X-Git-Url: https://glassweightruler.freedombox.rocks/gitweb/Ventoy.git/blobdiff_plain/ac3ab97686d73068f17267fc8360dce1efffc241..23f4f18e271fc98308b6af42b2bb0baf45a43e64:/INSTALL/grub/grub.cfg

diff --git a/INSTALL/grub/grub.cfg b/INSTALL/grub/grub.cfg
index 8f231a2..9f99605 100644
--- a/INSTALL/grub/grub.cfg
+++ b/INSTALL/grub/grub.cfg
@@ -65,10 +65,6 @@ function ventoy_vcfg_proc {
     fi
 }
 
-function ventoy_power {
-    configfile $prefix/power.cfg
-}
-
 function ventoy_diagnosis {
     vt_enum_video_mode    
     configfile $prefix/debug.cfg
@@ -90,6 +86,28 @@ function ventoy_ext_menu {
     fi
 }
 
+function ventoy_checksum {
+    if [ -f "${vtoy_iso_part}${VTOY_CHKSUM_FILE_PATH}" ]; then
+        configfile $prefix/checksum.cfg
+    fi
+}
+
+function ventoy_show_help {
+    if [ -f $prefix/help.tar.gz ]; then
+        if [ -z "$vtoy_help_txt_mem_addr" ]; then
+            vt_load_file_to_mem "auto" $prefix/help.tar.gz vtoy_help_txt_mem
+        fi
+
+        loopback vt_help_tarfs mem:${vtoy_help_txt_mem_addr}:size:${vtoy_help_txt_mem_size}
+        if [ -f "(vt_help_tarfs)/help/${VTOY_HELP_TXT_LANGUAGE}.txt" ]; then
+            cat "(vt_help_tarfs)/help/${VTOY_HELP_TXT_LANGUAGE}.txt"
+        else
+            cat "(vt_help_tarfs)/help/en_US.txt"
+        fi        
+        loopback -d vt_help_tarfs
+    fi
+}
+
 function get_os_type {
     set vtoy_os=Linux
     
@@ -107,6 +125,9 @@ function get_os_type {
         elif [ -e (loop)/bin/freebsd-version ]; then
             set vtoy_os=Unix
             set vt_unix_type=FreeBSD
+        elif [ -e (loop)/boot/kernel/geom_ventoy.ko ]; then
+            set vtoy_os=Unix
+            set vt_unix_type=FreeBSD
         elif vt_str_begin "$vt_system_id" "DragonFly"; then
             set vtoy_os=Unix
             set vt_unix_type=DragonFly
@@ -130,9 +151,22 @@ function get_os_type {
 
 function vt_check_compatible_pe {
     #Check for PE without external tools
-    if [ -f "$1/HBCD_PE.ini" ]; then
+    #set compatible if ISO file is less than 80MB
+    if [ $vt_chosen_size -gt 33554432 -a $vt_chosen_size -le 83886080 ]; then
+        set ventoy_compatible=YES    
+    fi
+
+    return
+}
+
+function vt_check_compatible_linux {
+    if vt_str_begin "$vt_volume_id" "embootkit"; then
+        set ventoy_compatible=YES
+    elif [ -e "$1/casper/tinycore.gz" ]; then
         set ventoy_compatible=YES
     fi
+
+    return
 }
 
 function locate_initrd {
@@ -161,7 +195,11 @@ function distro_specify_wim_patch {
         vt_windows_collect_wim_patch wim /BOOT/H3_7PE.WIM
         vt_windows_collect_wim_patch wim /BOOT/H3_8PE.WIM
         vt_windows_collect_wim_patch wim /BOOT/H3_81PE.WIM
-    fi
+    elif [ -d (loop)/2k10/winpe ]; then
+        vt_windows_collect_wim_patch wim /2k10/winpe/w1086pe.wim
+        vt_windows_collect_wim_patch wim /2k10/winpe/w8x86pe.wim
+        vt_windows_collect_wim_patch wim /2k10/winpe/w7x86pe.wim
+    fi  
 }
 
