X-Git-Url: https://glassweightruler.freedombox.rocks/gitweb/Ventoy.git/blobdiff_plain/7b08954e57f5cc35e13293fed03c33fbc7756bbc..HEAD:/INSTALL/tool/VentoyWorker.sh diff --git a/INSTALL/tool/VentoyWorker.sh b/INSTALL/tool/VentoyWorker.sh index ac2102c..7844b92 100644 --- a/INSTALL/tool/VentoyWorker.sh +++ b/INSTALL/tool/VentoyWorker.sh @@ -3,23 +3,25 @@ . ./tool/ventoy_lib.sh print_usage() { - + echo 'Usage: Ventoy2Disk.sh CMD [ OPTION ] /dev/sdX' echo ' CMD:' echo ' -i install Ventoy to sdX (fails if disk already installed with Ventoy)' - echo ' -I force install Ventoy to sdX (no matter installed or not)' + echo ' -I force install Ventoy to sdX (no matter if installed or not)' echo ' -u update Ventoy in sdX' echo ' -l list Ventoy information in sdX' echo '' echo ' OPTION: (optional)' echo ' -r SIZE_MB preserve some space at the bottom of the disk (only for install)' - echo ' -s/-S enable/disable secure boot support (default is disabled)' + echo ' -s/-S enable/disable secure boot support (default is enabled)' echo ' -g use GPT partition style, default is MBR (only for install)' echo ' -L Label of the 1st exfat partition (default is Ventoy)' + echo ' -n try non-destructive installation (only for install)' echo '' } +SECUREBOOT="YES" VTNEW_LABEL='Ventoy' RESERVE_SIZE_MB=0 while [ -n "$1" ]; do @@ -28,6 +30,8 @@ while [ -n "$1" ]; do elif [ "$1" = "-I" ]; then MODE="install" FORCE="Y" + elif [ "$1" = "-n" ]; then + NONDESTRUCTIVE="Y" elif [ "$1" = "-u" ]; then MODE="update" elif [ "$1" = "-l" ]; then @@ -57,8 +61,14 @@ while [ -n "$1" ]; do exit 1 fi DISK=$1 + # Resolve symlinks now, will be needed to look up information about the device in + # the /sys/ filesystem, for example /sys/class/block/${DISK#/dev/}/start + # The main use case is supporting /dev/disk/by-id/ symlinks instead of raw devices + if [ -L "$DISK" ]; then + DISK=$(readlink -e -n "$DISK") + fi fi - + shift done @@ -104,19 +114,19 @@ if [ "$MODE" = "list" ]; then version=$(get_disk_ventoy_version $DISK) if [ $? -eq 0 ]; then echo "Ventoy Version in Disk: $version" - + vtPart1Type=$(dd if=$DISK bs=1 count=1 skip=450 status=none | hexdump -n1 -e '1/1 "%02X"') - if [ "$vtPart1Type" = "EE" ]; then + if [ "$vtPart1Type" = "EE" ]; then echo "Disk Partition Style : GPT" else echo "Disk Partition Style : MBR" fi - + if check_disk_secure_boot $DISK; then echo "Secure Boot Support : YES" else echo "Secure Boot Support : NO" - fi + fi else echo "Ventoy Version: NA" fi @@ -125,11 +135,7 @@ if [ "$MODE" = "list" ]; then fi #check mountpoint -grep "^$DISK" /proc/mounts | while read mtline; do - mtpnt=$(echo $mtline | awk '{print $2}') - vtdebug "Trying to umount $mtpnt ..." - umount $mtpnt >/dev/null 2>&1 -done +check_umount_disk "$DISK" if grep "$DISK" /proc/mounts; then vterr "$DISK is already mounted, please umount it first!" @@ -137,14 +143,14 @@ if grep "$DISK" /proc/mounts; then fi #check swap partition -if swapon --help 2>&1 | grep -q '^ \-s,'; then +if swapon --help 2>&1 | grep -q '^ -s,'; then if swapon -s | grep -q "^${DISK}[0-9]"; then vterr "$DISK is used as swap, please swapoff it first!" exit 1 fi fi -#check access +#check access if dd if="$DISK" of=/dev/null bs=1 count=1 >/dev/null 2>&1; then vtdebug "root permission check ok ..." else @@ -160,13 +166,13 @@ if [ -d ./tmp_mnt ]; then umount ./tmp_mnt >/dev/null 2>&1 rm -rf ./tmp_mnt if [ -d ./tmp_mnt ]; then - vterr "tmp_mnt directory exits, please delete it first." + vterr "tmp_mnt directory exists, please delete it first." exit 1 fi fi -if [ "$MODE" = "install" ]; then +if [ "$MODE" = "install" -a -z "$NONDESTRUCTIVE" ]; then vtdebug "install Ventoy ..." if [ -n "$VTGPT" ]; then @@ -179,15 +185,28 @@ if [ "$MODE" = "install" ]; then fi else if parted -v > /dev/null 2>&1; then - PARTTOOL='parted' + PARTTOOL='parted' elif fdisk -v >/dev/null 2>&1; then - PARTTOOL='fdisk' + PARTTOOL='fdisk' else vterr "Both parted and fdisk are not found in the system, Ventoy can't create new partitions." exit 1 fi fi + if [ "$PARTTOOL" = "parted" ]; then + if parted -s $DISK p 2>&1 | grep -i -q 'sector size.*4096.*4096'; then + vterr "Currently Ventoy does not support 4K native device." + exit 1 + fi + else + if fdisk -l $DISK | grep -i -q 'sector size.*4096.*4096'; then + vterr "Currently Ventoy does not support 4K native device." + exit 1 + fi + fi + + version=$(get_disk_ventoy_version $DISK) if [ $? -eq 0 ]; then if [ -z "$FORCE" ]; then @@ -198,7 +217,7 @@ if [ "$MODE" = "install" ]; then exit 1 fi fi - + disk_sector_num=$(cat /sys/block/${DISK#/dev/}/size) disk_size_gb=$(expr $disk_sector_num / 2097152) @@ -210,7 +229,7 @@ if [ "$MODE" = "install" ]; then if [ -n "$RESERVE_SPACE" ]; then sum_size_mb=$(expr $RESERVE_SIZE_MB + $VENTOY_PART_SIZE_MB) reserve_sector_num=$(expr $sum_size_mb \* 2048) - + if [ $disk_sector_num -le $reserve_sector_num ]; then vterr "Can't reserve $RESERVE_SIZE_MB MB space from $DISK" exit 1 @@ -220,12 +239,12 @@ if [ "$MODE" = "install" ]; then #Print disk info echo "Disk : $DISK" parted -s $DISK p 2>&1 | grep Model - echo "Size : $disk_size_gb GB" + echo "Size : $disk_size_gb GB" if [ -n "$VTGPT" ]; then echo "Style: GPT" else echo "Style: MBR" - fi + fi echo '' if [ -n "$RESERVE_SPACE" ]; then @@ -254,12 +273,15 @@ if [ "$MODE" = "install" ]; then fi fi - if [ $disk_sector_num -le $VENTOY_SECTOR_NUM ]; then + if [ $disk_sector_num -le $VENTOY_SECTOR_NUM ]; then vterr "No enough space in disk $DISK" exit 1 fi - if ! dd if=/dev/zero of=$DISK bs=1 count=512 status=none conv=fsync; then + # check and umount + check_umount_disk "$DISK" + + if ! dd if=/dev/zero of=$DISK bs=64 count=512 status=none conv=fsync; then vterr "Write data to $DISK failed, please check whether it's in use." exit 1 fi @@ -282,99 +304,252 @@ if [ "$MODE" = "install" ]; then cluster_sectors=64 fi - PART1=$(get_disk_part_name $DISK 1) - PART2=$(get_disk_part_name $DISK 2) + PART1=$(get_disk_part_name $DISK 1) + PART2=$(get_disk_part_name $DISK 2) - mkexfatfs -n "$VTNEW_LABEL" -s $cluster_sectors ${PART1} + #clean part2 + dd status=none conv=fsync if=/dev/zero of=$DISK bs=512 count=32 seek=$part2_start_sector + + #format part1 + wait_and_create_part ${PART1} ${PART2} + if [ -b ${PART1} ]; then + vtinfo "Format partition 1 ${PART1} ..." + mkexfatfs -n "$VTNEW_LABEL" -s $cluster_sectors ${PART1} + if [ $? -ne 0 ]; then + echo "mkexfatfs failed, now retry..." + mkexfatfs -n "$VTNEW_LABEL" -s $cluster_sectors ${PART1} + if [ $? -ne 0 ]; then + echo "######### mkexfatfs failed, exit ########" + exit 1 + fi + else + echo "mkexfatfs success" + fi + else + vterr "${PART1} NOT exist" + fi vtinfo "writing data to disk ..." - dd status=none conv=fsync if=./boot/boot.img of=$DISK bs=1 count=446 - + if [ -n "$VTGPT" ]; then - echo -en '\x22' | dd status=none of=$DISK conv=fsync bs=1 count=1 seek=92 + echo -en '\x22' | dd status=none of=$DISK conv=fsync bs=1 count=1 seek=92 xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2014 seek=34 echo -en '\x23' | dd of=$DISK conv=fsync bs=1 count=1 seek=17908 status=none else xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2047 seek=1 fi + # check and umount + check_umount_disk "$DISK" + xzcat ./ventoy/ventoy.disk.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=$VENTOY_SECTOR_NUM seek=$part2_start_sector - + #test UUID testUUIDStr=$(vtoy_gen_uuid | hexdump -C) vtdebug "test uuid: $testUUIDStr" - + #disk uuid vtoy_gen_uuid | dd status=none conv=fsync of=${DISK} seek=384 bs=1 count=16 - + #disk signature vtoy_gen_uuid | dd status=none conv=fsync of=${DISK} skip=12 seek=440 bs=1 count=4 vtinfo "sync data ..." sync - + vtinfo "esp partition processing ..." + + if [ "$SECUREBOOT" != "YES" ]; then + sleep 2 + check_umount_disk "$DISK" + vtoycli partresize -s $DISK $part2_start_sector + fi + + echo "" + vtinfo "Install Ventoy to $DISK successfully finished." + echo "" + +elif [ "$MODE" = "install" -a -n "$NONDESTRUCTIVE" ]; then + vtdebug "non-destructive install Ventoy ..." + + version=$(get_disk_ventoy_version $DISK) + if [ $? -eq 0 ]; then + if [ -z "$FORCE" ]; then + vtwarn "$DISK already contains a Ventoy with version $version." + vtwarn "You can not do and don not need non-destructive installation." + vtwarn "" + exit 1 + fi + fi - sleep 1 - mtpnt=$(grep "^${PART2}" /proc/mounts | awk '{print $2}') - if [ -n "$mtpnt" ]; then - umount $mtpnt >/dev/null 2>&1 + disk_sector_num=$(cat /sys/block/${DISK#/dev/}/size) + disk_size_gb=$(expr $disk_sector_num / 2097152) + + if vtoycli partresize -t $DISK; then + OldStyle="GPT" + else + OldStyle="MBR" + fi + + #Print disk info + echo "Disk : $DISK" + parted -s $DISK p 2>&1 | grep Model + echo "Size : $disk_size_gb GB" + echo "Style: $OldStyle" + echo '' + + vtwarn "Attention:" + vtwarn "Ventoy will try non-destructive installation on $DISK if possible." + echo "" + + read -p 'Continue? (y/n) ' Answer + if [ "$Answer" != "y" ]; then + if [ "$Answer" != "Y" ]; then + exit 0 + fi + fi + + if [ $disk_sector_num -le $VENTOY_SECTOR_NUM ]; then + vterr "No enough space in disk $DISK" + exit 1 fi + + PART1=$(get_disk_part_name $DISK 1) + PART2=$(get_disk_part_name $DISK 2) + + #Part1 size in MB aligned with 4KB + PART1_SECTORS=$(cat /sys/class/block/${PART1#/dev/}/size) + PART1_4K=$(expr $PART1_SECTORS / 8) + PART1_MB=$(expr $PART1_4K / 256) + PART1_NEW_MB=$(expr $PART1_MB - 32) + + echo "$PART1 is ${PART1_MB}MB" + + #check partition layout + echo "check partition layout ..." + vtoycli partresize -c $DISK + vtRet=$? + if [ $vtRet -eq 0 ]; then + exit 1 + else + # check and umount + check_umount_disk "$DISK" + sleep 1 + check_umount_disk "$DISK" - if [ "$SECUREBOOT" != "YES" ]; then - mkdir ./tmp_mnt - - vtdebug "mounting part2 ...." - for tt in 1 2 3 4 5; do - if mount ${PART2} ./tmp_mnt > /dev/null 2>&1; then - vtdebug "mounting part2 success" - break - fi + if [ $vtRet -eq 1 ]; then + echo "Free space enough, start install..." + part2_start_sector=$(expr $PART1_SECTORS + 2048) + elif [ $vtRet -eq 2 ]; then + echo "We need to shrink partition 1 firstly ..." + + PART1_BLKID=$(blkid $PART1) + blkid $PART1 - mtpnt=$(grep "^${PART2}" /proc/mounts | awk '{print $2}') - if [ -n "$mtpnt" ]; then - umount $mtpnt >/dev/null 2>&1 - fi - sleep 2 - done - - rm -f ./tmp_mnt/EFI/BOOT/BOOTX64.EFI - rm -f ./tmp_mnt/EFI/BOOT/grubx64.efi - rm -f ./tmp_mnt/EFI/BOOT/BOOTIA32.EFI - rm -f ./tmp_mnt/EFI/BOOT/grubia32.efi - rm -f ./tmp_mnt/EFI/BOOT/MokManager.efi - rm -f ./tmp_mnt/EFI/BOOT/mmia32.efi - rm -f ./tmp_mnt/ENROLL_THIS_KEY_IN_MOKMANAGER.cer - mv ./tmp_mnt/EFI/BOOT/grubx64_real.efi ./tmp_mnt/EFI/BOOT/BOOTX64.EFI - mv ./tmp_mnt/EFI/BOOT/grubia32_real.efi ./tmp_mnt/EFI/BOOT/BOOTIA32.EFI - - for tt in 1 2 3; do - if umount ./tmp_mnt; then - vtdebug "umount part2 success" - rm -rf ./tmp_mnt - break + if echo $PART1_BLKID | grep -E -q -i 'TYPE=ntfs|TYPE=.ntfs'; then + echo "Partition 1 contains NTFS filesystem" + + which ntfsresize + if [ $? -ne 0 ]; then + echo "###[FAIL] ntfsresize not found. Please install ntfs-3g package." + exit 1 + fi + + echo "ntfsfix -b -d $PART1 ..." + ntfsfix -b -d $PART1 + + echo "ntfsresize --size ${PART1_NEW_MB}Mi $PART1 ..." + ntfsresize -f --size ${PART1_NEW_MB}Mi $PART1 + if [ $? -ne 0 ]; then + echo "###[FAIL] ntfsresize failed." + exit 1 + fi + elif echo $PART1_BLKID | grep -E -q -i 'TYPE=ext[2-4]|TYPE=.ext[2-4]'; then + echo "Partition 1 contains EXT filesystem" + + which resize2fs + if [ $? -ne 0 ]; then + echo "###[FAIL] resize2fs not found. Please install