INSTALL/README

   1
   2 ========== Ventoy2Disk.sh ===============
   3
   4 sudo sh Ventoy2Disk.sh { -i | -I | -u } /dev/sdX   sdX is the USB device, for example /dev/sdb.
   5
   6 Ventoy2Disk.sh CMD [ OPTION ] /dev/sdX
   7   CMD:
   8     -i   install ventoy to sdX (fail if disk already installed with ventoy)
   9     -I   force install ventoy to sdX (no matter installed or not)
  10     -u   update ventoy in sdX
  11
  12   OPTION: (optional)
  13    -r SIZE_MB  preserve some space at the bottom of the disk (only for install)
  14    -s          enable secure boot support (default is disabled)
  15    -g          use GPT partition style, default is MBR style (only for install)
  16
  17 Please refer https://www.ventoy.net/en/doc_start.html for details.
  18
  19
  20 ========== VentoyWeb.sh ===============
  21 1. sudo sh VentoyWeb.sh
  22 2. open your browser and visit http://127.0.0.1:24680
  23
  24 ========== VentoyWebDeepin.sh ===============
  25 1. sudo sh VentoyWebDeepin.sh
  26
  27
  28 ========== CreatePersistentImg.sh ===============
  29
  30 sudo sh CreatePersistentImg.sh  [ -s SIZE_IN_MB ] [ -t FSTYPE ] [ -l LABEL ]   for example:
  31
  32 sh CreatePersistentImg.sh                 ---->  persistence.dat in 1GB size and ext4 filesystem and casper-rw label
  33 sh CreatePersistentImg.sh -l MX-Persist   ---->  persistence.dat in 1GB size and ext4 filesystem and MX-Persist label
  34 sh CreatePersistentImg.sh -s 2048         ---->  persistence.dat in 2GB size and ext4 filesystem and casper-rw label
  35 sh CreatePersistentImg.sh -s 4096 -t xfs  ---->  persistence.dat in 4GB size and xfs  filesystem  (ext2/3/4 xfs are supported)  and casper-rw label
  36
  37 Please refer https://www.ventoy.net/en/plugin_persistence.html for details.
  38
  39
  40
  41
  42