 function distro_specify_wim_patch_phase2 {
@@ -194,6 +232,8 @@ function distro_specify_initrd_file {
         vt_linux_specify_initrd_file /initrd.gz
     elif [ -e (loop)/slax/boot/initrfs.img ]; then
         vt_linux_specify_initrd_file /slax/boot/initrfs.img
+    elif [ -e (loop)/minios/boot/initrfs.img ]; then
+        vt_linux_specify_initrd_file /minios/boot/initrfs.img
     elif [ -e (loop)/pmagic/initrd.img ]; then
         vt_linux_specify_initrd_file /pmagic/initrd.img
     elif [ -e (loop)/boot/initrd.xz ]; then
@@ -208,7 +248,8 @@ function distro_specify_initrd_file {
         vt_linux_specify_initrd_file /boot/initramfs-x86_64.img
     elif [ -f (loop)/boot/isolinux/initramfs_data64.cpio.gz ]; then 
         vt_linux_specify_initrd_file /boot/isolinux/initramfs_data64.cpio.gz
-
+    elif [ -f (loop)/boot/initrd.img ]; then 
+        vt_linux_specify_initrd_file /boot/initrd.img
         
     fi
     
@@ -216,6 +257,10 @@ function distro_specify_initrd_file {
         vt_linux_specify_initrd_file /isolinux/initrd.gz
     fi
     
+    if vt_str_begin "$vt_volume_id" "QUBES"; then 
+        vt_linux_specify_initrd_file /images/pxeboot/initrd.img
+    fi
+    
     if [ "$vt_chosen_size" = "1133375488" ]; then
         if [ -d (loop)/boot/grub/x86_64-efi ]; then
             vt_cpio_busybox64 "64h"
@@ -313,6 +358,13 @@ function distro_specify_initrd_file_phase2 {
         vt_linux_specify_initrd_file /360Disk/initrd.gz
     elif [ -f (loop)/porteus/initrd.xz ]; then
         vt_linux_specify_initrd_file /porteus/initrd.xz
+    elif [ -f (loop)/pyabr/boot/initrfs.img ]; then
+        vt_linux_specify_initrd_file /pyabr/boot/initrfs.img
+    elif [ -f (loop)/initrd0.img ]; then
+        vt_linux_specify_initrd_file /initrd0.img
+    elif [ -f (loop)/sysresccd/boot/i686/sysresccd.img ]; then
+        vt_linux_specify_initrd_file /sysresccd/boot/i686/sysresccd.img
+    
     
     fi
 }
@@ -374,6 +426,11 @@ function ventoy_freebsd_proc {
     set vtFreeBsdDistro=FreeBSD
     set vt_freebsd_ver=xx
 
+    if [ -e (loop)/boot/kernel/geom_ventoy.ko ]; then
+        vt_unix_ko_fillmap /boot/kernel/geom_ventoy.ko
+        return
+    fi
+
     if vt_strstr "$vt_volume_id" "GHOSTBSD"; then
         ventoy_get_ghostbsd_ver "$1" "${chosen_path}"
     elif vt_strstr "$vt_volume_id" "FREENAS"; then
@@ -550,6 +607,22 @@ function uefi_windows_menu_func {
     fi
 }
 
+function uefi_find_replace_initrd {
+    if vt_get_efi_vdisk_offset "${1}${2}" vt_efivdisk_offset; then
+        loopback -s $vt_efivdisk_offset vtefivdisk "${1}${2}"
+        
+        unset vt_rp_initrd
+        vt_search_replace_initrd (vtefivdisk) vt_rp_initrd
+        
+        if [ -n "$vt_rp_initrd" ]; then
+            vt_add_replace_file $3 "$vt_rp_initrd"
+        fi
+
+        loopback -d vtefivdisk
+        ventoy_debug_pause
+    fi
+}
+
 function uefi_linux_menu_func {
     
     if [ "$ventoy_compatible" = "NO" ]; then    
@@ -631,6 +704,11 @@ function uefi_linux_menu_func {
             elif [ -f (loop)/loader/entries/pisi-efi-x86_64.conf ]; then
                 vt_add_replace_file $vtindex "EFI\\pisi\\initrd.img"
             fi
+
+            vt_get_replace_file_cnt vt_replace_cnt
+            if [ $vt_replace_cnt -eq 0 ]; then
+                uefi_find_replace_initrd "$1" "$2" $vtindex
+            fi
         elif [ -d (loop)/EFI/boot/entries ]; then
             if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then
                 vt_add_replace_file 0 "EFI\\parabolaiso\\parabolaiso.img"
@@ -638,6 +716,8 @@ function uefi_linux_menu_func {
                 vt_add_replace_file 0 "EFI\\hyperiso\\hyperiso.img"
             fi
         elif [ -d (loop)/EFI/BOOT/entries ]; then
+            vt_linux_get_main_initrd_index vtindex
+
             if [ -f (loop)/parabola/boot/x86_64/parabolaiso.img ]; then
                 vt_add_replace_file 0 "EFI\\parabolaiso\\parabolaiso.img"
             elif [ -f (loop)/parabola/boot/x86_64/initramfs-linux-libre.img ]; then
@@ -646,7 +726,9 @@ function uefi_linux_menu_func {
         elif [ -e (loop)/syslinux/alt0/full.cz ]; then
             vt_add_replace_file 0 "EFI\\BOOT\\full.cz"            
             set FirstTryBootFile='@EFI@BOOT@grubx64.efi'
-
+            
+        elif vt_str_begin "$vt_volume_id" "SolusLive"; then
+            vt_add_replace_file 0 "initrd"
 
