X-Git-Url: https://glassweightruler.freedombox.rocks/gitweb/Ventoy.git/blobdiff_plain/4bf43ab9d4e6b724836724c1d514760d164df79a..44ff3dd8d4bd8152368e6d2da8b8ff3feabfbca6:/Plugson/www/plugson_control.html diff --git a/Plugson/www/plugson_control.html b/Plugson/www/plugson_control.html index 6c39190..8cfbfcb 100644 --- a/Plugson/www/plugson_control.html +++ b/Plugson/www/plugson_control.html @@ -1,6 +1,6 @@
-
+
  

全局控制插件

@@ -10,6 +10,10 @@
+
+ +
+
官网文档
@@ -61,15 +65,17 @@ 选项说明 指定搜索ISO文件的根目录。默认Ventoy会搜索U盘上的所有目录和子目录，当你U盘上有海量的文件时，这个过程会很慢。
- 这种情况下你可以把ISO文件单独放在某个目录下，然后通过这个变量来指定搜索路径，此时Ventoy就只会搜索该目录及其子目录。 + 这种情况下你可以把ISO文件单独放在某个子目录下，然后通过这个变量来指定搜索路径，此时Ventoy就只会搜索该目录及其子目录。
+ 注意这里不能设置为U盘根目录，必须为一个子目录。 Option Description The root path where to search the image files. By default, Ventoy will search all the directories and subdirectories in the USB. This will be very slow when you have huge number of files in the USB. - In this case, you can put all the image files in one directory and use this to specify the search path. - After that Ventoy will only search this directory and its subdirectories for image files. + In this case, you can put all the image files in one subdirectory and use this to specify the search path. + After that Ventoy will only search this directory and its subdirectories for image files.
+ Note: the path must not be the mountpoint of the first partition, but a subdirectory. @@ -115,7 +121,7 @@ Option Description - 0 Don not bypass Windows 11 hardware check.
+ 0 Do not bypass Windows 11 hardware check.
1 Bypass Windows 11 hardware check.

This option only avaliable for standard Windows 11 ISO files. When set to 1, Ventoy will create the following registries to bypass Windows 11 hardware check when install.
@@ -337,6 +343,179 @@
+ +
+
+

VTOY_LINUX_REMOUNT + —— Linux 启动后继续访问ISO文件所在分区

+
+ +
+
+
+ + + + + + + + + + + + + +
选项设置 +      + +
选项说明 + 0 Linux启动后不需要继续访问ISO文件所在的分区。
+ 1 Linux启动后需要继续访问ISO文件所在的分区。

+ 该选项只对 Linux 系统镜像有效。
+ 默认情况下，受Linux内核相关功能的限制，对于Linux系统，在启动后无法继续访问ISO文件所在的分区。在mount的时候会提示 device busy。
+ 如果这里选择 1，则 Ventoy 会尝试通过一些特殊的手段绕过内核的这个限制，但是这个功能是实验性质的，没有经过大规模和长时间的验证。 +
Option Description + 0 I don't need to access the image partition after boot.
+ 1 I need to access the image partition after boot.

+ This option is only avaliable for Linux distro image files.
+ + By default, the image partition where the ISO files locate can not be accessed after boot. When you try to mount it you will get device busy error. + This is due to linux kernel restriction (device-mapper module).
+ If you select 1 here, Ventoy will try to bypass the restriction with some special mechanism.
+ But it should be noted that, this is an experimental feature and is not fully tested. + +
+
+
+ + + +
+
+

VTOY_SECONDARY_BOOT_MENU + —— 二级启动菜单显示开关

+
+ +
+
+
+ + + + + + + + + + + + + +
选项设置 +      + +
选项说明二级启动菜单控制开关 + 0 不显示    + 1 显示 +
Option Description + Secondary boot menu display option + 0 Don't display     + 1 Display +
+
+
+ + +
+
+

VTOY_SHOW_PASSWORD_ASTERISK + —— 输入密码时显示星号

+
+ +
+
+
+ + + + + + + + + + + + + +
选项设置 +      + +
选项说明输入密码时是否显示星号 + 0 不显示    + 1 显示 +
Option Description + Display asterisk when typing password + 0 Don't display     + 1 Display +
+
+
+ + + +
+
+

VTOY_SECONDARY_TIMEOUT + —— 二级启动菜单倒计时

+
+ +
+
+
+ + + + + + + + + + + + + +
选项设置 +
+ +
+
选项说明 + 二级菜单倒计时（秒）。只有当 VTOY_SECONDARY_BOOT_MENU 设置为1时才有效。
+ 默认不设置，设置之后，比如设置为10，则在倒计时10秒之后，会自动选择第一项，即：Boot in normal mode
+ 在倒计时的过程中按任意键会停止倒计时，等待用户操作。 +
Option Description + Timeout seconds for the secondary boot menu. Only take effect when VTOY_SECONDARY_BOOT_MENU is 1.
+ By default no timeout is set. When you set it to 10 for example, the first entry (Boot in normal mode) will be selected an run after 10 seconds. +
+
+
+ +
@@ -853,12 +1032,13 @@
- +