X-Git-Url: https://glassweightruler.freedombox.rocks/gitweb/Ventoy.git/blobdiff_plain/58a93cdb4082bb42366c480890705d9786602b4a..2283c3e8b0debf84bddc47c27fd79e259eccc8a2:/INSTALL/grub/grub.cfg

diff --git a/INSTALL/grub/grub.cfg b/INSTALL/grub/grub.cfg
index 33789ac..bafba8d 100644
--- a/INSTALL/grub/grub.cfg
+++ b/INSTALL/grub/grub.cfg
@@ -44,11 +44,18 @@ function ventoy_gui_console {
     fi    
 }
 
+function ventoy_acpi_param {  
+    if [ "$VTOY_PARAM_NO_ACPI" != "1" ]; then
+        vt_acpi_param $1 $2
+    fi
+}
+
 function ventoy_power {
     configfile $prefix/power.cfg
 }
 
-function ventoy_diagnosis {    
+function ventoy_diagnosis {
+    vt_enum_video_mode    
     configfile $prefix/debug.cfg
 }
 
@@ -173,14 +180,28 @@ function distro_specify_initrd_file {
         vt_linux_specify_initrd_file /pmagic/initrd.img
     elif [ -e (loop)/boot/initrd.xz ]; then
         vt_linux_specify_initrd_file /boot/initrd.xz
+    elif [ -e (loop)/boot/initrd.gz ]; then
+        vt_linux_specify_initrd_file /boot/initrd.gz
     elif [ -f (loop)/boot/initrd ]; then
         vt_linux_specify_initrd_file /boot/initrd
     elif [ -f (loop)/boot/x86_64/loader/initrd ]; then
         vt_linux_specify_initrd_file /boot/x86_64/loader/initrd
     elif [ -f (loop)/boot/initramfs-x86_64.img ]; then
         vt_linux_specify_initrd_file /boot/initramfs-x86_64.img
-        
+    elif [ -f (loop)/boot/isolinux/initramfs_data64.cpio.gz ]; then 
+        vt_linux_specify_initrd_file /boot/isolinux/initramfs_data64.cpio.gz
 
+        
+    fi
+    
+    if [ -f (loop)/isolinux/initrd.gz ]; then 
+        vt_linux_specify_initrd_file /isolinux/initrd.gz
+    fi
+    
+    if [ "$vt_chosen_size" = "1133375488" ]; then
+        if [ -d (loop)/boot/grub/x86_64-efi ]; then
+            vt_cpio_busybox64
+        fi
     fi
 }
 
@@ -224,8 +245,31 @@ function distro_specify_initrd_file_phase2 {
         vt_linux_specify_initrd_file /initrd
     elif [ -f (loop)/live/initrd1 ]; then 
         vt_linux_specify_initrd_file /live/initrd1
+    elif [ -f (loop)/isolinux/initrd.img ]; then 
+        vt_linux_specify_initrd_file /isolinux/initrd.img
+    elif [ -f (loop)/isolinux/initrd.gz ]; then 
+        vt_linux_specify_initrd_file /isolinux/initrd.gz
+    elif [ -f (loop)/syslinux/kernel/initramfs.gz ]; then 
+        vt_linux_specify_initrd_file /syslinux/kernel/initramfs.gz    
     elif vt_strstr $vt_volume_id "Daphile"; then
         vt_linux_parse_initrd_isolinux   (loop)/isolinux/
+    elif [ -f (loop)/boot/rootfs.xz ]; then 
+        vt_linux_specify_initrd_file /boot/rootfs.xz
+        if [ "$grub_platform" != "pc" ]; then
+            vt_add_replace_file 0 "minimal\\x86_64\\rootfs.xz"
+        fi
+    elif [ -f (loop)/arch/boot/x86_64/archiso.img ]; then 
+        vt_linux_specify_initrd_file /arch/boot/x86_64/archiso.img
+        if [ "$grub_platform" != "pc" ]; then
+            vt_add_replace_file 0 "EFI\\archiso\\archiso.img"
+        fi
+    elif [ -f (loop)/blackarch/boot/x86_64/archiso.img ]; then 
+        vt_linux_specify_initrd_file /blackarch/boot/x86_64/archiso.img
+        
+    elif [ -f (loop)/install.amd/initrd.gz ]; then
+        vt_linux_specify_initrd_file /live/initrd2.img
+        vt_linux_specify_initrd_file /install.amd/initrd.gz
+        vt_linux_specify_initrd_file /install.amd/gtk/initrd.gz
         