         fi
         
@@ -664,7 +746,16 @@ function uefi_linux_menu_func {
         ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
         ventoy_cli_console     
 
+        unset vtGrub2Mode
         if vt_check_mode 3; then
+            set vtGrub2Mode=1
+        elif vt_str_begin "$vt_volume_id" "KRD"; then
+            if [ -f (loop)/boot/grub/grub.cfg.sig ]; then
+                set vtGrub2Mode=1
+            fi
+        fi
+
+        if [ -n "$vtGrub2Mode" ]; then
             ventoy_debug_pause
         else
             if [ "$VTOY_EFI_ARCH" != "mips" ]; then
@@ -731,6 +822,8 @@ function ventoy_reset_nojoliet {
     else
         vt_iso9660_nojoliet 0
     fi
+    
+    vt_append_extra_sector 0
 }
 
 function uefi_iso_menu_func {
@@ -757,6 +850,12 @@ function uefi_iso_menu_func {
     else
         set ventoy_fs_probe=iso9660
         ventoy_reset_nojoliet
+
+        # Lenovo EasyStartup need an addional sector for boundary check
+        if vt_str_begin "$vt_volume_id" "EasyStartup"; then
+            vt_skip_svd "${vtoy_iso_part}${vt_chosen_path}"
+            vt_append_extra_sector 1
+        fi
     fi
 
     loopback loop "${1}${chosen_path}"
@@ -791,6 +890,7 @@ function uefi_iso_menu_func {
     elif [ "$vtoy_os" = "Unix" ]; then
         uefi_unix_menu_func "$1" "${chosen_path}"
     else
+        vt_check_compatible_linux (loop)
         uefi_linux_menu_func  "$1" "${chosen_path}"
     fi
 
@@ -900,7 +1000,7 @@ function legacy_windows_menu_func {
             loopback loop "$1$2"
         fi
         
-        for file in "boot/bcd" "/efi/microsoft/boot/bcd" "SSTR/BCD"; do
+        for file in "boot/bcd" "/efi/microsoft/boot/bcd" "SSTR/BCD" "boot/bce"; do
             vt_windows_collect_wim_patch bcd (loop)/$file                
         done
         
@@ -940,7 +1040,14 @@ function legacy_linux_menu_func {
             set ventoy_fs_probe=iso9660
             loopback loop "$1$2"
         fi
-    
+
+        
+        if vt_syslinux_need_nojoliet "$1$2"; then
+            vt_iso9660_nojoliet 1
+            loopback -d loop
+            loopback loop "$1$2"
+        fi
+
         vt_load_cpio  $vtoy_path  "$2" "$1" "busybox=$ventoy_busybox_ver"
 
         vt_linux_clear_initrd
@@ -1020,7 +1127,7 @@ function legacy_linux_menu_func {
             ventoy_gui_console
         else
             ventoy_acpi_param ${vtoy_chain_mem_addr} 2048
-            linux16   $vtoy_path/ipxe.krn ${vtdebug_flag}  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}
+            linux16   $vtoy_path/ipxe.krn ${vtdebug_flag}  mem:${vtoy_chain_mem_addr}:size:${vtoy_chain_mem_size}            
             boot
         fi
     else
@@ -1087,6 +1194,7 @@ function legacy_iso_menu_func {
     elif [ "$vtoy_os" = "Unix" ]; then
         legacy_unix_menu_func "$1" "${chosen_path}"
     else
+        vt_check_compatible_linux (loop)
         legacy_linux_menu_func  "$1" "${chosen_path}"
     fi
 }
@@ -1169,9 +1277,8 @@ function iso_common_menuentry {
             echo -e "\n $vt_volume_space $vt_chosen_size $vt_chosen_size_mod\n"
             echo -e "\n The size of the iso file \"$vt_chosen_size\" is invalid. File corrupted ?\n"
             echo -e " 此ISO文件的大小 \"$vt_chosen_size\" 有问题，请确认文件是否损坏。\n"
-            echo -e "\n press ENTER to exit (请按 回车 键返回) ..."
+            echo -e "\n press ENTER to continue (请按 回车 键继续) ..."
             read vtInputKey
-            return
         fi
     fi
     