e2fsprogs package." + exit 1 + fi + + echo "e2fsck -f $PART1 ..." + e2fsck -f $PART1 + + echo "resize2fs $PART1 ${PART1_NEW_MB}M ..." + resize2fs $PART1 ${PART1_NEW_MB}M + if [ $? -ne 0 ]; then + echo "###[FAIL] resize2fs failed." + exit 1 + fi else - vtdebug "umount part2 failed, now retry..." - sleep 1 + echo "###[FAIL] Unsupported filesystem in partition 1." + exit 1 fi - done + + sync + PART1_NEW_END_MB=$(expr $PART1_NEW_MB + 1) + part2_start_sector=$(expr $PART1_NEW_END_MB \* 2048) + fi fi - echo "" - vtinfo "Install Ventoy to $DISK successfully finished." - echo "" + vtinfo "writing data to disk part2_start=$part2_start_sector ..." + + dd status=none conv=fsync if=./boot/boot.img of=$DISK bs=1 count=440 + + if [ "$OldStyle" = "GPT" ]; then + echo -en '\x22' | dd status=none of=$DISK conv=fsync bs=1 count=1 seek=92 + xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2014 seek=34 + echo -en '\x23' | dd of=$DISK conv=fsync bs=1 count=1 seek=17908 status=none + else + xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2047 seek=1 + fi + + xzcat ./ventoy/ventoy.disk.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=$VENTOY_SECTOR_NUM seek=$part2_start_sector + + #test UUID + testUUIDStr=$(vtoy_gen_uuid | hexdump -C) + vtdebug "test uuid: $testUUIDStr" + + #disk uuid + vtoy_gen_uuid | dd status=none conv=fsync of=${DISK} seek=384 bs=1 count=16 + + vtinfo "sync data ..." + sync + + vtinfo "esp partition processing ..." + if [ "$SECUREBOOT" != "YES" ]; then + vtoycli partresize -s $DISK $part2_start_sector + fi + + vtinfo "update partition table $DISK $part2_start_sector ..." + vtoycli partresize -p $DISK $part2_start_sector + if [ $? -eq 0 ]; then + sync + echo "" + vtinfo "Ventoy non-destructive installation on $DISK successfully finished." + echo "" + else + echo "" + vterr "Ventoy non-destructive installation on $DISK failed." + echo "" + fi else vtdebug "update Ventoy ..." oldver=$(get_disk_ventoy_version $DISK) if [ $? -ne 0 ]; then - vtwarn "$DISK does not contain Ventoy or data corrupted" - echo "" - vtwarn "Please use -i option if you want to install ventoy to $DISK" - echo "" - exit 1 + if is_disk_contains_ventoy $DISK; then + oldver="Unknown" + else + vtwarn "$DISK does not contain Ventoy or data corrupted" + echo "" + vtwarn "Please use -i option if you want to install ventoy to $DISK" + echo "" + exit 1 + fi fi #reserve secure boot option @@ -391,7 +566,7 @@ else vtinfo "Upgrade operation is safe, all the data in the 1st partition (iso files and other) will be unchanged!" echo "" - read -p "Update Ventoy $oldver ===> $curver Continue? (y/n)" Answer + read -p "Update Ventoy $oldver ===> $curver Continue? (y/n) " Answer if [ "$Answer" != "y" ]; then if [ "$Answer" != "Y" ]; then exit 0 @@ -401,13 +576,13 @@ else PART2=$(get_disk_part_name $DISK 2) SHORT_PART2=${PART2#/dev/} part2_start=$(cat /sys/class/block/$SHORT_PART2/start) - + PART1_TYPE=$(dd if=$DISK bs=1 count=1 skip=450 status=none | hexdump -n1 -e '1/1 "%02X"') - + #reserve disk uuid rm -f ./diskuuid.bin dd status=none conv=fsync if=${DISK} skip=384 bs=1 count=16 of=./diskuuid.bin - + dd status=none conv=fsync if=./boot/boot.img of=$DISK bs=1 count=440 dd status=none conv=fsync if=./diskuuid.bin of=$DISK bs=1 count=16 seek=384 rm -f ./diskuuid.bin @@ -417,16 +592,16 @@ else dd status=none conv=fsync if=${DISK} skip=2040 bs=512 count=8 of=./rsvdata.bin if [ "$PART1_TYPE" = "EE" ]; then - vtdebug "This is GPT partition style ..." + vtdebug "This is GPT partition style ..." echo -en '\x22' | dd status=none of=$DISK conv=fsync bs=1 count=1 seek=92 xzcat ./boot/core.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=2014 seek=34 echo -en '\x23' | dd of=$DISK conv=fsync bs=1 count=1 seek=17908 status=none else vtdebug "This is MBR partition style ..." - + PART1_ACTIVE=$(dd if=$DISK bs=1 count=1 skip=446 status=none | hexdump -n1 -e '1/1 "%02X"') PART2_ACTIVE=$(dd if=$DISK bs=1 count=1 skip=462 status=none | hexdump -n1 -e '1/1 "%02X"') - + vtdebug "PART1_ACTIVE=$PART1_ACTIVE PART2_ACTIVE=$PART2_ACTIVE" if [ "$PART1_ACTIVE" = "00" ] && [ "$PART2_ACTIVE" = "80" ]; then vtdebug "change 1st partition active, 2nd partition inactive ..." @@ -439,51 +614,30 @@ else dd status=none conv=fsync if=./rsvdata.bin seek=2040 bs=512 count=8 of=${DISK} rm -f ./rsvdata.bin + check_umount_disk "$DISK" + xzcat ./ventoy/ventoy.disk.img.xz | dd status=none conv=fsync of=$DISK bs=512 count=$VENTOY_SECTOR_NUM seek=$part2_start - sync - + + vtinfo "esp partition processing ..." if [ "$SECUREBOOT" != "YES" ]; then - mkdir ./tmp_mnt - - vtdebug "mounting part2 ...." - for tt in 1 2 3 4 5; do - if mount ${PART2} ./tmp_mnt > /dev/null 2>&1; then - vtdebug "mounting part2 success" - break - else - vtdebug "mounting part2 failed, now wait and retry..." - fi - sleep 2 - done - - rm -f ./tmp_mnt/EFI/BOOT/BOOTX64.EFI - rm -f ./tmp_mnt/EFI/BOOT/grubx64.efi - rm -f ./tmp_mnt/EFI/BOOT/BOOTIA32.EFI - rm -f ./tmp_mnt/EFI/BOOT/grubia32.efi - rm -f ./tmp_mnt/EFI/BOOT/MokManager.efi - rm -f ./tmp_mnt/EFI/BOOT/mmia32.efi - rm -f ./tmp_mnt/ENROLL_THIS_KEY_IN_MOKMANAGER.cer - mv ./tmp_mnt/EFI/BOOT/grubx64_real.efi ./tmp_mnt/EFI/BOOT/BOOTX64.EFI - mv ./tmp_mnt/EFI/BOOT/grubia32_real.efi ./tmp_mnt/EFI/BOOT/BOOTIA32.EFI - - - for tt in 1 2 3; do - if umount ./tmp_mnt > /dev/null 2>&1; then - vtdebug "umount part2 success" - rm -rf ./tmp_mnt - break - else - vtdebug "umount part2 failed, now retry..." - sleep 1 - fi - done + sleep 2 + check_umount_disk "$DISK" + vtoycli partresize -s $DISK $part2_start + fi + + + if [ "$PART1_TYPE" = "EE" ]; then + vtinfo "update esp partition attribute" + vtoycli gpt -f $DISK + sync fi + echo "" vtinfo "Update Ventoy on $DISK successfully finished." echo "" - + fi