     fi
 }
@@ -263,7 +307,13 @@ function ventoy_get_freenas_ver {
     fi
 }
 
+function ventoy_get_midnightbsd_ver {   
+    set vt_freebsd_ver=11.x
+}
+
 function ventoy_freebsd_proc {
+    set vtFreeBsdDistro=FreeBSD
+
     if vt_strstr "$vt_volume_id" "GHOSTBSD"; then
         ventoy_get_ghostbsd_ver $1 ${chosen_path}
     elif vt_strstr "$vt_volume_id" "FREENAS"; then
@@ -280,6 +330,9 @@ function ventoy_freebsd_proc {
         set vt_freebsd_ver=10.x
     elif regexp "^9_[0-9]" "$vt_volume_id"; then
         set vt_freebsd_ver=9.x
+    elif [ -d (loop)/usr/midnightbsd-dist ]; then
+        ventoy_get_midnightbsd_ver $1 ${chosen_path}
+        set vtFreeBsdDistro=MidnightBSD
     elif [ -e (loop)/bin/freebsd-version ]; then
         vt_unix_parse_freebsd_ver (loop)/bin/freebsd-version vt_userland_ver
         if regexp "\"13\.[0-9]-" "$vt_userland_ver"; then
@@ -334,7 +387,11 @@ function ventoy_freebsd_proc {
         fi
     done
     
-    vt_unix_replace_ko $vt_unix_mod_path (vtunix)/ventoy_unix/FreeBSD/geom_ventoy_ko/$vt_freebsd_ver/$vt_freebsd_bit/geom_ventoy.ko.xz
+    if [ -e (loop)/usr/freebsd-dist/cloninst.sh ]; then
+        set vtFreeBsdDistro=ClonOS
+    fi
+    
+    vt_unix_replace_ko $vt_unix_mod_path (vtunix)/ventoy_unix/$vtFreeBsdDistro/geom_ventoy_ko/$vt_freebsd_ver/$vt_freebsd_bit/geom_ventoy.ko.xz
     vt_unix_replace_conf FreeBSD ${1}${chosen_path} 
 }
 
@@ -391,6 +448,7 @@ function uefi_windows_menu_func {
     ventoy_debug_pause
     
     if [ -n "$vtoy_chain_mem_addr" ]; then
+        ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
         ventoy_cli_console
         chainloader ${vtoy_path}/ventoy_x64.efi  env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
         boot
@@ -401,6 +459,7 @@ function uefi_windows_menu_func {
 }
 
 function uefi_linux_menu_func {
+    
     if [ "$ventoy_compatible" = "NO" ]; then    
         
         if [ "$ventoy_fs_probe" = "udf" ]; then
@@ -433,6 +492,7 @@ function uefi_linux_menu_func {
         distro_specify_initrd_file
         
         vt_linux_initrd_count vtcount
+        
         if [ $vtcount -eq 0 ]; then
             distro_specify_initrd_file_phase2
             