@@ -1295,7 +1402,19 @@ function efi_common_menuentry {
         return
     fi
     
-    vt_concat_efi_iso "${vtoy_iso_part}${vt_chosen_path}" vtoy_iso_buf
+    unset vt_vlnk_dst
+    if vt_is_vlnk_name "${vt_chosen_path}"; then
+        vt_get_vlnk_dst "${vtoy_iso_part}${vt_chosen_path}" vt_vlnk_dst
+        if [ -z "$vt_vlnk_dst" ]; then
+            echo -e "\n### VLNK FILE NOT FOUND ###\n### VLNK 文件不存在 ###\n"            
+            ventoy_pause
+            return
+        fi
+    else
+        vt_vlnk_dst="${vtoy_iso_part}${vt_chosen_path}"
+    fi
+    
+    vt_concat_efi_iso "${vt_vlnk_dst}" vtoy_iso_buf
     
     ventoy_debug_pause
     
@@ -1307,7 +1426,7 @@ function efi_common_menuentry {
     
     if [ -n "$vtoy_dotefi_retry" ]; then
         unset vtoy_dotefi_retry
-        chainloader "${vtoy_iso_part}${vt_chosen_path}"
+        chainloader "${vt_vlnk_dst}"
         boot
     fi
     
@@ -1343,17 +1462,6 @@ function vhdboot_common_func {
 }
 
 function vhd_common_menuentry {
-
-    if [ "$VTOY_VHD_NO_WARNING" != "1" ]; then
-        if [ "$vtoy_iso_fs" != "ntfs" ]; then
-            echo -e "!!! WARNING !!!\n"
-            echo -e "\nPartition1 ($vtoy_iso_fs) is NOT ntfs, the VHD(x) file may not boot normally \n"
-            echo -e "\nVHD(x) 文件所在分区不是 ntfs 格式, 可能无法正常启动 \n\n"
-            echo -n "press ENTER to continue boot (请按 回车 键继续) ..."    
-            read vtInputKey
-        fi
-    fi
-
     vt_chosen_img_path vt_chosen_path vt_chosen_size
     
     if vt_check_password "${vt_chosen_path}"; then
@@ -1364,7 +1472,28 @@ function vhd_common_menuentry {
         return
     fi
     
-    vhdboot_common_func "${vt_chosen_path}"
+    unset vt_vlnk_dst
+    if vt_is_vlnk_name "${vt_chosen_path}"; then
+        vt_get_vlnk_dst "${vtoy_iso_part}${vt_chosen_path}" vt_vlnk_dst
+        if [ -z "$vt_vlnk_dst" ]; then
+            echo -e "\n### VLNK FILE NOT FOUND ###\n### VLNK 文件不存在 ###\n"            
+            ventoy_pause
+            return
+        fi
+    else
+        vt_vlnk_dst="${vt_chosen_path}"
+        if [ "$VTOY_VHD_NO_WARNING" != "1" ]; then
+            if [ "$vtoy_iso_fs" != "ntfs" ]; then
+                echo -e "!!! WARNING !!!\n"
+                echo -e "\nPartition1 ($vtoy_iso_fs) is NOT ntfs, the VHD(x) file may not boot normally \n"
+                echo -e "\nVHD(x) 文件所在分区不是 ntfs 格式, 可能无法正常启动 \n\n"
+                echo -n "press ENTER to continue boot (请按 回车 键继续) ..."    
+                read vtInputKey
+            fi
+        fi
+    fi
+    
+    vhdboot_common_func "${vt_vlnk_dst}"
 }
 
 function vhd_unsupport_menuentry {
@@ -1399,7 +1528,7 @@ function vtoyboot_common_func {
                 ventoy_pause
             fi
         fi
-    
+
         vt_img_sector "${1}"
         vt_raw_chain_data "${1}"
 
