but current is UEFI mode." + echo "虚拟磁盘内的系统是在Legacy BIOS模式下创建的，而当前系统是UEFI模式，可能无法正常启动。" + ventoy_pause + fi fi - fi + + vt_img_sector ${1} + vt_raw_chain_data ${1} + + ventoy_debug_pause + + if [ -n "$vtoy_chain_mem_addr" ]; then + if [ "$grub_platform" = "pc" ]; then + vt_acpi_param ${vtoy_chain_mem_addr} 512 + linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} bios80 sector512 mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size} + boot + else + ventoy_acpi_param ${vtoy_chain_mem_addr} 512 + ventoy_cli_console + chainloader ${vtoy_path}/ventoy_x64.efi sector512 env_param=${ventoy_env_param} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size} + boot + ventoy_gui_console + fi + else + echo "chain empty failed!" + ventoy_pause + fi + else + echo "Unsupported vtoy type $vtoytype" + ventoy_pause + fi +} + +function vtoy_common_menuentry { + vt_chosen_img_path vt_chosen_path vt_chosen_size + vtoyboot_common_func ${vtoy_iso_part}${vt_chosen_path} +} + +function vtoy_unsupport_menuentry { + common_unsupport_menuentry +} + +# +#============================================================# +# IMG file boot process # +#============================================================# +# + + +function ventoy_img_easyos { + vt_load_cpio $vtoy_path/ventoy.cpio ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver" + vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit + + loopback easysfs (vtimghd,1)/easy.sfs + vt_get_lib_module_ver (easysfs) /lib/modules/ vt_module_ver + + if [ -n "$vt_module_ver" ]; then + for mod in "kernel/drivers/md/dm-mod.ko" "kernel/drivers/dax/dax.ko"; do + vt_img_extra_initrd_append (easysfs)/lib/modules/$vt_module_ver/$mod + done + fi + + ventoy_debug_pause + + #boot image file + vt_set_boot_opt rdinit=/vtoy/vtoy + vt_img_hook_root + + syslinux_configfile (vtimghd,1)/syslinux.cfg + + vt_img_unhook_root + vt_unset_boot_opt + loopback -d easysfs +} + +function ventoy_img_volumio { + vt_load_cpio $vtoy_path/ventoy.cpio ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver" + vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit + + ventoy_debug_pause + + #boot image file + vt_set_boot_opt rdinit=/vtoy/vtoy imgpart=/dev/ventoy2 bootpart=/dev/ventoy1 + vt_img_hook_root + + syslinux_configfile (vtimghd,1)/syslinux.cfg + + vt_img_unhook_root + vt_unset_boot_opt +} + +function ventoy_img_openelec { + elec_ver=$1 + + vt_load_cpio $vtoy_path/ventoy.cpio ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver" + vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit + + loopback vtloopex $vtoy_efi_part/ventoy/vtloopex.cpio + vt_img_extra_initrd_append (vtloopex)/$elec_ver/vtloopex.tar.xz + + ventoy_debug_pause + + #boot image file + vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=$elec_ver + vt_img_hook_root + + set root=(vtimghd,1) + syslinux_configfile (vtimghd,1)/syslinux.cfg + + vt_img_unhook_root + vt_unset_boot_opt + loopback -d vtloopex +} + + +function ventoy_img_freedombox { + vt_load_cpio $vtoy_path/ventoy.cpio ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver" + vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit + + vt_get_lib_module_ver (vtimghd,1) /lib/modules/ vt_module_ver + if [ -n "$vt_module_ver" ]; then + vt_img_extra_initrd_append (vtimghd,1)/lib/modules/$vt_module_ver/kernel/drivers/md/dm-mod.ko + fi + + ventoy_debug_pause + + #boot image file + vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=freedombox + vt_img_hook_root + + configfile (vtimghd,1)/boot/grub/grub.cfg + + vt_img_unhook_root + vt_unset_boot_opt +} + +function ventoy_img_paldo { + vt_load_cpio $vtoy_path/ventoy.cpio ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver" + vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit + + ventoy_debug_pause + + #boot image file + vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=paldo + vt_img_hook_root + + vt_fs_enum_1st_file (vtimghd,1) /loader/entries/ vt_paldo_entry_conf + vt_file_basename $vt_paldo_entry_conf vtPaldoVer + + echo loading file... + linux (vtimghd,1)/linux-${vtPaldoVer} root=/dev/ventoy1 rootfstype=vfat + initrd (vtimghd,1)/initramfs-${vtPaldoVer} + boot + + vt_img_unhook_root + vt_unset_boot_opt +} + +function ventoy_img_ubos { + vt_load_cpio $vtoy_path/ventoy.cpio ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver" + vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit + + vt_get_lib_module_ver (vtimghd,3) /lib/modules/ vt_module_ver + if [ -n "$vt_module_ver" ]; then + vt_img_extra_initrd_append (vtimghd,3)/lib/modules/$vt_module_ver/kernel/drivers/md/dm-mod.ko.xz + fi + + ventoy_debug_pause + + #boot image file + vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=ubos + vt_img_hook_root + + echo loading file... + linux (vtimghd,2)/vmlinuz-linux root=/dev/ventoy3 rw + initrd (vtimghd,2)/initramfs-linux.img + boot + + vt_img_unhook_root + vt_unset_boot_opt +} + +function ventoy_img_recalbox { + vt_load_cpio $vtoy_path/ventoy.cpio ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver" + vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit + + ventoy_debug_pause + + #boot image file + vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=recalbox + vt_img_hook_root + + set root=(vtimghd,1) + configfile (vtimghd,1)/boot/grub/grub.cfg + + vt_img_unhook_root + vt_unset_boot_opt +} + +function ventoy_img_batocera { + vt_load_cpio $vtoy_path/ventoy.cpio ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver" + vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit + + ventoy_debug_pause + + #boot image file + vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=batocera + vt_img_hook_root + + set root=(vtimghd,1) + syslinux_configfile (vtimghd,1)/boot/syslinux/syslinux.cfg + + vt_img_unhook_root + vt_unset_boot_opt +} + +function ventoy_img_memtest86 { + chainloader (vtimghd,1)/efi/boot/BOOTX64.efi + boot +} + +function img_unsupport_tip { + echo -e "\n This IMG file is NOT supported now. \n" + echo -e " 当前不支持启动此 IMG 文件 \n" + echo -e "\npress ENTER to exit (请按 回车 键返回) ..." + read vtInputKey } function img_common_menuentry { + set ventoy_compatible=YES + set ventoy_busybox_ver=32 - echo "To be implement" + vt_chosen_img_path vt_chosen_path vt_chosen_size + + if [ -d (vtimghd)/ ]; then + loopback -d vtimghd + fi + + loopback vtimghd ${vtoy_iso_part}${vt_chosen_path} + vt_img_sector ${vtoy_iso_part}${vt_chosen_path} + + vt_img_part_info (vtimghd) + + set vtback_root=$root + ventoy_cli_console + vt_push_last_entry + + vt_img_extra_initrd_reset + + vt_get_fs_label (vtimghd,1) vtImgHd1Label + if [ -d (vtimghd,2)/lib ]; then + vt_get_fs_label (vtimghd,2) vtImgHd2Label + fi + + if [ -e (vtimghd,1)/etc/hostname ]; then + vt_1st_line (vtimghd,1)/etc/hostname vtImgHostname + fi + + if [ -e (vtimghd,1)/easy.sfs ]; then + ventoy_img_easyos + elif [ -e (vtimghd,1)/volumio.initrd ]; then + ventoy_img_volumio + elif vt_str_begin $vtImgHd1Label "LAKKA"; then + ventoy_img_openelec lakka + elif vt_str_begin $vtImgHd1Label "LIBREELEC"; then + ventoy_img_openelec LibreELEC + elif vt_str_begin $vtImgHd1Label "paldo-live"; then + ventoy_img_paldo + elif