@@ -451,13 +511,25 @@ function uefi_linux_menu_func {
             if [ -d (loop)/arch ]; then
                 if [ -f (loop)/arch/boot/x86_64/archiso.img ]; then
                     vt_add_replace_file $vtindex "EFI\\archiso\\archiso.img"
+                elif [ -f (loop)/arch/boot/x86_64/initramfs-linux.img ]; then
+                    vt_add_replace_file $vtindex "arch\\boot\\x86_64\\initramfs-linux.img"
                 elif [ -f (loop)/boot/initramfs_x86_64.img ]; then
                     vt_add_replace_file $vtindex "boot\\initramfs_x86_64.img"
                 fi
+            elif [ -d (loop)/blackarch ]; then
+                if [ -f (loop)/blackarch/boot/x86_64/archiso.img ]; then
+                    vt_add_replace_file $vtindex "EFI\\archiso\\archiso.img"
+                fi
+            elif [ -d (loop)/parabola ]; then
+                if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then
+                    vt_add_replace_file $vtindex "EFI\\parabolaiso\\parabolaiso.img"
+                fi
             elif [ -f (loop)/EFI/BOOT/initrd.gz ]; then
                 vt_add_replace_file $vtindex "EFI\\BOOT\\initrd.gz"
             elif [ -f (loop)/loader/entries/thinstation.conf ]; then
                 vt_add_replace_file $vtindex "boot\\initrd"
+            elif [ -f (loop)/loader/entries/pisi-efi-x86_64.conf ]; then
+                vt_add_replace_file $vtindex "EFI\\pisi\\initrd.img"
             fi
         elif [ -d (loop)/EFI/boot/entries ]; then
             if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then
@@ -465,9 +537,15 @@ function uefi_linux_menu_func {
             elif [ -f (loop)/hyperbola/boot/x86_64/hyperiso.img ]; then
                 vt_add_replace_file 0 "EFI\\hyperiso\\hyperiso.img"
             fi
+        elif [ -d (loop)/EFI/BOOT/entries ]; then
+            if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then
+                vt_add_replace_file 0 "EFI\\parabolaiso\\parabolaiso.img"
+            fi
         elif [ -e (loop)/syslinux/alt0/full.cz ]; then
             vt_add_replace_file 0 "EFI\\BOOT\\full.cz"            
             set FirstTryBootFile='@EFI@BOOT@grubx64.efi'
+
+
         fi
         
     fi
@@ -475,6 +553,7 @@ function uefi_linux_menu_func {
     vt_linux_chain_data ${1}${chosen_path}
 
     if [ -n "$vtoy_chain_mem_addr" ]; then
+        ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
         ventoy_cli_console       
         chainloader ${vtoy_path}/ventoy_x64.efi  env_param=${env_param} isoefi=${LoadIsoEfiDriver} FirstTry=${FirstTryBootFile} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
         boot
@@ -488,6 +567,7 @@ function uefi_unix_menu_func {
     ventoy_unix_comm_proc $1 ${chosen_path}
     
     if [ -n "$vtoy_chain_mem_addr" ]; then
+        ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
         ventoy_cli_console
         chainloader ${vtoy_path}/ventoy_x64.efi  env_param=${env_param} isoefi=${LoadIsoEfiDriver} FirstTry=${FirstTryBootFile} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
         boot
@@ -540,11 +620,15 @@ function uefi_iso_menu_func {
     elif vt_check_mode 1; then
         set ventoy_compatible=YES
     else
-        vt_check_compatible (loop)
+        vt_check_compatible (loop)        
     fi
     
     vt_img_sector ${1}${chosen_path}
     
+    if [ "$ventoy_fs_probe" = "iso9660" ]; then
+        vt_select_conf_replace ${1} ${chosen_path}
+    fi
+    
     if [ "$vtoy_os" = "Windows" ]; then
         vt_check_compatible_pe (loop)        
         uefi_windows_menu_func  $1 ${chosen_path}
@@ -599,7 +683,8 @@ function legacy_windows_menu_func {
     ventoy_debug_pause    
     
     if [ -n "$vtoy_chain_mem_addr" ]; then
-        linux16   $vtoy_path/ipxe.krn ${vtdebug_flag} ibft mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+        ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
+        linux16   $vtoy_path/ipxe.krn ${vtdebug_flag} ibft mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}        
         boot
     else
         echo "chain empty failed"
@@ -649,6 +734,10 @@ function legacy_linux_menu_func {
         
         vt_linux_initrd_count vtcount
         if [ $vtcount -eq 0 ]; then
+            if [ -d (loop)/rancheros ]; then
+                vt_linux_parse_initrd_isolinux   (loop)/boot/  /boot/isolinux/
+            fi
+
             distro_specify_initrd_file_phase2
         fi
         