@@ -1440,7 +1569,19 @@ function vtoy_common_menuentry {
         return
     fi
     
-    vtoyboot_common_func "${vtoy_iso_part}${vt_chosen_path}"
+    unset vt_vlnk_dst
+    if vt_is_vlnk_name "${vt_chosen_path}"; then
+        vt_get_vlnk_dst "${vtoy_iso_part}${vt_chosen_path}" vt_vlnk_dst
+        if [ -z "$vt_vlnk_dst" ]; then
+            echo -e "\n### VLNK FILE NOT FOUND ###\n### VLNK 文件不存在 ###\n"            
+            ventoy_pause
+            return
+        fi
+    else
+        vt_vlnk_dst="${vtoy_iso_part}${vt_chosen_path}"
+    fi
+    
+    vtoyboot_common_func "${vt_vlnk_dst}"
 }
 
 function vtoy_unsupport_menuentry {
@@ -1453,6 +1594,11 @@ function vtoy_unsupport_menuentry {
 #============================================================#
 #
 
+function only_uefi_tip {
+    echo -e "\n This IMG file is only supported in UEFI mode. \n"
+    echo -e "\n press ENTER to exit ..."
+    read vtInputKey 
+}
 
 function ventoy_img_easyos {
     vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
@@ -1588,9 +1734,23 @@ function ventoy_img_ubos {
 }
 
 function ventoy_img_recalbox {
+    if [ $vtoy_img_max_part_end -gt $vt_chosen_size ]; then
+        echo -e "\nPlease extend the img file size before boot it. \n"
+        ventoy_pause
+        return
+    fi
+
     vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
     vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
 
+    if [ -e (vtimghd,1)/boot/recalbox ]; then
+        loopback recalbox (vtimghd,1)/boot/recalbox
+        vt_get_lib_module_ver (recalbox) /lib/modules/ vt_module_ver
+        if [ -n "$vt_module_ver" ]; then        
+            vt_img_extra_initrd_append  (recalbox)/lib/modules/$vt_module_ver/kernel/drivers/md/dm-mod.ko
+        fi
+    fi
+
     ventoy_debug_pause
 
     #boot image file
@@ -1604,6 +1764,23 @@ function ventoy_img_recalbox {
     vt_unset_boot_opt
 }
 
+function ventoy_img_esysrescue {
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=esysrescue
+    vt_img_hook_root
+
+    set root=(vtimghd,1)
+    configfile (vtimghd,1)/boot/grub/grub.cfg
+
+    vt_img_unhook_root
+    vt_unset_boot_opt
+}
+
 function ventoy_img_batocera {
     vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
     vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
@@ -1626,14 +1803,25 @@ function ventoy_img_openwrt {
         set ventoy_busybox_ver=64
     fi
 
-    if [ ! -f ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz ]; then
-        ventoy_gui_console
-        echo -e "\n ventoy_openwrt.xz not found. Please refer https://www.ventoy.net/en/doc_openwrt.html.\n"
-        echo -e " 未找到 ventoy_openwrt.xz 文件。请参考 https://www.ventoy.net/cn/doc_openwrt.html\n"
-        echo -e "\n press ENTER to exit (请按 回车 键返回) ..."
-        read vtInputKey
-        ventoy_cli_console
-        return
+    vt_fs_enum_1st_dir (vtimghd,2) /lib/modules/ vt_dir_name
+
+    if [ -f (vtimghd,2)/lib/modules/$vt_dir_name/dm-mod.ko ]; then
+        set openwrt_plugin_need=0
+        vt_img_extra_initrd_append  (vtimghd,2)/lib/modules/$vt_dir_name/dm-mod.ko
+        if [ -f (vtimghd,2)/lib/modules/$vt_dir_name/dax.ko ]; then
+            vt_img_extra_initrd_append  (vtimghd,2)/lib/modules/$vt_dir_name/dax.ko
+        fi
+    else
+        set openwrt_plugin_need=1
+        if [ ! -f ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz ]; then
+            ventoy_gui_console
+            echo -e "\n ventoy_openwrt.xz not found. Please refer https://www.ventoy.net/en/doc_openwrt.html.\n"
+            echo -e " 未找到 ventoy_openwrt.xz 文件。请参考 https://www.ventoy.net/cn/doc_openwrt.html\n"
+            echo -e "\n press ENTER to exit (请按 回车 键返回) ..."
+            read vtInputKey
+            ventoy_cli_console
+            return
+        fi
     fi
 
     if vt_img_check_range "${vtoy_iso_part}${vt_chosen_path}"; then
@@ -1648,12 +1836,14 @@ function ventoy_img_openwrt {
         return
     fi
     
-
     vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=$ventoy_busybox_ver"
     vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
 
-    vt_img_extra_initrd_append  ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz
-    
+    if [ $openwrt_plugin_need -eq 1 ]; then
+        if [ -f ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz ]; then
+            vt_img_extra_initrd_append  ${vtoy_iso_part}/ventoy/ventoy_openwrt.xz
+        fi
+    fi
 