vt_str_begin $vtImgHostname "freedombox"; then + ventoy_img_freedombox + elif vt_str_begin $vtImgHd1Label "BATOCERA"; then + ventoy_img_batocera + elif [ "$vtImgHd2Label" = "RECALBOX" ]; then + ventoy_img_recalbox + elif [ -f (vtimghd,2)/loader/entries/ubos.conf ]; then + ventoy_img_ubos + elif [ -f (vtimghd,1)/efi/boot/mt86.png ]; then + if [ "$grub_platform" = "pc" ]; then + img_unsupport_tip + else + ventoy_img_memtest86 + fi + else + vt_linux_chain_data ${vtoy_iso_part}${vt_chosen_path} + ventoy_acpi_param ${vtoy_chain_mem_addr} 512 + if [ "$grub_platform" = "pc" ]; then + linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} sector512 mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size} + boot + else + chainloader ${vtoy_path}/ventoy_x64.efi sector512 env_param=${env_param} isoefi=${LoadIsoEfiDriver} FirstTry=${FirstTryBootFile} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size} + boot + fi + fi + + set root=$vtback_root + vt_pop_last_entry + ventoy_gui_console + set ventoy_compatible=NO } function img_unsupport_menuentry { @@ -861,7 +1344,10 @@ function img_unsupport_menuentry { ############################################################# ############################################################# -set VENTOY_VERSION="1.0.18" +set VENTOY_VERSION="1.0.25" + +#ACPI not compatible with Window7/8, so disable by default +set VTOY_PARAM_NO_ACPI=1 # Default menu display mode, you can change it as you want. # 0: List mode @@ -888,9 +1374,10 @@ vt_device $root vtoy_dev if [ "$vtoy_dev" = "tftp" ]; then set vtoy_path=($root) for vtid in 0 1 2 3; do - if [ -d (hd$vtid,2)/ventoy ]; then + if [ -f (hd$vtid,2)/ventoy/ventoy.cpio ]; then set vtoy_iso_part=(hd$vtid,1) set vtoy_efi_part=(hd$vtid,2) + set vtoydev=hd$vtid break fi done @@ -909,12 +1396,15 @@ else set vtoy_path=($root)/ventoy fi + set vtoydev=$vtoy_dev set vtoy_iso_part=($vtoy_dev,1) set vtoy_efi_part=($vtoy_dev,2) loadfont unicode set vt_plugin_path=$vtoy_iso_part fi +#Load Partition Table +vt_load_part_table $vtoydev #Load Plugin if [ -f $vtoy_iso_part/ventoy/ventoy.json ]; then @@ -933,22 +1423,31 @@ elif [ -f $vtoy_efi_part/ventoy/ventoy_wimboot.img ]; then vt_load_wimboot $vtoy_efi_part/ventoy/ventoy_wimboot.img fi +if [ -f $vtoy_iso_part/ventoy/ventoy_vhdboot.img ]; then + vt_load_vhdboot $vtoy_iso_part/ventoy/ventoy_vhdboot.img +elif [ -f $vtoy_efi_part/ventoy/ventoy_vhdboot.img ]; then + vt_load_vhdboot $vtoy_efi_part/ventoy/ventoy_vhdboot.img +fi + if [ $VTOY_DEFAULT_MENU_MODE -eq 0 ]; then set VTOY_F3_CMD="vt_dynamic_menu 1 1" - set VTOY_HOTKEY_TIP="F1:Memdisk F2:Power F3:TreeView F4:Localboot F5:Debug F6:ExMenu" + set VTOY_HOTKEY_TIP="F1:Memdisk F2:Power F3:TreeView F4:Localboot F5:Tools F6:ExMenu" else set VTOY_F3_CMD="vt_dynamic_menu 1 0" - set VTOY_HOTKEY_TIP="F1:Memdisk F2:Power F3:ListView F4:Localboot F5:Debug F6:ExMenu" + set VTOY_HOTKEY_TIP="F1:Memdisk F2:Power F3:ListView F4:Localboot F5:Tools F6:ExMenu" fi if [ -n "$vtoy_gfxmode" ]; then set gfxmode=$vtoy_gfxmode + set gfxpayload=keep else - set gfxmode=1920x1080,1366x768,1024x768 + set gfxmode=1024x768 + set gfxpayload=keep fi + if [ "$vtoy_display_mode" = "CLI" ]; then terminal_output console elif [ "$vtoy_display_mode" = "serial" ]; then @@ -975,12 +1474,14 @@ fi #export necessary variable export theme export gfxmode -export vtoy_dev +export gfxpayload +export vtoydev +export vtoy_path +export vtdebug_flag export vtoy_iso_part export vtoy_efi_part export VENTOY_VERSION - - +export VTOY_CUR_VIDEO_MODE #colect all image files (iso files)