@@ -659,6 +748,7 @@ function legacy_linux_menu_func {
     ventoy_debug_pause
     
     if [ -n "$vtoy_chain_mem_addr" ]; then
+        ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
         linux16   $vtoy_path/ipxe.krn ${vtdebug_flag}  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
         boot
     else
@@ -672,6 +762,7 @@ function legacy_unix_menu_func {
     ventoy_unix_comm_proc $1 ${chosen_path}
     
     if [ -n "$vtoy_chain_mem_addr" ]; then
+        #ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
         linux16   $vtoy_path/ipxe.krn ${vtdebug_flag}  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
         boot
     else
@@ -701,7 +792,7 @@ function legacy_iso_menu_func {
     loopback loop ${1}${chosen_path}
     
     get_os_type (loop)
-
+    
     if [ -n "$vtcompat" ]; then
         set ventoy_compatible=YES
         unset vtcompat
@@ -713,6 +804,10 @@ function legacy_iso_menu_func {
     
     vt_img_sector ${1}${chosen_path}
 
+    if [ "$ventoy_fs_probe" = "iso9660" ]; then
+        vt_select_conf_replace ${1} ${chosen_path}
+    fi
+
     if [ "$vtoy_os" = "Windows" ]; then
         vt_check_compatible_pe (loop)        
         legacy_windows_menu_func  $1 ${chosen_path}
@@ -767,9 +862,14 @@ function ventoy_iso_busybox_ver {
     
     #special process for deepin-live iso
     if [ "$vt_chosen_size" = "403701760" ]; then
-        if vt_str_begin $vt_chosen_path "/deepin-live"; then
+        if vt_str_str $vt_chosen_path "/deepin-live"; then
             set ventoy_busybox_ver=64
         fi
+    elif vt_str_begin $vt_volume_id "PHOTON_"; then
+        set ventoy_busybox_ver=64
+    elif vt_str_begin $vt_volume_id "smgl-test-quinq-x86_64"; then
+        set ventoy_busybox_ver=64
+        
     fi
 }
 
@@ -785,6 +885,8 @@ function iso_common_menuentry {
     #special process for Endless OS
     if vt_str_begin $vt_volume_id "Endless-OS"; then
         iso_endless_os_proc $vtoy_iso_part $vt_chosen_path
+    elif vt_str_begin $vt_volume_id "TENS-Public"; then
+        set vtcompat=1
     fi
 
     if [ "$grub_platform" = "pc" ]; then
@@ -802,6 +904,21 @@ function iso_common_menuentry {
     fi      
 }
 
+function miso_common_menuentry {
+    vt_chosen_img_path vt_chosen_path vt_chosen_size
+
+    echo "memdisk mode boot for $vt_chosen_path"
+    echo ""
+    ventoy_debug_pause
+
+    if [ "$grub_platform" = "pc" ]; then
+        legacy_iso_memdisk $vtoy_iso_part $vt_chosen_path
+    else
+        uefi_iso_memdisk $vtoy_iso_part  $vt_chosen_path
+    fi      
+}
+
+
 function common_unsupport_menuentry {
     echo -e "\n The name of the iso file could NOT contain space or non-ascii characters. \n"
     echo -e " 文件名中不能有中文或空格 \n"    
@@ -809,6 +926,10 @@ function common_unsupport_menuentry {
     read vtInputKey
 }
 
+function miso_unsupport_menuentry {
+    common_unsupport_menuentry
+}
+
 function iso_unsupport_menuentry {
     common_unsupport_menuentry
 }
@@ -821,7 +942,7 @@ function wim_common_menuentry {
     
     if [ -n "$vtoy_chain_mem_addr" ]; then
         if [ "$grub_platform" = "pc" ]; then
-            linux16   $vtoy_path/ipxe.krn ${vtdebug_flag}  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+            linux16   $vtoy_path/ipxe.krn ${vtdebug_flag}  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}            
         else
             ventoy_cli_console
             chainloader ${vtoy_path}/ventoy_x64.efi  env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
@@ -845,9 +966,18 @@ function efi_common_menuentry {
     
     ventoy_debug_pause
     
-    ventoy_cli_console    
-    chainloader ${vtoy_path}/ventoy_x64.efi memdisk env_param=${env_param} isoefi=on ${vtdebug_flag} mem:${vtoy_iso_buf_addr}:size:${vtoy_iso_buf_size}
+    ventoy_cli_console
+
+    unset vtoy_dotefi_retry
+    chainloader ${vtoy_path}/ventoy_x64.efi memdisk env_param=${env_param} dotefi isoefi=on ${vtdebug_flag} mem:${vtoy_iso_buf_addr}:size:${vtoy_iso_buf_size}
     boot
+    
+    if [ -n "$vtoy_dotefi_retry" ]; then
+        unset vtoy_dotefi_retry
+        chainloader ${vtoy_iso_part}${vt_chosen_path}
+        boot
+    fi
+    
     ventoy_gui_console
 }
 