     #boot image file
     vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=openwrt
@@ -1683,6 +1873,74 @@ function ventoy_img_tails {
     vt_unset_boot_opt
 }
 
+function ventoy_img_fydeos {
+    if [ "$grub_platform" = "pc" ]; then
+        only_uefi_tip
+        return
+    fi
+
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=64"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=fydeos
+    vt_img_hook_root
+
+    set grubdisk=vtimghd
+    set grubpartA=(vtimghd,3)
+    set grubpartB=(vtimghd,5)
+    set linuxpartA=(sda,3)
+    set linuxpartB=(sda,5)
+
+    set root=(vtimghd,12)
+    configfile (vtimghd,12)/efi/boot/grub.cfg
+
+    vt_img_unhook_root
+    vt_unset_boot_opt
+    
+    unset grubdisk
+    unset grubpartA
+    unset grubpartB
+    unset linuxpartA
+    unset linuxpartB
+}
+
+function ventoy_img_cloudready {
+    if [ "$grub_platform" = "pc" ]; then
+        only_uefi_tip
+        return
+    fi
+
+    vt_load_cpio  $vtoy_path  "${vt_chosen_path}" ${vtoy_iso_part} "busybox=64"
+    vt_trailer_cpio ${vtoy_iso_part} "${vt_chosen_path}" noinit
+
+    ventoy_debug_pause
+
+    #boot image file
+    vt_set_boot_opt rdinit=/vtoy/vtoy ventoyos=cloudready
+    vt_img_hook_root
+
+    set grubdisk=vtimghd
+    set grubpartA=(vtimghd,3)
+    set grubpartB=(vtimghd,5)
+    set linuxpartA=(sda,3)
+    set linuxpartB=(sda,5)
+
+    set root=(vtimghd,12)    
+    configfile (vtimghd,12)/efi/boot/grub.cfg
+
+    vt_img_unhook_root
+    vt_unset_boot_opt
+    
+    unset grubdisk
+    unset grubpartA
+    unset grubpartB
+    unset linuxpartA
+    unset linuxpartB
+}
+
 function ventoy_img_memtest86 {      
     chainloader (vtimghd,1)/efi/boot/BOOTX64.efi
     boot
@@ -1695,9 +1953,19 @@ function img_unsupport_tip {
     read vtInputKey 
 }
 
+function legacy_img_memdisk {
+    linux16   $vtoy_path/memdisk
+    echo "Loading img file to memory ..."
+    initrd16  "${1}${2}"
+    
+    ventoy_cli_console
+    boot
+}
+
 function img_common_menuentry {
     set ventoy_compatible=YES
     set ventoy_busybox_ver=32
+    unset LoadIsoEfiDriver
 
     vt_chosen_img_path vt_chosen_path vt_chosen_size
     
@@ -1709,8 +1977,11 @@ function img_common_menuentry {
         return
     fi
 
-    if [ -d (vtimghd)/ ]; then
-        loopback -d vtimghd
+    if [ "$grub_platform" = "pc" ]; then
+        if vt_check_mode 0; then
+            legacy_img_memdisk $vtoy_iso_part "$vt_chosen_path"
+            return
+        fi
     fi
 
     loopback vtimghd "${vtoy_iso_part}${vt_chosen_path}"
@@ -1728,19 +1999,26 @@ function img_common_menuentry {
 
 
     vt_get_fs_label (vtimghd,1) vtImgHd1Label
-    if [ -d (vtimghd,2)/lib ]; then        
+
+    if [ "$vtImgHd1Label" = "STATE" ]; then
+        vt_get_fs_label (vtimghd,3) vtImgHd3Label
+    elif [ -d (vtimghd,2)/lib ]; then
         vt_get_fs_label (vtimghd,2) vtImgHd2Label
     fi
-    
+
     if [ -e (vtimghd,1)/etc/hostname ]; then
         vt_1st_line (vtimghd,1)/etc/hostname vtImgHostname
     fi
-    
-    
-    if [ -e (vtimghd,1)/easy.sfs ]; then
-        ventoy_img_easyos
-    elif [ -e (vtimghd,1)/volumio.initrd ]; then
-        ventoy_img_volumio
+
+    if vt_str_begin "$vtImgHd3Label" "ROOT-"; then
+        if [ -f (vtimghd,3)/etc/os-release.d/ID ]; then 
+            vt_1st_line (vtimghd,3)/etc/os-release.d/ID vt_release_line1
+            if [ vt_str_begin "$vt_release_line1" "FydeOS" ]; then
+                ventoy_img_fydeos
+            fi
+        elif [ -f (vtimghd,3)/etc/cloudready-release ]; then
+            ventoy_img_cloudready
+        fi
     elif vt_str_begin "$vtImgHd1Label" "LAKKA"; then
         ventoy_img_openelec lakka
     elif vt_str_begin "$vtImgHd1Label" "LIBREELEC"; then
@@ -1753,8 +2031,14 @@ function img_common_menuentry {
         ventoy_img_batocera
     elif vt_str_begin "$vtImgHd1Label" "Tails"; then
         ventoy_img_tails
-    elif [ "$vtImgHd2Label" = "RECALBOX" ]; then
+    elif [ "$vtImgHd2Label" = "RECALBOX" -o "$vtImgHd1Label" = "RECALBOX" ]; then
         ventoy_img_recalbox
+    elif [ "$vtImgHd1Label" = "ESYSRESCUE" ]; then
+        ventoy_img_esysrescue
+    elif [ -e (vtimghd,1)/easy.sfs ]; then
+        ventoy_img_easyos
+    elif [ -e (vtimghd,1)/volumio.initrd ]; then
+        ventoy_img_volumio
     elif [ -f (vtimghd,2)/loader/entries/ubos.conf ]; then
         ventoy_img_ubos
     elif [ -f (vtimghd,2)/etc/openwrt_version ]; then
@@ -1764,7 +2048,7 @@ function img_common_menuentry {
             img_unsupport_tip
         else
             ventoy_img_memtest86            
-        fi
+        fi    
     else
         vt_linux_chain_data "${vtoy_iso_part}${vt_chosen_path}"
         ventoy_acpi_param ${vtoy_chain_mem_addr} 512
@@ -1777,6 +2061,8 @@ function img_common_menuentry {
         fi
     fi
 
+    loopback -d vtimghd
+
     set root=$vtback_root
     vt_pop_last_entry
     set theme=$vtback_theme
@@ -1796,7 +2082,7 @@ function img_unsupport_menuentry {
 #############################################################
 #############################################################
 
-set VENTOY_VERSION="1.0.45"
+set VENTOY_VERSION="1.0.69"
 
 #ACPI not compatible with Window7/8, so disable by default
 set VTOY_PARAM_NO_ACPI=1
@@ -1812,10 +2098,15 @@ set VTOY_GRUB2_MODE_STR="GRUB2 Mode"
 set VTOY_WIMBOOT_MODE_STR="WIMBOOT Mode"
 set VTOY_ISO_UEFI_DRV_STR="UEFI FS"
 
-set VTOY_F2_CMD="ventoy_power"
+set VTOY_F2_CMD="vt_browser_disk"
 set VTOY_F4_CMD="ventoy_localboot"
 set VTOY_F5_CMD="ventoy_diagnosis"
 set VTOY_F6_CMD="ventoy_ext_menu"
+set VTOY_HELP_CMD="ventoy_show_help"
+set VTOY_CHKSUM_CMD="ventoy_checksum"
+set VTOY_HELP_TXT_LANGUAGE="en_US"
+set VTOY_CHKSUM_FILE_PATH="X"
+
 
 if [ "$grub_platform" = "pc" ]; then
     set VTOY_TEXT_MENU_VER="Ventoy $VENTOY_VERSION BIOS  www.ventoy.net"
@@ -1865,7 +2156,10 @@ else
     set vtoydev=$vtoy_dev
     set vtoy_iso_part=($vtoy_dev,1)
     set vtoy_efi_part=($vtoy_dev,2)
-    loadfont unicode
+    
+    vt_load_file_to_mem "auto" $prefix/fonts/unicode.pf2 vtoy_font_mem
+    loadfont mem:${vtoy_font_mem_addr}:size:${vtoy_font_mem_size}
+
     set vt_plugin_path=$vtoy_iso_part
 fi
 