@@ -855,6 +985,109 @@ function efi_unsupport_menuentry {
     common_unsupport_menuentry
 }
 
+function vhd_common_menuentry {
+
+    if [ "$VTOY_VHD_NO_WARNING" != "1" ]; then
+        if [ "$vtoy_iso_fs" != "ntfs" ]; then
+            echo -e "!!! WARNING !!!\n"
+            echo -e "\nPartition1 ($vtoy_iso_fs) is NOT ntfs, the VHD(x) file may not boot normally \n"
+            echo -e "\nVHD(x) 文件所在分区不是 ntfs 格式, 可能无法正常启动 \n\n"
+            echo -n "press ENTER to continue boot (请按 回车 键继续) ..."    
+            read vtInputKey
+        fi
+    fi
+
+    vt_chosen_img_path vt_chosen_path vt_chosen_size
+    vt_patch_vhdboot $vt_chosen_path
+    
+    ventoy_debug_pause    
+    
+    if [ -n "$vtoy_vhd_buf_addr" ]; then
+        if [ "$grub_platform" = "pc" ]; then
+            linux16   $vtoy_path/memdisk iso raw    
+            initrd16  mem:${vtoy_vhd_buf_addr}:size:${vtoy_vhd_buf_size}            
+            boot
+        else
+            ventoy_cli_console
+            chainloader ${vtoy_path}/ventoy_x64.efi memdisk env_param=${env_param} isoefi=${LoadIsoEfiDriver} ${vtdebug_flag} mem:${vtoy_vhd_buf_addr}:size:${vtoy_vhd_buf_size}
+            boot
+            ventoy_gui_console
+        fi        
+    else
+        echo "Please put the right ventoy_vhdboot.img file to the 1st partition"
+        ventoy_pause
+    fi
+}
+
+function vhd_unsupport_menuentry {
+    common_unsupport_menuentry
+}
+
+function vtoyboot_common_func {
+    set AltBootPart=0
+    set vtoysupport=0
+    
+    vt_get_vtoy_type ${1} vtoytype parttype AltBootPart
+    
+    if vt_str_begin $vtoytype vhd; then    
+        set vtoysupport=1
+    elif [ "$vtoytype" = "raw" ]; then
+        set vtoysupport=1
+    elif [ "$vtoytype" = "vdi" ]; then
+        set vtoysupport=1
+    fi
+    
+    if [ $vtoysupport -eq 1 ]; then    
+        if [ "$grub_platform" = "pc" ]; then
+            if [ "$parttype" = "gpt" -a $AltBootPart -eq 0 ]; then
+                echo "The OS in the vdisk was created in UEFI mode, but current is Legacy BIOS mode."
+                echo "虚拟磁盘内的系统是在UEFI模式下创建的，而当前系统是Legacy BIOS模式，可能无法正常启动。"
+                ventoy_pause
+            fi
+        else
+            if [ "$parttype" = "mbr" -a $AltBootPart -eq 0 ]; then
+                echo "The OS in the vdisk was created in Legacy BIOS mode, but current is UEFI mode."
+                echo "虚拟磁盘内的系统是在Legacy BIOS模式下创建的，而当前系统是UEFI模式，可能无法正常启动。"
+                ventoy_pause
+            fi
+        fi
+    
+        vt_img_sector ${1}
+        vt_raw_chain_data ${1}
+
+        ventoy_debug_pause
+        
+        if [ -n "$vtoy_chain_mem_addr" ]; then  
+            if [ "$grub_platform" = "pc" ]; then
+                vt_acpi_param ${vtoy_chain_mem_addr} 512
+                linux16 $vtoy_path/ipxe.krn ${vtdebug_flag} bios80  sector512  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}   
+                boot
+            else
+                ventoy_acpi_param ${vtoy_chain_mem_addr} 512
+                ventoy_cli_console
+                chainloader ${vtoy_path}/ventoy_x64.efi sector512 env_param=${ventoy_env_param} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+                boot
+                ventoy_gui_console
+            fi  
+        else
+            echo "chain empty failed!"
+            ventoy_pause
+        fi
+    else
+        echo "Unsupported vtoy type $vtoytype"
+        ventoy_pause
+    fi
+}
+
+function vtoy_common_menuentry {    
+    vt_chosen_img_path vt_chosen_path vt_chosen_size        
+    vtoyboot_common_func ${vtoy_iso_part}${vt_chosen_path}
+}
+
+function vtoy_unsupport_menuentry {
+    common_unsupport_menuentry
+}
+
 #
 #============================================================#
 # IMG file boot process                                      #
@@ -904,10 +1137,147 @@ function ventoy_img_volumio {
     vt_unset_boot_opt
 }
 
+function ventoy_img_openelec {
+    elec_ver=$1
+    
+    vt_load_cpio  $vtoy_path/ventoy.cpio  ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit
+
+    loopback vtloopex $vtoy_efi_part/ventoy/vtloopex.cpio    
+    vt_img_extra_initrd_append  (vtloopex)/$elec_ver/vtloopex.tar.xz
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=$elec_ver
+    vt_img_hook_root
+    
+    set root=(vtimghd,1)
+    syslinux_configfile (vtimghd,1)/syslinux.cfg
+    
+    vt_img_unhook_root
+    vt_unset_boot_opt
+    loopback -d vtloopex
+}
+
+
+function ventoy_img_freedombox {
+    vt_load_cpio  $vtoy_path/ventoy.cpio  ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit
+
+    vt_get_lib_module_ver (vtimghd,1) /lib/modules/ vt_module_ver
+    if [ -n "$vt_module_ver" ]; then        
+        vt_img_extra_initrd_append  (vtimghd,1)/lib/modules/$vt_module_ver/kernel/drivers/md/dm-mod.ko
+    fi
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=freedombox
+    vt_img_hook_root
+    
+    configfile (vtimghd,1)/boot/grub/grub.cfg
+    
+    vt_img_unhook_root
+    vt_unset_boot_opt
+}
+
+function ventoy_img_paldo {
+    vt_load_cpio  $vtoy_path/ventoy.cpio  ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=paldo
+    vt_img_hook_root
+    
+    vt_fs_enum_1st_file (vtimghd,1) /loader/entries/ vt_paldo_entry_conf
+    vt_file_basename $vt_paldo_entry_conf vtPaldoVer
+    
+    echo loading file...
+    linux (vtimghd,1)/linux-${vtPaldoVer} root=/dev/ventoy1 rootfstype=vfat
+    initrd (vtimghd,1)/initramfs-${vtPaldoVer}
+    boot
+    
+    vt_img_unhook_root
+    vt_unset_boot_opt
+}
+
+function ventoy_img_ubos {
+    vt_load_cpio  $vtoy_path/ventoy.cpio  ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit
+
+    vt_get_lib_module_ver (vtimghd,3) /lib/modules/ vt_module_ver
+    if [ -n "$vt_module_ver" ]; then        
+        vt_img_extra_initrd_append  (vtimghd,3)/lib/modules/$vt_module_ver/kernel/drivers/md/dm-mod.ko.xz
+    fi
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=ubos
+    vt_img_hook_root
+    
+    echo loading file...
+    linux (vtimghd,2)/vmlinuz-linux root=/dev/ventoy3 rw
+    initrd (vtimghd,2)/initramfs-linux.img
+    boot
+
+    vt_img_unhook_root
+    vt_unset_boot_opt
+}
+
+function ventoy_img_recalbox {
+    vt_load_cpio  $vtoy_path/ventoy.cpio  ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=recalbox
+    vt_img_hook_root
+    
+    set root=(vtimghd,1)
+    configfile (vtimghd,1)/boot/grub/grub.cfg
+
+    vt_img_unhook_root
+    vt_unset_boot_opt
+}
+
+function ventoy_img_batocera {
+    vt_load_cpio  $vtoy_path/ventoy.cpio  ${vt_chosen_path} ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} ${vt_chosen_path} noinit
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=batocera
+    vt_img_hook_root
+    
+    set root=(vtimghd,1)
+    syslinux_configfile (vtimghd,1)/boot/syslinux/syslinux.cfg
+
+    vt_img_unhook_root
+    vt_unset_boot_opt
+}
+
+function ventoy_img_memtest86 {      
+    chainloader (vtimghd,1)/efi/boot/BOOTX64.efi
+    boot
+}
+
+function img_unsupport_tip {
+    echo -e "\n This IMG file is NOT supported now. \n"
+    echo -e " 当前不支持启动此 IMG 文件 \n"    
+    echo -e "\npress ENTER to exit (请按 回车 键返回) ..."    
+    read vtInputKey 
+}
 