@@ -1874,9 +2168,11 @@ vt_load_part_table $vtoydev
 
 #Load Plugin
 if [ -f $vtoy_iso_part/ventoy/ventoy.json ]; then
-   clear
-   vt_load_plugin $vtoy_iso_part
-   clear
+    clear
+    vt_load_plugin $vtoy_iso_part
+    clear
+else
+    vt_check_json_path_case $vtoy_iso_part
 fi
 
 if [ -n "$VTOY_MENU_TIMEOUT" ]; then
@@ -1900,12 +2196,13 @@ fi
 
 if [ $VTOY_DEFAULT_MENU_MODE -eq 0 ]; then
     set VTOY_F3_CMD="vt_dynamic_menu 1 1"
-    set VTOY_HOTKEY_TIP="F1:Memdisk  F2:Power  F3:TreeView  F4:Localboot  F5:Tools  F6:ExMenu"
+    set VTOY_HOTKEY_TIP="h:Help  F1:Memdisk  F2:Browser  F3:TreeView  F4:Localboot  F5:Tools  F6:ExMenu"
 else
     set VTOY_F3_CMD="vt_dynamic_menu 1 0"
-    set VTOY_HOTKEY_TIP="F1:Memdisk  F2:Power  F3:ListView  F4:Localboot  F5:Tools  F6:ExMenu"
+    set VTOY_HOTKEY_TIP="h:Help  F1:Memdisk  F2:Browser  F3:ListView  F4:Localboot  F5:Tools  F6:ExMenu"
 fi
 
+terminal_output  console
 
 if [ -n "$vtoy_gfxmode" ]; then
     set gfxmode=$vtoy_gfxmode
@@ -1943,14 +2240,30 @@ if [ -n "$VTOY_DEFAULT_KBD_LAYOUT" ]; then
     set_keyboard_layout "$VTOY_DEFAULT_KBD_LAYOUT"
 fi
 
+if [ -n "$VTOY_PLUGIN_PATH_CASE_MISMATCH" ]; then
+    clear
+    echo "$VTOY_PLUGIN_PATH_CASE_MISMATCH"
+    echo -e "\n\nPath case does not match! ventoy directory and ventoy.json MUST be all lowercase!"
+    echo -e "\n路径大小写不匹配！ventoy 目录和 ventoy.json 文件的名字必须是全部小写，请修正！"
+    echo -e "\n\npress ENTER to continue (请按回车键继续) ..."
+    read vtInputKey
+fi
+
 if [ -n "$VTOY_PLUGIN_SYNTAX_ERROR" ]; then
     clear
-    echo -e "\n Syntax error detected in ventoy.json, please check! \n"
-    echo -e " ventoy.json 文件中有语法错误，所有配置都不会生效，请检查！\n"
+    if [ -n "$VTOY_PLUGIN_ENCODE_ERROR" ]; then
+        echo -e "\n Encoding type for ventoy.json is not supported, please convert to UTF-8.\n"
+        echo -e " ventoy.json 文件编码格式不支持，请转换为 UTF-8 编码格式！\n"
+    else
+        echo -e "\n Syntax error detected in ventoy.json, please check! \n"
+        echo -e " ventoy.json 文件中有语法错误，所有配置都不会生效，请检查！\n"         
+    fi
+
     echo -e "\n press ENTER to continue (请按 回车 键继续) ..."
-    read vtInputKey 
+    read vtInputKey
 fi
 
+
 for vtTFile in ventoy.json ventoy_grub.cfg; do
     if [ -f $vtoy_efi_part/ventoy/$vtTFile ]; then
         clear
@@ -1977,6 +2290,20 @@ export vtoy_efi_part
 export VENTOY_VERSION
 export VTOY_CUR_VIDEO_MODE
 export VTOY_EFI_ARCH
+export VTOY_MEM_DISK_STR
+export VTOY_ISO_RAW_STR
+export VTOY_GRUB2_MODE_STR
+export VTOY_WIMBOOT_MODE_STR
+export VTOY_ISO_UEFI_DRV_STR
+export VTOY_F2_CMD
+export VTOY_F4_CMD
+export VTOY_F5_CMD
+export VTOY_F6_CMD
+export VTOY_HELP_CMD
+export VTOY_CHKSUM_CMD
+export VTOY_HELP_TXT_LANGUAGE
+export VTOY_CHKSUM_FILE_PATH
+
 
 #special VTOY_DEFAULT_IMAGE process
 if [ -n "$VTOY_DEFAULT_IMAGE" ]; then
@@ -1992,9 +2319,7 @@ if [ -n "$VTOY_DEFAULT_IMAGE" ]; then
         export timeout
         export default
         
-        if [ "$vtHotkey" = "F2" ]; then
-            ventoy_power
-        elif [ "$vtHotkey" = "F4" ]; then
+        if [ "$vtHotkey" = "F4" ]; then
             ventoy_localboot
         elif [ "$vtHotkey" = "F5" ]; then
             ventoy_diagnosis