 function img_common_menuentry {
+    set ventoy_compatible=YES
     set ventoy_busybox_ver=32
-    
+
     vt_chosen_img_path vt_chosen_path vt_chosen_size
 
     if [ -d (vtimghd)/ ]; then
@@ -925,24 +1295,55 @@ function img_common_menuentry {
 
     vt_img_extra_initrd_reset
 
-    #vt_get_fs_label (vtimghd,1) vtImgHd1Label
+    vt_get_fs_label (vtimghd,1) vtImgHd1Label
+    if [ -d (vtimghd,2)/lib ]; then
+        vt_get_fs_label (vtimghd,2) vtImgHd2Label
+    fi
+    
+    if [ -e (vtimghd,1)/etc/hostname ]; then
+        vt_1st_line (vtimghd,1)/etc/hostname vtImgHostname
+    fi
     
     if [ -e (vtimghd,1)/easy.sfs ]; then
         ventoy_img_easyos
     elif [ -e (vtimghd,1)/volumio.initrd ]; then
         ventoy_img_volumio
-    
-
+    elif vt_str_begin $vtImgHd1Label "LAKKA"; then
+        ventoy_img_openelec lakka
+    elif vt_str_begin $vtImgHd1Label "LIBREELEC"; then
+        ventoy_img_openelec LibreELEC
+    elif vt_str_begin $vtImgHd1Label "paldo-live"; then
+        ventoy_img_paldo
+    elif vt_str_begin $vtImgHostname "freedombox"; then
+        ventoy_img_freedombox
+    elif vt_str_begin $vtImgHd1Label "BATOCERA"; then
+        ventoy_img_batocera
+    elif [ "$vtImgHd2Label" = "RECALBOX" ]; then
+        ventoy_img_recalbox
+    elif [ -f (vtimghd,2)/loader/entries/ubos.conf ]; then
+        ventoy_img_ubos
+    elif [ -f (vtimghd,1)/efi/boot/mt86.png ]; then 
+        if [ "$grub_platform" = "pc" ]; then
+            img_unsupport_tip
+        else
+            ventoy_img_memtest86            
+        fi
     else
-        echo -e "\n This IMG file is NOT supported now. \n"
-        echo -e " 当前不支持启动此 IMG 文件 \n"    
-        echo -e "\npress ENTER to exit (请按 回车 键返回) ..."    
-        read vtInputKey        
+        vt_linux_chain_data ${vtoy_iso_part}${vt_chosen_path}
+        ventoy_acpi_param ${vtoy_chain_mem_addr} 512
+        if [ "$grub_platform" = "pc" ]; then 
+            linux16 $vtoy_path/ipxe.krn ${vtdebug_flag}  sector512  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}   
+            boot
+        else            
+            chainloader ${vtoy_path}/ventoy_x64.efi sector512 env_param=${env_param} isoefi=${LoadIsoEfiDriver} FirstTry=${FirstTryBootFile} ${vtdebug_flag} mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+            boot
+        fi
     fi
 
     set root=$vtback_root
     vt_pop_last_entry
     ventoy_gui_console
+    set ventoy_compatible=NO
 }
 
 function img_unsupport_menuentry {
@@ -957,7 +1358,10 @@ function img_unsupport_menuentry {
 #############################################################
 #############################################################
 
-set VENTOY_VERSION="1.0.19"
+set VENTOY_VERSION="1.0.27"
+
+#ACPI not compatible with Window7/8, so disable by default
+set VTOY_PARAM_NO_ACPI=1
 
 # Default menu display mode, you can change it as you want.
 #    0: List mode   
@@ -984,16 +1388,17 @@ vt_device $root  vtoy_dev
 if [ "$vtoy_dev" = "tftp" ]; then
     set vtoy_path=($root)
     for vtid in 0 1 2 3; do
-        if [ -d (hd$vtid,2)/ventoy ]; then
+        if [ -f (hd$vtid,2)/ventoy/ventoy.cpio ]; then
             set vtoy_iso_part=(hd$vtid,1)
             set vtoy_efi_part=(hd$vtid,2)
+            set vtoydev=hd$vtid
             break
         fi
     done
     loadfont ascii
 
     if [ -f $vtoy_iso_part/ventoy/ventoy.json ]; then
-       set vt_plugin_path=$vtoy_iso_part
+        set vt_plugin_path=$vtoy_iso_part
     else
         set vt_plugin_path=$prefix
         vt_load_plugin $vt_plugin_path
@@ -1005,12 +1410,15 @@ else
         set vtoy_path=($root)/ventoy
     fi
 
+    set vtoydev=$vtoy_dev
     set vtoy_iso_part=($vtoy_dev,1)
     set vtoy_efi_part=($vtoy_dev,2)
     loadfont unicode
     set vt_plugin_path=$vtoy_iso_part
 fi
 
+#Load Partition Table
+vt_load_part_table $vtoydev
 
 #Load Plugin
 if [ -f $vtoy_iso_part/ventoy/ventoy.json ]; then
@@ -1029,22 +1437,31 @@ elif [ -f $vtoy_efi_part/ventoy/ventoy_wimboot.img ]; then
     vt_load_wimboot $vtoy_efi_part/ventoy/ventoy_wimboot.img
 fi
 
+if [ -f $vtoy_iso_part/ventoy/ventoy_vhdboot.img ]; then
+    vt_load_vhdboot $vtoy_iso_part/ventoy/ventoy_vhdboot.img
+elif [ -f $vtoy_efi_part/ventoy/ventoy_vhdboot.img ]; then
+    vt_load_vhdboot $vtoy_efi_part/ventoy/ventoy_vhdboot.img
+fi
+
 
 if [ $VTOY_DEFAULT_MENU_MODE -eq 0 ]; then
     set VTOY_F3_CMD="vt_dynamic_menu 1 1"
-    set VTOY_HOTKEY_TIP="F1:Memdisk  F2:Power  F3:TreeView  F4:Localboot  F5:Debug  F6:ExMenu"
+    set VTOY_HOTKEY_TIP="F1:Memdisk  F2:Power  F3:TreeView  F4:Localboot  F5:Tools  F6:ExMenu"
 else
     set VTOY_F3_CMD="vt_dynamic_menu 1 0"
-    set VTOY_HOTKEY_TIP="F1:Memdisk  F2:Power  F3:ListView  F4:Localboot  F5:Debug  F6:ExMenu"
+    set VTOY_HOTKEY_TIP="F1:Memdisk  F2:Power  F3:ListView  F4:Localboot  F5:Tools  F6:ExMenu"
 fi
 
 
 if [ -n "$vtoy_gfxmode" ]; then
     set gfxmode=$vtoy_gfxmode
+    set gfxpayload=keep
 else
-    set gfxmode=1920x1080,1366x768,1024x768
+    set gfxmode=1024x768
+    set gfxpayload=keep
 fi
 
+
 if [ "$vtoy_display_mode" = "CLI" ]; then
     terminal_output  console
 elif [ "$vtoy_display_mode" = "serial" ]; then
@@ -1068,15 +1485,26 @@ else
     terminal_output  gfxterm
 fi
 
+
+if [ -n "$VTOY_PLUGIN_SYNTAX_ERROR" ]; then
+    clear
+    echo -e "\n Syntax error detected in ventoy.json, please check! \n"
+    echo -e " ventoy.json 文件中有语法错误，所有配置都不会生效，请检查！\n"
+    echo -e "\n press ENTER to continue (请按 回车 键继续) ..."
+    read vtInputKey 
+fi
+
 #export necessary variable
 export theme
 export gfxmode
-export vtoy_dev
+export gfxpayload
+export vtoydev
+export vtoy_path
+export vtdebug_flag
 export vtoy_iso_part
 export vtoy_efi_part
 export VENTOY_VERSION
-
-
+export VTOY_CUR_VIDEO_MODE
 
 
 #colect all image files (iso files)